[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: A dmesg boot log for analysis
From: William Guynes <hf2u82htehkzqi82tkp1 () guynes ! net>
Date: 2002-01-12 6:03:45
[Download RAW message or body]
This is a dmesg boot log. The log requested that I mail this
information to you.
--
William Guynes
["dmesg" (TEXT/PLAIN)]
Linux version 2.2.19pre17 (root@llama) (gcc version 2.95.2 20000220 (Debian \
GNU/Linux)) #1 SMP Wed Jan 9 21:38:18 CST 2002 BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 0fef0000 @ 00100000 (usable)
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: Product ID: APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 0
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
I/O APIC #2 Version 2 at 0xFEC00000.
Processors: 1
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 900071 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1795.68 BogoMIPS
Memory: 257464k/262080k available (1256k kernel code, 424k reserved, 2864k data, 72k \
init) Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 64K
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 64K
per-CPU timeslice cutoff: 12.48 usecs.
CPU0: AMD Duron(tm) stepping 01
calibrating APIC timer ...
..... CPU clock speed is 900.0385 MHz.
..... system bus clock speed is 200.0084 MHz.
Error: only one processor found.
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not \
connected. number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178002
....... : max redirection entries: 0017
....... : IO APIC version: 0002
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 0 0 0 0 0 1 1 71
06 000 00 0 0 0 0 0 1 1 79
07 000 00 0 0 0 0 0 1 1 81
08 000 00 0 0 0 0 0 1 1 89
09 0FF 0F 1 1 0 1 0 1 1 91
0a 0FF 0F 1 1 0 1 0 1 1 99
0b 0FF 0F 1 1 0 1 0 1 1 A1
0c 000 00 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 B1
0f 000 00 0 0 0 0 0 1 1 B9
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xfdb31
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 5T060H6, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: Maxtor 5T060H6, 58644MB w/2048kB Cache, CHS=7476/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
(scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 0/13/0
(scsi0) Wide Channel, SCSI ID=15, 16/255 SCBs
(scsi0) Cables present (Int-50 YES, Int-68 NO, Ext-68 NO)
(scsi0) Downloading sequencer code... 422 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AHA-294X Ultra SCSI host adapter>
scsi : 1 host.
Vendor: SEAGATE Model: ST19171N Rev: 0019
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 3, lun 0
(scsi0:0:3:1) Synchronous at 20.0 Mbyte/sec, offset 15.
Vendor: NEC Model: CD-ROM DRIVE:462 Rev: 1.13
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:0:7:1) Synchronous at 10.0 Mbyte/sec, offset 15.
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB]
ne2k-pci.c: v1.02 for Linux 2.2, 10/19/2000, D. Becker/P. Gortmaker, \
http://www.scyld.com/network/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'Winbond 89C940' at I/O 0xd800, IRQ 9.
eth0: Winbond 89C940 found at 0xd800, IRQ 9, 00:20:78:11:81:95.
ne2k-pci.c: PCI NE2000 clone 'Winbond 89C940' at I/O 0xd400, IRQ 10.
eth1: Winbond 89C940 found at 0xd400, IRQ 10, 00:20:78:1A:AE:C7.
Partition check:
sda: sda1 sda2 sda3
hda: hda1 hda2
NTFS version 000607
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 72k freed
Adding Swap: 265032k swap-space (priority -1)
-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic