[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-scsi
Subject: aic7xxx says: PCI error Interrupt at seqaddr = 0x8
From: Karl Ranseier <karlran1234 () yahoo ! com>
Date: 2002-04-15 16:28:16
[Download RAW message or body]
Hello,
I've a big problem with my SCSI/PCI setup:
When doing a:
>/sbin/modprobe aic7xxx
Apr 14 09:13:04 test kernel: SCSI subsystem driver Revision: 1.00
Apr 14 09:13:04 test kernel: PCI: Found IRQ 11 for device 00:0b.0
Apr 14 09:13:04 test kernel: PCI: Sharing IRQ 11 with 00:07.2
Apr 14 09:13:04 test kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI
SCSI HBA DRIVER, Rev 6.2.4
Apr 14 09:13:04 test kernel: <Adaptec 29160 Ultra160 SCSI
adapter>
Apr 14 09:13:04 test kernel: aic7892: Ultra160 Wide Channel
A, SCSI Id=7, 32/253 SCBs
Apr 14 09:13:04 test kernel:
Apr 14 09:13:04 test kernel: scsi0: PCI error Interrupt at seqaddr =
0x8
Apr 14 09:13:04 test kernel: scsi0: Data Parity Error Detected
during address or write data phase
Apr 14 09:13:04 test kernel: scsi0: PCI error Interrupt at seqaddr =
0x8
Apr 14 09:13:04 test kernel: scsi0: Data Parity Error Detected
during address or write data phase
Apr 14 09:13:04 test kernel: scsi0: PCI error Interrupt at seqaddr =
0x9
Apr 14 09:13:04 test kernel: scsi0: Data Parity Error Detected
during address or write data phase
Apr 14 09:13:05 test kernel: scsi0: PCI error Interrupt at seqaddr =
0x9
Apr 14 09:13:05 test kernel: scsi0: Data Parity Error Detected
during address or write data phase
Apr 14 09:13:05 test kernel: scsi0: PCI error Interrupt at seqaddr =
0x8
Has anyone seen this before?
The problem ONLY appears when I run my PC with a Davicom 100MBPS NIC.
The Davicom runs fine without the 29160!
>scanpci -v
pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x8086 device 0x7190
Intel 82443BX Host
STATUS 0xa210 COMMAND 0x0006
CLASS 0x06 0x00 0x00 REVISION 0x03
HEADER 0x00 LATENCY 0x40
pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x8086 device 0x7191
Intel 82443BX AGP
STATUS 0x0220 COMMAND 0x0107
CLASS 0x06 0x04 0x00 REVISION 0x03
HEADER 0x01 LATENCY 0x40
PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x40
IOBASE 0xc000 IOLIM 0xcfff SECSTATUS 0x02a0
NOPREFETCH_MEMBASE 0xfff00000 MEMLIM 0x000fffff
PREFETCH_MEMBASE 0xfff00000 MEMLIM 0x000fffff
FAST_B2B NO_SEC_BUS_RST NO_M_ABRT NO_VGA_EN NO_ISA_EN NO_PERR_EN
pci bus 0x0 cardnum 0x07 function 0x0000: vendor 0x8086 device 0x7110
Intel 82371AB PIIX4 ISA
STATUS 0x0280 COMMAND 0x000f
CLASS 0x06 0x01 0x00 REVISION 0x02
HEADER 0x80 LATENCY 0x00
pci bus 0x0 cardnum 0x07 function 0x0001: vendor 0x8086 device 0x7111
Intel 82371AB PIIX4 IDE
STATUS 0x0280 COMMAND 0x0005
CLASS 0x01 0x01 0x80 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE4 0x0000f001 addr 0x0000f000 I/O
BYTE_0 0x8000a307 BYTE_1 0x00 BYTE_2 0x806cc48 BYTE_3
0xffffffff
pci bus 0x0 cardnum 0x07 function 0x0002: vendor 0x8086 device 0x7112
Intel 82371AB PIIX4 USB
STATUS 0x0280 COMMAND 0x0005
CLASS 0x0c 0x03 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE4 0x0000e001 addr 0x0000e000 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE 0xff
pci bus 0x0 cardnum 0x07 function 0x0003: vendor 0x8086 device 0x7113
Intel 82371AB PIIX4 ACPI
STATUS 0x0280 COMMAND 0x0003
CLASS 0x06 0x80 0x00 REVISION 0x02
pci bus 0x0 cardnum 0x08 function 0x0000: vendor 0x1011 device 0x0024
Digital DC21152
STATUS 0x8290 COMMAND 0x0107
CLASS 0x06 0x04 0x00 REVISION 0x03
HEADER 0x01 LATENCY 0x40
PRIBUS 0x00 SECBUS 0x02 SUBBUS 0x02 SECLT 0x40
IOBASE 0xd100 IOLIM 0xdfff SECSTATUS 0x0280
NOPREFETCH_MEMBASE 0xe0000000 MEMLIM 0xe7ffffff
PREFETCH_MEMBASE 0xfff10000 MEMLIM 0x000fffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_PERR_EN
pci bus 0x0 cardnum 0x09 function 0x0000: vendor 0x1282 device 0x9102
Device unknown
CardVendor 0x3030 card 0x5032 (Card unknown)
STATUS 0x8210 COMMAND 0x0007
CLASS 0x02 0x00 0x00 REVISION 0x31
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0x0000e401 addr 0x0000e400 I/O
BASE1 0xee001000 addr 0xee001000 MEM
BASEROM 0xec000000 addr 0xec000000 not-decode-enabled
MAX_LAT 0x28 MIN_GNT 0x14 INT_PIN 0x01 INT_LINE 0x0a
pci bus 0x0 cardnum 0x0a function 0x0000: vendor 0x13f6 device 0x0111
Device unknown
CardVendor 0x13f6 card 0x0111 (Card unknown)
STATUS 0x0210 COMMAND 0x0005
CLASS 0x04 0x01 0x00 REVISION 0x10
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0x0000e801 addr 0x0000e800 I/O
MAX_LAT 0x18 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0b
pci bus 0x0 cardnum 0x0b function 0x0000: vendor 0x9005 device 0x0080
Adaptec Device unknown
CardVendor 0x9005 card 0xe2a0 (Adaptec, Card unknown)
STATUS 0x82b0 COMMAND 0x0007
CLASS 0x01 0x00 0x00 REVISION 0x02
BIST 0x80 HEADER 0x00 LATENCY 0x40 CACHE 0x08
BASE0 0x0000ec01 addr 0x0000ec00 I/O
BASE1 0xee000004 addr 0xee000000 MEM 64BIT
BASEROM 0xed000000 addr 0xed000000 not-decode-enabled
MAX_LAT 0x19 MIN_GNT 0x28 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x482 BYTE_1 0x00 BYTE_2 0x806e140 BYTE_3
0xffffffff
Kernel: 2.4.17
MoBo: GA-BXE (Intel BX)
CPU: Celeron300
Aha29160
Davicom9102
I already tried shuffeling the boards & IRQs - no luck :-((
Thanks for any tricks or hints,
Karl
PS: Please keep the Cc...
__________________________________________________________________
Gesendet von Yahoo! Mail - http://mail.yahoo.de
Sie brauchen mehr Speicher für Ihre E-Mails? - http://premiummail.yahoo.de
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic