[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-router
Subject: [LRP] dmz with 2 isp's how?
From: Suresh Kumar R <listuser () yahoo ! com>
Date: 2001-06-28 11:49:24
[Download RAW message or body]
Hello,
We are using LRP with eiger+extended scripts of materhorn ver 1.0 in our lrp box with \
3 NICs as shown below.
External Network (BAD) [via cisco router and rad modem ....]
|
|
eth0|
---------------
|203.200.144.163| Server Network (DMZ)
| |eth2
| |----------------------------------------------
| |203.200.144.169| | |
| | | | |
|192.168.100.250| | | |
--------------- -------- ------- -------
| eth1 | SMTP | | DNS | | WWW |
| -------- ------- -------
| 203.200.144.170 .... (public ips)
|
Internal Network (GOOD)
The above setup has been working fine for one year now and now we have one more isp \
with a different ip subnet altogetheri, coming to the same cisco router thru another \
wan card. The cisco router has only one ethernet interface which goes to the lrp box.
What we need is this: we cannot change the dmz or internal lan. The traffic should go \
thru either of these links as which one is relatively free.
What we tried: We added an alias for eth2 interface which shows up in the command "ip \
route show". But we fail to ping anywhere from the lrp box. Not even the router's new \
ip by the new isp.
We know the link is fine asi, if we bypass the firewall everything is OK.
Any suggestions on how I can survive?
With thanks,
Suresh
PS. Kindly sent a cc to suresh@ece.cet.ac.in
__________________________________________________
Suresh Kumar.R,
Dept of Electronics & Communication
College of Engineering, Trivandrum - 695 016, INDIA
Phone: (O) 91 471 595634, 515660
_______________________________________________
linux-router maillist - linux-router@linuxrouter.org
http://www.linuxrouter.org/mailman/listinfo/linux-router
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic