[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-sh
Subject: Re: [PATCH v2 2/2] v4l: vsp1: Always enable virtual RPF when BRU is in use
From: Takanari Hayama <taki () igel ! co ! jp>
Date: 2014-11-27 23:37:17
Message-ID: 5477B5AD.20509 () igel ! co ! jp
[Download RAW message or body]
Hi Laurent,
On 11/28/14, 5:03 AM, Laurent Pinchart wrote:
> Hi Hayama-san,
>
> Thank you for the patch.
>
> On Thursday 27 November 2014 10:25:02 Takanari Hayama wrote:
>> Regardless of a number of inputs, we should always enable virtual RPF
>> when BRU is used. This allows the case when there's only one input to
>> BRU, and a size of the input is smaller than a size of an output of BRU.
>>
>> Signed-off-by: Takanari Hayama <taki@igel.co.jp>
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> I've applied the patch to my tree. I'll wait for your reply regarding my
> comments to the first patch and will then send a pull request for both.
Thank you. As I already mentioned in my other email, I'm all good with
your suggestions.
>> ---
>> drivers/media/platform/vsp1/vsp1_wpf.c | 11 ++++++-----
>> 1 file changed, 6 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c
>> b/drivers/media/platform/vsp1/vsp1_wpf.c index 6e05776..cb17c4d 100644
>> --- a/drivers/media/platform/vsp1/vsp1_wpf.c
>> +++ b/drivers/media/platform/vsp1/vsp1_wpf.c
>> @@ -92,19 +92,20 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int
>> enable) return 0;
>> }
>>
>> - /* Sources. If the pipeline has a single input configure it as the
>> - * master layer. Otherwise configure all inputs as sub-layers and
>> - * select the virtual RPF as the master layer.
>> + /* Sources. If the pipeline has a single input and BRU is not used,
>> + * configure it as the master layer. Otherwise configure all
>> + * inputs as sub-layers and select the virtual RPF as the master
>> + * layer.
>> */
>> for (i = 0; i < pipe->num_inputs; ++i) {
>> struct vsp1_rwpf *input = pipe->inputs[i];
>>
>> - srcrpf |= pipe->num_inputs == 1
>> + srcrpf |= (!pipe->bru && pipe->num_inputs == 1)
>> ? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index)
>>
>> : VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index);
>>
>> }
>>
>> - if (pipe->num_inputs > 1)
>> + if (pipe->bru || pipe->num_inputs > 1)
>> srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST;
>>
>> vsp1_wpf_write(wpf, VI6_WPF_SRCRPF, srcrpf);
>
Cheers,
Takanari Hayama, Ph.D. (taki@igel.co.jp)
IGEL Co.,Ltd.
http://www.igel.co.jp/
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic