[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-smp
Subject:    unexpected IO-APIC
From:       root <root () zon11 ! physd ! amu ! edu ! pl>
Date:       2001-12-21 10:32:52
[Download RAW message or body]

Dear developers,

I have found a message `unexpected IO-APIC' in my dmesg file, so I am
sending to you the dsmg file. My motherboard is Asus CUV4X-D (Dual socket
370, Apollo Pro133A chipset).

Best regards,
                  Ryszard Tanas

["dmesg" (TEXT/PLAIN)]

Linux version 2.2.20 (root@zon11) (gcc version 2.95.4 20011006 (Debian prerelease)) \
#1 SMP Thu Dec 20 16:21:27 CET 2001 BIOS-provided physical RAM map:
 BIOS-e820: 0009f000 @ 00000000 (usable)
 BIOS-e820: 1fefc000 @ 00100000 (usable)
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #3 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 870603 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1736.70 BogoMIPS
Memory: 517244k/524272k available (1000k kernel code, 424k reserved, 5548k data, 56k \
init) Dentry hash table entries: 65536 (order 7, 512k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 131072 (order 7, 512k)
256K L2 cache (8 way)
CPU: L2 Cache: 256K
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
per-CPU timeslice cutoff: 50.02 usecs.
CPU3: Intel Pentium III (Coppermine) stepping 0a
calibrating APIC timer ... 
..... CPU clock speed is 870.5472 MHz.
..... system bus clock speed is 133.9302 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 1736.70 BogoMIPS
Intel machine check reporting enabled on CPU#0.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3473.40 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-5, 2-10, 2-11, 2-13, 2-17, 2-20, 2-21, 2-22, 2-23 not \
connected. number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178011
.......     : max redirection entries: 0017
.......     : IO APIC version: 0011
 WARNING: unexpected IO-APIC, please mail
          to linux-smp@vger.kernel.org
.... register #02: 01000000
.......     : arbitration: 01
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 0FF 0F  0    1    1   1   1    1    1    51
 01 0FF 0F  1    0    0   0   0    1    1    59
 02 0FF 0F  0    0    0   0   0    1    1    51
 03 0FF 0F  1    0    0   0   0    1    1    61
 04 0FF 0F  1    0    0   0   0    1    1    69
 05 000 00  1    0    0   0   0    0    0    00
 06 0FF 0F  1    0    0   0   0    1    1    71
 07 0FF 0F  1    0    0   0   0    1    1    79
 08 0FF 0F  1    0    0   0   0    1    1    81
 09 0FF 0F  1    0    0   0   0    1    1    89
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 0FF 0F  1    0    0   0   0    1    1    91
 0d 000 00  1    0    0   0   0    0    0    00
 0e 0FF 0F  1    0    0   0   0    1    1    99
 0f 0FF 0F  1    0    0   0   0    1    1    A1
 10 0FF 0F  1    1    0   1   0    1    1    A9
 11 000 00  1    0    0   0   0    0    0    00
 12 0FF 0F  1    1    0   1   0    1    1    B1
 13 0FF 0F  1    1    0   1   0    1    1    B9
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0-> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ12 -> 12
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ18 -> 18
IRQ19 -> 19
.................................... done.
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xf0d20
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I4,P3) -> 18
PCI->APIC IRQ transform: (B0,I4,P3) -> 18
PCI->APIC IRQ transform: (B0,I9,P0) -> 19
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro chipset
agpgart: AGP aperture is 32M @ 0xfc000000
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Starting kswapd v 1.5 
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide0: VIA Bus-Master (U)DMA Timing Config Success
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: IC35L040AVER07-0, ATA DISK drive
hdc: CD-540E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IC35L040AVER07-0, 39266MB w/1916kB Cache, CHS=5005/255/63
hdc: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eepro100.c:v1.09j-t 9/29/99 Donald Becker \
                http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin \
                <saw@saw.sw.com.sg> and others
eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15
eth0: Intel PCI EtherExpress Pro100 82557, 00:02:B3:48:BD:FC, IRQ 19.
  Board assembly 721383-017, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
eepro100.c:v1.09j-t 9/29/99 Donald Becker \
                http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin \
                <saw@saw.sw.com.sg> and others
eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 56k freed
Adding Swap: 979956k swap-space (priority -1)


-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic