[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-sh
Subject: [PATCH 03/03] ARM: mach-shmobile: sh7372 power domain LED hack
From: Magnus Damm <magnus.damm () gmail ! com>
Date: 2011-06-30 9:47:18
Message-ID: 20110630094718.10442.53311.sendpatchset () t400s
[Download RAW message or body]
From: Magnus Damm <damm@opensource.se>
Hack to hook up LED1->LED4 on the Mackerel board
to show the state of the power domains:
LED1: ARM core
LED2: A4LC
LED3: A3RV
LED4: A3SP
Not-yet-signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/pm-sh7372.c | 49 ++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
--- 0005/arch/arm/mach-shmobile/pm-sh7372.c
+++ work/arch/arm/mach-shmobile/pm-sh7372.c 2011-06-30 17:06:38.000000000 +0900
@@ -18,6 +18,7 @@
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
@@ -43,6 +44,19 @@ static int pd_power_down(struct generic_
struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
unsigned int mask = 1 << sh7372_pd->bit_shift;
+#ifndef CONFIG_LEDS_GPIO
+ /* LED2: A4LC status - LED off when power off */
+ if (genpd == &sh7372_a4lc.genpd)
+ gpio_set_value(GPIO_PORT1, 0);
+
+ /* LED3: A3RV status - LED off when power off */
+ if (genpd == &sh7372_a3rv.genpd)
+ gpio_set_value(GPIO_PORT2, 0);
+
+ /* LED4: A3SP status - LED off when power off */
+ if (genpd == &sh7372_a3sp.genpd)
+ gpio_set_value(GPIO_PORT159, 0);
+#endif
if (__raw_readl(PSTR) & mask) {
unsigned int retry_count;
@@ -70,6 +84,19 @@ static int pd_power_up(struct generic_pm
unsigned int retry_count;
int ret = 0;
+#ifndef CONFIG_LEDS_GPIO
+ /* LED2: A4LC status - LED lit when power on */
+ if (genpd == &sh7372_a4lc.genpd)
+ gpio_set_value(GPIO_PORT1, 1);
+
+ /* LED3: A3RV status - LED lit when power on */
+ if (genpd == &sh7372_a3rv.genpd)
+ gpio_set_value(GPIO_PORT2, 1);
+
+ /* LED4: A3SP status - LED lit when power on */
+ if (genpd == &sh7372_a3sp.genpd)
+ gpio_set_value(GPIO_PORT159, 1);
+#endif
if (__raw_readl(PSTR) & mask)
goto out;
@@ -145,6 +172,11 @@ static void sh7372_enter_core_standby(vo
{
void __iomem *smfram = (void __iomem *)SMFRAM;
+#ifndef CONFIG_LEDS_GPIO
+ /* LED1: ARM core status - LED off when power off */
+ gpio_set_value(GPIO_PORT0, 0);
+#endif
+
__raw_writel(0, APARMBAREA); /* translate 4k */
__raw_writel(__pa(sh7372_cpu_resume), SBAR); /* set reset vector */
__raw_writel(0x10, SYSTBCR); /* enable core standby */
@@ -165,6 +197,11 @@ static void sh7372_enter_core_standby(vo
__raw_writel(0, SYSTBCR); /* disable core standby */
__raw_writel(0, SBAR); /* disable reset vector translation */
+
+#ifndef CONFIG_LEDS_GPIO
+ /* LED1: ARM core status - LED lit when power on */
+ gpio_set_value(GPIO_PORT0, 1);
+#endif
}
#ifdef CONFIG_CPU_IDLE
@@ -222,6 +259,18 @@ void __init sh7372_pm_init(void)
/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
__raw_writel(0, PDNSEL);
+#ifndef CONFIG_LEDS_GPIO
+ /* output power domain state of LED1 -> LED4 */
+ gpio_request(GPIO_PORT0, NULL); /* LED1 */
+ gpio_direction_output(GPIO_PORT0, 1);
+ gpio_request(GPIO_PORT1, NULL); /* LED2 */
+ gpio_direction_output(GPIO_PORT1, 1);
+ gpio_request(GPIO_PORT2, NULL); /* LED3 */
+ gpio_direction_output(GPIO_PORT2, 1);
+ gpio_request(GPIO_PORT159, NULL); /* LED4 */
+ gpio_direction_output(GPIO_PORT159, 1);
+#endif
+
sh7372_suspend_init();
sh7372_cpuidle_init();
}
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic