[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-serial
Subject:    [PATCH 2/2] 8250: add a UPIO_DWAPB32 for 32 bit accesses
From:       Jamie Iles <jamie () jamieiles ! com>
Date:       2010-12-01 23:39:36
Message-ID: 1291246776-805-2-git-send-email-jamie () jamieiles ! com
[Download RAW message or body]

Some platforms contain a Synopsys DesignWare APB UART that is attached
to a 32-bit APB bus where sub-word accesses are not allowed. Add a new
IO type (UPIO_DWAPB32) that performs 32 bit acccesses to the UART.

v2:
	- don't test for 32 bit in the output fast path, provide a
	  separate dwabp32_serial_out() function. Refactor
	  dwabp_serial_out() so that we can reuse the LCR saving
	  code.
v3:
	- rebased on top of "8250: use container_of() instead of
	  casting"

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
---
 drivers/serial/8250.c        |   51 ++++++++++++++++++++++++++++++++----------
 drivers/serial/serial_core.c |    2 +
 include/linux/serial_core.h  |    1 +
 3 files changed, 42 insertions(+), 12 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0b4ce47..9839199 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -454,22 +454,40 @@ static void tsi_serial_out(struct uart_port *p, int offset, int value)
 		writeb(value, p->membase + offset);
 }
 
+/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
+static inline void dwapb_save_out_value(struct uart_port *p, int offset,
+					int value)
+{
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
+
+	if (offset == UART_LCR)
+		up->lcr = value;
+}
+
+/* Read the IER to ensure any interrupt is cleared before returning from ISR. */
+static inline void dwapb_check_clear_ier(struct uart_port *p, int offset)
+{
+	if (offset == UART_TX || offset == UART_IER)
+		p->serial_in(p, UART_IER);
+}
+
 static void dwapb_serial_out(struct uart_port *p, int offset, int value)
 {
 	int save_offset = offset;
 	offset = map_8250_out_reg(p, offset) << p->regshift;
-	/* Save the LCR value so it can be re-written when a
-	 * Busy Detect interrupt occurs. */
-	if (save_offset == UART_LCR) {
-		struct uart_8250_port *up =
-			container_of(p, struct uart_8250_port, port);
-		up->lcr = value;
-	}
+	dwapb_save_out_value(p, save_offset, value);
 	writeb(value, p->membase + offset);
-	/* Read the IER to ensure any interrupt is cleared before
-	 * returning from ISR. */
-	if (save_offset == UART_TX || save_offset == UART_IER)
-		value = p->serial_in(p, UART_IER);
+	dwapb_check_clear_ier(p, save_offset);
+}
+
+static void dwapb32_serial_out(struct uart_port *p, int offset, int value)
+{
+	int save_offset = offset;
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	dwapb_save_out_value(p, save_offset, value);
+	writel(value, p->membase + offset);
+	dwapb_check_clear_ier(p, save_offset);
 }
 
 static unsigned int io_serial_in(struct uart_port *p, int offset)
@@ -520,6 +538,11 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = dwapb_serial_out;
 		break;
 
+	case UPIO_DWAPB32:
+		p->serial_in = mem32_serial_in;
+		p->serial_out = dwapb32_serial_out;
+		break;
+
 	default:
 		p->serial_in = io_serial_in;
 		p->serial_out = io_serial_out;
@@ -538,6 +561,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
 	case UPIO_MEM32:
 	case UPIO_AU:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		p->serial_out(p, offset, value);
 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
 		break;
@@ -1587,7 +1611,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 			handled = 1;
 
 			end = NULL;
-		} else if (up->port.iotype == UPIO_DWAPB &&
+		} else if ((up->port.iotype == UPIO_DWAPB ||
+			    up->port.iotype == UPIO_DWAPB32) &&
 			  (iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 			/* The DesignWare APB UART has an Busy Detect (0x07)
 			 * interrupt meaning an LCR write attempt occured while the
@@ -2492,6 +2517,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32:
 	case UPIO_MEM:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		if (!up->port.mapbase)
 			break;
 
@@ -2529,6 +2555,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32:
 	case UPIO_MEM:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		if (!up->port.mapbase)
 			break;
 
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 9ffa5be..143103b 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2134,6 +2134,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 	case UPIO_AU:
 	case UPIO_TSI:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		snprintf(address, sizeof(address),
 			 "MMIO 0x%llx", (unsigned long long)port->mapbase);
 		break;
@@ -2554,6 +2555,7 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
 	case UPIO_AU:
 	case UPIO_TSI:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		return (port1->mapbase == port2->mapbase);
 	}
 	return 0;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 212eb4c..8681e7c 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -311,6 +311,7 @@ struct uart_port {
 #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
 #define UPIO_DWAPB		(6)			/* DesignWare APB UART */
 #define UPIO_RM9000		(7)			/* RM9000 type IO */
+#define UPIO_DWAPB32		(8)			/* DesignWare APB UART (32 bit accesses) */
 
 	unsigned int		read_status_mask;	/* driver specific */
 	unsigned int		ignore_status_mask;	/* driver specific */
-- 
1.7.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]