[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: boot.msg
From: Terry Olson <TerryOlson () usinternet ! com>
Date: 2001-12-13 4:00:13
[Download RAW message or body]
Inspecting /boot/System.map-2.4.10-4GB
Loaded 11709 symbols from /boot/System.map-2.4.10-4GB.
Symbols match kernel version 2.4.10.
Loaded 23 symbols from 3 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3
20010315 (SuSE)) #1 Fri Sep 28 17:20:21 GMT 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000ee000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
<4> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<4>found SMP MP-table at 000fadf0
<4>hm, page 000fa000 reserved twice.
<4>hm, page 000fb000 reserved twice.
<4>hm, page 000f5000 reserved twice.
<4>hm, page 000f6000 reserved twice.
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<4>Intel MultiProcessor Specification v1.1
<4> Virtual Wire compatibility mode.
<4>OEM ID: VIA Product ID: KT133 APIC at: 0xFEE00000
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Processors: 1
<4>Kernel command line: auto BOOT_IMAGE=linux ro root=302
BOOT_FILE=/boot/vmlinuz enableapic vga=0x0317 hdd=ide-scsi
<4>ide_setup: hdd=ide-scsi
<6>Initializing CPU#0
<4>Detected 1000.075 MHz processor.
<4>Console: colour VGA+ 80x50
<4>Calibrating delay loop... 1992.29 BogoMIPS
<4>Memory: 512996k/524224k available (1289k kernel code, 10840k
reserved, 381k data, 124k init, 0k highmem)
<4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<7>CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
<7>CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
<7>CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
<4>CPU: AMD Athlon(tm) Processor stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000080
<4>ESR value after enabling vector: 00000000
<4>ENABLING IO-APIC IRQs
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
2-23 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 16.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178011
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0011
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 001 01 1 1 0 1 0 1 1 71
<7> 0a 001 01 1 1 0 1 0 1 1 79
<7> 0b 001 01 1 1 0 1 0 1 1 81
<7> 0c 001 01 0 0 0 0 0 1 1 89
<7> 0d 001 01 0 0 0 0 0 1 1 91
<7> 0e 001 01 0 0 0 0 0 1 1 99
<7> 0f 001 01 0 0 0 0 0 1 1 A1
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1000.0682 MHz.
<4>..... host bus clock speed is 200.0136 MHz.
<4>cpu: 0, clocks: 2000136, slice: 1000068
<4>CPU0<T0:2000128,T1:1000048,D:12,S:1000068,C:2000136>
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>PCI: Using IRQ router VIA [1106/0686] at 00:07.0
<6>Applying VIA southbridge workaround.
<6>PCI: Enabling Via external APIC routing
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
<4>Starting kswapd
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS
MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<4>block: 128 slots per queue, batch=16
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024
blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 39
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
<4> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: WDC WD400BB-00AUA1, ATA DISK drive
<4>hdb: IOMEGA ZIP 100 ATAPI Floppy, ATAPI FLOPPY drive
<4>hdc: ATAPI DVD-ROM 16X Maximum, ATAPI CD/DVD-ROM drive
<4>hdd: CREATIVE CD-RW RW1210E, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63,
UDMA(100)
<4>hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.12
<4>ide-floppy driver 0.97.sv
<3>hdb: No disk in drive
<6>hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
<6>Partition check:
<6> hda: hda1 hda2 hda3 hda4
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 8 devices)
<4>ide-floppy driver 0.97.sv
<6>SCSI subsystem driver Revision: 1.00
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<4>md: autorun ...
<4>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP: Hash tables configured (established 32768 bind 32768)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing................................................done.
<4>Freeing initrd memory: 476k freed
<4>VFS: Mounted root (ext2 filesystem).
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: CREATIVE Model: CD-RW RW1210E Rev: LCS6
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
<4>sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>change_root: old root has d_count=2
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 124k freed
<6>Adding Swap: 24088k swap-space (priority 42)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Dec 12 16:45:14
2001
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.24a (02-Sep-2001)
/dev/hda2: clean, 214950/2626560 files, 1276912/5242880 blocks
doneSetting up /lib/modules/2.4.10-4GBdone
Mounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
mount: you didn't specify a filesystem type for /dev/hda4
I will try type vfat
/dev/hda4 on /mnt/C type vfat (rw)
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockdone
Setting up timezone datadone
Setting up loopback devicedone
Setting up hostnamedone
Mount SHM FS on /dev/shmdone
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRunning /etc/init.d/boot.local
Using /lib/modules/2.4.10-4GB/kernel/drivers/input/joydev.o
/lib/modules/2.4.10-4GB/kernel/drivers/input/joydev.o: unresolved symbol
input_close_device
/lib/modules/2.4.10-4GB/kernel/drivers/input/joydev.o: unresolved symbol
input_register_minor
/lib/modules/2.4.10-4GB/kernel/drivers/input/joydev.o: unresolved symbol
input_unregister_minor
/lib/modules/2.4.10-4GB/kernel/drivers/input/joydev.o: unresolved symbol
input_open_device
/lib/modules/2.4.10-4GB/kernel/drivers/input/joydev.o: unresolved symbol
input_register_handler
/lib/modules/2.4.10-4GB/kernel/drivers/input/joydev.o: unresolved symbol
input_unregister_handler
failedCreating /var/log/boot.msg
done<notice>killproc: kill(25,29)
Enabling syn flood protectiondone
Disabling IP forwardingdone
<notice>killproc: kill(25,3)
INIT: Entering runlevel: 3
Boot logging started on /dev/tty1(/dev/console) at Wed Dec 12 22:45:28
2001
Master Resource Control: previous runlevel: N, switching to runlevel: 3
<notice>/etc/init.d/rc3.d/S01SuSEfirewall_init start
<notice>'/etc/init.d/rc3.d/S01SuSEfirewall_init start' exits with status
0
<notice>/etc/init.d/rc3.d/S01dummy start
<notice>'/etc/init.d/rc3.d/S01dummy start' exits with status 0
<notice>/etc/init.d/rc3.d/S01i4l_hardware start
<notice>'/etc/init.d/rc3.d/S01i4l_hardware start' exits with status 0
<notice>/etc/init.d/rc3.d/S01personal-firewall.initial start
Starting personal-firewall (initial) [not active]unused
<notice>'/etc/init.d/rc3.d/S01personal-firewall.initial start' exits
with status 6
<notice>/etc/init.d/rc3.d/S01random start
Initializing random number generatordone
<notice>'/etc/init.d/rc3.d/S01random start' exits with status 0
<notice>/etc/init.d/rc3.d/S02dhclient start
<notice>'/etc/init.d/rc3.d/S02dhclient start' exits with status 0
<notice>/etc/init.d/rc3.d/S02i4l start
<notice>'/etc/init.d/rc3.d/S02i4l start' exits with status 0
<notice>/etc/init.d/rc3.d/S05network start
<notice>'/etc/init.d/rc3.d/S05network start' exits with status 0
<notice>/etc/init.d/rc3.d/S06hotplug start
Starting hotplugging services [ usb ]done
<notice>'/etc/init.d/rc3.d/S06hotplug start' exits with status 0
<notice>/etc/init.d/rc3.d/S06zebra start
<notice>'/etc/init.d/rc3.d/S06zebra start' exits with status 0
<notice>/etc/init.d/rc3.d/S07bgpd start
<notice>'/etc/init.d/rc3.d/S07bgpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S07ospf6d start
<notice>'/etc/init.d/rc3.d/S07ospf6d start' exits with status 0
<notice>/etc/init.d/rc3.d/S07ospfd start
<notice>'/etc/init.d/rc3.d/S07ospfd start' exits with status 0
<notice>/etc/init.d/rc3.d/S07ripd start
<notice>'/etc/init.d/rc3.d/S07ripd start' exits with status 0
<notice>/etc/init.d/rc3.d/S07ripngd start
<notice>'/etc/init.d/rc3.d/S07ripngd start' exits with status 0
<notice>/etc/init.d/rc3.d/S07route start
<notice>'/etc/init.d/rc3.d/S07route start' exits with status 0
<notice>/etc/init.d/rc3.d/S08SuSEfirewall_setup start
<notice>'/etc/init.d/rc3.d/S08SuSEfirewall_setup start' exits with
status 0
<notice>/etc/init.d/rc3.d/S08ntopd start
<notice>'/etc/init.d/rc3.d/S08ntopd start' exits with status 0
<notice>/etc/init.d/rc3.d/S08snmpd start
<notice>'/etc/init.d/rc3.d/S08snmpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S08sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [
/usr/sbin/sshd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=tao
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES
MACHTYPE=i386-suse-linux LINES=50 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux
SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc3.d/S08sshd start' exits with status 0
<notice>/etc/init.d/rc3.d/S08syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [
/sbin/syslogd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=tao
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES
MACHTYPE=i386-suse-linux LINES=50 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux
SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=tao CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=50 SHLVL=2
COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>'/etc/init.d/rc3.d/S08syslog start' exits with status 0
<notice>/etc/init.d/rc3.d/S09junkbuster start
<notice>'/etc/init.d/rc3.d/S09junkbuster start' exits with status 0
<notice>/etc/init.d/rc3.d/S09portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [
/sbin/portmap ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=tao
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES
MACHTYPE=i386-suse-linux LINES=50 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux
SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc3.d/S09portmap start' exits with status 0
<notice>/etc/init.d/rc3.d/S09splash_early start
<notice>'/etc/init.d/rc3.d/S09splash_early start' exits with status 0
<notice>/etc/init.d/rc3.d/S10nfs start
<notice>'/etc/init.d/rc3.d/S10nfs start' exits with status 0
<notice>/etc/init.d/rc3.d/S10ypserv start
<notice>'/etc/init.d/rc3.d/S10ypserv start' exits with status 0
<notice>/etc/init.d/rc3.d/S11apmd start
<notice>'/etc/init.d/rc3.d/S11apmd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11at start
Starting service at daemon:<notice>startproc: execve (/usr/sbin/atd) [
/usr/sbin/atd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=tao
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES
MACHTYPE=i386-suse-linux LINES=50 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux
SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
<notice>'/etc/init.d/rc3.d/S11at start' exits with status 0
<notice>/etc/init.d/rc3.d/S11fbset start
<notice>'/etc/init.d/rc3.d/S11fbset start' exits with status 0
<notice>/etc/init.d/rc3.d/S11identd start
Starting identd<notice>startproc: execve (/usr/sbin/in.identd) [
/usr/sbin/in.identd -e ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=tao
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES
MACHTYPE=i386-suse-linux LINES=50 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux
SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/in.identd ]
done
<notice>'/etc/init.d/rc3.d/S11identd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11ipxrip start
<notice>'/etc/init.d/rc3.d/S11ipxrip start' exits with status 0
<notice>/etc/init.d/rc3.d/S11kbd start
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
<notice>'/etc/init.d/rc3.d/S11kbd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11lpd start
Starting lpd<notice>startproc: execve (/usr/sbin/lpd) [ /usr/sbin/lpd ],
[ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=tao CONSOLE=/dev/console
vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=50
SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386
OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin
RUNLEVEL=3 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc
DAEMON=/usr/sbin/lpd ]
done
<notice>'/etc/init.d/rc3.d/S11lpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11mysql start
<notice>'/etc/init.d/rc3.d/S11mysql start' exits with status 0
<notice>/etc/init.d/rc3.d/S11named start
<notice>'/etc/init.d/rc3.d/S11named start' exits with status 0
<notice>/etc/init.d/rc3.d/S11nwe start
<notice>'/etc/init.d/rc3.d/S11nwe start' exits with status 0
<notice>/etc/init.d/rc3.d/S11quota start
<notice>'/etc/init.d/rc3.d/S11quota start' exits with status 0
<notice>/etc/init.d/rc3.d/S11radiusd start
<notice>'/etc/init.d/rc3.d/S11radiusd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11raw start
<notice>'/etc/init.d/rc3.d/S11raw start' exits with status 0
<notice>/etc/init.d/rc3.d/S11rcyiff start
<notice>'/etc/init.d/rc3.d/S11rcyiff start' exits with status 0
<notice>/etc/init.d/rc3.d/S11rinetd start
<notice>'/etc/init.d/rc3.d/S11rinetd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11rstatd start
<notice>'/etc/init.d/rc3.d/S11rstatd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11rsyncd start
<notice>'/etc/init.d/rc3.d/S11rsyncd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11sane start
<notice>'/etc/init.d/rc3.d/S11sane start' exits with status 0
<notice>/etc/init.d/rc3.d/S11sendmail start
<notice>'/etc/init.d/rc3.d/S11sendmail start' exits with status 0
<notice>/etc/init.d/rc3.d/S11smb start
<notice>'/etc/init.d/rc3.d/S11smb start' exits with status 0
<notice>/etc/init.d/rc3.d/S11smpppd start
Starting SMPPPD<notice>startproc: execve (/usr/sbin/smpppd) [
/usr/sbin/smpppd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=tao
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES
MACHTYPE=i386-suse-linux LINES=50 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux
SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
done
<notice>'/etc/init.d/rc3.d/S11smpppd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11ypbind start
<notice>'/etc/init.d/rc3.d/S11ypbind start' exits with status 0
<notice>/etc/init.d/rc3.d/S11yppasswdd start
<notice>'/etc/init.d/rc3.d/S11yppasswdd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11ypxfrd start
<notice>'/etc/init.d/rc3.d/S11ypxfrd start' exits with status 0
<notice>/etc/init.d/rc3.d/S12autofs start
<notice>'/etc/init.d/rc3.d/S12autofs start' exits with status 0
<notice>/etc/init.d/rc3.d/S12dhcpd start
<notice>'/etc/init.d/rc3.d/S12dhcpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S12inn start
<notice>'/etc/init.d/rc3.d/S12inn start' exits with status 0
<notice>/etc/init.d/rc3.d/S12nfsserver start
<notice>'/etc/init.d/rc3.d/S12nfsserver start' exits with status 0
<notice>/etc/init.d/rc3.d/S12proftpd start
<notice>'/etc/init.d/rc3.d/S12proftpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S12quotad start
<notice>'/etc/init.d/rc3.d/S12quotad start' exits with status 0
<notice>/etc/init.d/rc3.d/S12smbfs start
<notice>'/etc/init.d/rc3.d/S12smbfs start' exits with status 0
<notice>/etc/init.d/rc3.d/S12wwwoffle start
<notice>'/etc/init.d/rc3.d/S12wwwoffle start' exits with status 0
<notice>/etc/init.d/rc3.d/S12xfs start
<notice>'/etc/init.d/rc3.d/S12xfs start' exits with status 0
<notice>/etc/init.d/rc3.d/S12xntpd start
<notice>'/etc/init.d/rc3.d/S12xntpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S13cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [
/usr/sbin/cron ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=tao
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES
MACHTYPE=i386-suse-linux LINES=50 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux
SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>'/etc/init.d/rc3.d/S13cron start' exits with status 0
<notice>/etc/init.d/rc3.d/S13fam start
<notice>'/etc/init.d/rc3.d/S13fam start' exits with status 0
<notice>/etc/init.d/rc3.d/S13ksysguardd start
<notice>'/etc/init.d/rc3.d/S13ksysguardd start' exits with status 0
<notice>/etc/init.d/rc3.d/S13lisa start
Starting lan browser daemon for KDE<notice>startproc: execve
(/usr/sbin/lisa) [ /usr/sbin/lisa -c /etc/lisarc ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=tao CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=50 SHLVL=2
COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/lisa ]
done
<notice>'/etc/init.d/rc3.d/S13lisa start' exits with status 0
<notice>/etc/init.d/rc3.d/S13nscd start
Starting Name Service Cache Daemon<notice>startproc: execve
(/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz
HOSTNAME=tao CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES
MACHTYPE=i386-suse-linux LINES=50 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux
SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc3.d/S13nscd start' exits with status 0
<notice>/etc/init.d/rc3.d/S20gpm start
Starting console mouse support (gpm): <notice>startproc: execve
(/usr/sbin/gpm) [ /usr/sbin/gpm -t imps2 -m /dev/mouse ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=tao CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=50 SHLVL=2
COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/gpm ]
done
<notice>'/etc/init.d/rc3.d/S20gpm start' exits with status 0
<notice>/etc/init.d/rc3.d/S20inetd start
<notice>'/etc/init.d/rc3.d/S20inetd start' exits with status 0
<notice>/etc/init.d/rc3.d/S21alsasound start
Starting sound driver: emu10k1done
Restoring the previous sound settingdone
<notice>'/etc/init.d/rc3.d/S21alsasound start' exits with status 0
<notice>/etc/init.d/rc3.d/S21apache start
Starting httpd [ PERL PHP4 Python ]<notice>startproc: execve
(/usr/sbin/httpd) [ /usr/sbin/httpd -f /etc/httpd/httpd.conf ], [ PWD=/
DBROOT=/dev/null BOOT_FILE=/boot/vmlinuz HOSTNAME=tao
CONSOLE=/dev/console LD_LIBRARY_PATH=:/lib vga=0x0317 PREVLEVEL=N
AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=50 ORACLE_HOME= SHLVL=2
COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/httpd ]
done
<notice>'/etc/init.d/rc3.d/S21apache start' exits with status 0
<notice>/etc/init.d/rc3.d/S21atalk start
<notice>'/etc/init.d/rc3.d/S21atalk start' exits with status 0
<notice>/etc/init.d/rc3.d/S21ircd start
<notice>'/etc/init.d/rc3.d/S21ircd start' exits with status 0
<notice>/etc/init.d/rc3.d/S22splash_late start
<notice>'/etc/init.d/rc3.d/S22splash_late start' exits with status 0
<notice>/etc/init.d/rc3.d/S22squid start
<notice>'/etc/init.d/rc3.d/S22squid start' exits with status 0
<notice>/etc/init.d/rc3.d/S23SuSEfirewall_final start
<notice>'/etc/init.d/rc3.d/S23SuSEfirewall_final start' exits with
status 0
<notice>/etc/init.d/rc3.d/S24personal-firewall.final start
Starting personal-firewall (final) [not active]unused
<notice>'/etc/init.d/rc3.d/S24personal-firewall.final start' exits with
status 6
Master Resource Control: runlevel 3 has been reached
Skipped services in runlevel 3: personal-firewall.initial
personal-firewall.final
<notice>killproc: kill(123,3)
-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic