[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-raid
Subject: Re: Unable to read superblock
From: Micah Anderson <micah () riseup ! net>
Date: 2002-07-23 21:01:37
[Download RAW message or body]
On Mon, 22 Jul 2002, Ross Vandegrift wrote:
> On Mon, Jul 22, 2002 at 04:45:03PM -0700, Micah Anderson wrote:
> > > I had lilo set for:
> > >
> > > boot=/dev/md0
> > > root=/dev/md5
> > > image=/boot/vmlinuz-2.2.20RAID
> > > label=RAID
> > > read-only
> > > alias=4
>
> Are you using the raid-extra-boot option? If you aren't you probably
> want to be - it'll allow the system to boot if one of the boot drives is
> dead.
Actually, I switched to grub, I wasn't aware of the raid-extra-boot
option, wonder if there is something similar in grub.
> This may sound dumb, but are you sure you didn't compile RAID1 as a
> module? If you did, you'll need to use an initrd to load the module
> before you mount root. Otherwise, you'll need to rebuild the kernel
> with the driver included in the kernel.
Yes, I did *not* build them as modules. Modules are too much of a
pain. :)
Micah
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic