[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-rdma
Subject:    Re: [PATCH v3 04/10] RDMA/hfi1: Use RMW accessors for changing LNKCTL2
From:       Dean Luick <dean.luick () cornelisnetworks ! com>
Date:       2023-09-29 13:03:04
Message-ID: 99fab1eb-1092-4b7d-8b60-b03374883302 () cornelisnetworks ! com
[Download RAW message or body]

On 9/29/2023 6:57 AM, Ilpo Järvinen wrote:
> Don't assume that only the driver would be accessing LNKCTL2. In the
> case of upstream (parent), the driver does not even own the device it's
> changing the registers for.
>
> Use RMW capability accessors which do proper locking to avoid losing
> concurrent updates to the register value. This change is also useful as
> a cleanup.
>
> Suggested-by: Lukas Wunner <lukas@wunner.de>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> ---
>  drivers/infiniband/hw/hfi1/pcie.c | 30 ++++++++----------------------
>  1 file changed, 8 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
> index 08732e1ac966..4487a05bea04 100644
> --- a/drivers/infiniband/hw/hfi1/pcie.c
> +++ b/drivers/infiniband/hw/hfi1/pcie.c
> @@ -1212,14 +1212,11 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
>                   (u32)lnkctl2);
>       /* only write to parent if target is not as high as ours */
>       if ((lnkctl2 & PCI_EXP_LNKCTL2_TLS) < target_vector) {
> -             lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
> -             lnkctl2 |= target_vector;
> -             dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
> -                         (u32)lnkctl2);
> -             ret = pcie_capability_write_word(parent,
> -                                              PCI_EXP_LNKCTL2, lnkctl2);
> +             ret = pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL2,
> +                                                      PCI_EXP_LNKCTL2_TLS,
> +                                                      target_vector);
>               if (ret) {
> -                     dd_dev_err(dd, "Unable to write to PCI config\n");
> +                     dd_dev_err(dd, "Unable to change parent PCI target speed\n");
>                       return_error = 1;
>                       goto done;
>               }
> @@ -1228,22 +1225,11 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
>       }
>
>       dd_dev_info(dd, "%s: setting target link speed\n", __func__);
> -     ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2);
> +     ret = pcie_capability_clear_and_set_word(dd->pcidev, PCI_EXP_LNKCTL2,
> +                                              PCI_EXP_LNKCTL2_TLS,
> +                                              target_vector);
>       if (ret) {
> -             dd_dev_err(dd, "Unable to read from PCI config\n");
> -             return_error = 1;
> -             goto done;
> -     }
> -
> -     dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,
> -                 (u32)lnkctl2);
> -     lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
> -     lnkctl2 |= target_vector;
> -     dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
> -                 (u32)lnkctl2);
> -     ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2);
> -     if (ret) {
> -             dd_dev_err(dd, "Unable to write to PCI config\n");
> +             dd_dev_err(dd, "Unable to change device PCI target speed\n");
>               return_error = 1;
>               goto done;
>       }

Looks good.  Thank you for my suggested changes.

Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>

-Dean

External recipient
[prev in list] [next in list] [prev in thread] [next in thread]