[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-ppc
Subject:    Re: Ethernet woes...
From:       Ronald Robson <Ronald.Robson () aldevron ! com>
Date:       2000-01-20 13:49:59
[Download RAW message or body]


I forgot to mention something in my previous post.

Even if your default route mask were correct and your routing table looked like
that below. You would still have problems. This is because communiction to your
gateway would match first on the third line of your routing table. This line uses
eth0 which you said was broken.  You'll need to eliminate eth0 from the table
before your problems are resolved.

Ron


> Eth0 -- the broken internal ethernet, not connected to anything
> Eth1 -- the Asante card
>
> 255.255.240.0   -- Netmask
> 130.***.224.1   -- Gateway
> 130.***.24.1    -- Nameserver
> 130.***.226.231 -- eth0's old IP address
> 130.***.226.10  -- eth1's current IP address
>
> Destination     Gateway         Genmask         Flags   Metric  Ref  Use  Iface
> 130.***.226.10  *               255.255.255.255 UH      0       0    0    eth1
> 130.***.226.231 *               255.255.255.255 UH      0       0    0    eth0
> 130.***.224.0   *               255.255.240.0   U       0       0    0    eth0
> 130.***.224.0   *               255.255.240.0   U       0       0    0    eth1
> 127.0.0.0       *               255.0.0.0       U       0       0    0    lo
> default         130.215.224.1   0.0.0.0   UG      0       0    0    eth1
>


** Sent via the linuxppc-user mail list. See http://lists.linuxppc.org/

[prev in list] [next in list] [prev in thread] [next in thread]