[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-poweredge
Subject: [Linux-PowerEdge] Disc fw update missing discs (C2100 and some Rxxx)
From: Mark Dominik Buerkle <dominik.buerkle () gameforge ! com>
Date: 2015-09-25 11:29:46
Message-ID: 5605302A.6050402 () gameforge ! com
[Download RAW message or body]
[Attachment #2 (multipart/alternative)]
Hi everyone,
in a C2100 machine I witnessed the disc update failing while updating
disc fw, now "update_firmware --yes" only recognises the last disc on
the controller and says "No action necessary" - see below for details.
In another machine (don't remember which) I successfully made all
updates, among them two discs with firmware 3b04, then disc two of two
failed, was replaced by a similar disc with firmware 3b03, then ran the
update_firmware--yes again, only the 3b03 disc was displayed by
update_firmware--yes (no action necessary) -- but it should have
displayed the disc with the 3b04 firmware, too, which it didn't show up.
Any hints on this, anyone (except pulling the two discs nr. 9 and 10 out
and then running the update again)?
Kind regards,
mdbuerkle
[root@DellUpdate ~]# update_firmware --yes
Running system inventory...
Searching storage directory for available BIOS updates...
Checking BIOS - c99q3b22
Did not find a newer package to install that meets all installation
checks.
Checking LSI MegaRAID SAS 9260-8i Controller 0 Firmware - 12.12.0-0111
Did not find a newer package to install that meets all installation
checks.
Checking System BIOS for PowerEdge C2100 - C99Q3B22
Did not find a newer package to install that meets all installation
checks.
Checking HUC106060CSS600 Firmware - a360
Available: dell_dup_componentid_24948 - a440
Found Update: dell_dup_componentid_24948 - a440
Found firmware which needs to be updated.
Running updates...
\ Installing dell_dup_componentid_24948 - a440Installation failed for
package: dell_dup_componentid_24948 - a440
aborting update...
The error message from the low-level command was:
The operation was aborted because consistency check is running.
[root@DellUpdate ~]# update_firmware --yes
Running system inventory...
Searching storage directory for available BIOS updates...
Checking BIOS - c99q3b22
Did not find a newer package to install that meets all installation
checks.
Checking LSI MegaRAID SAS 9260-8i Controller 0 Firmware - 12.12.0-0111
Did not find a newer package to install that meets all installation
checks.
Checking System BIOS for PowerEdge C2100 - C99Q3B22
Did not find a newer package to install that meets all installation
checks.
Checking HUC106060CSS600 Firmware - a440
Available: dell_dup_componentid_24948 - a440
Did not find a newer package to install that meets all installation
checks.
This system does not appear to have any updates available.
No action necessary.
[root@DellUpdate ~]# reboot
[ Using MegaCli to destroy LD 1, offline drives 9 and 10 and the like,
nothing changed the message: ]
[root@DellUpdate ~]# update_firmware --yes
Running system inventory...
Searching storage directory for available BIOS updates...
Checking BIOS - c99q3b22
Did not find a newer package to install that meets all installation
checks.
Checking LSI MegaRAID SAS 9260-8i Controller 0 Firmware - 12.12.0-0111
Did not find a newer package to install that meets all installation
checks.
Checking System BIOS for PowerEdge C2100 - C99Q3B22
Did not find a newer package to install that meets all installation
checks.
Checking HUC106060CSS600 Firmware - a440
Available: dell_dup_componentid_24948 - a440
Did not find a newer package to install that meets all installation
checks.
This system does not appear to have any updates available.
No action necessary.
[root@DellUpdate ~]# dmesg | grep -e scsi4 -e 'scsi 4:'
[ 20.285613] megaraid_sas 0000:05:00.0: [scsi4]: FW supports<0> MSIX
vector,Online CPUs: <24>,Current MSIX <1>
[ 20.484250] scsi4 : LSI SAS based MegaRAID driver
[ 20.494785] scsi 4:0:8:0: Direct-Access HITACHI HUC106060CSS600
A360 PQ: 0 ANSI: 6
[ 20.511367] scsi 4:0:9:0: Direct-Access HITACHI HUC106060CSS600
A360 PQ: 0 ANSI: 6
[ 20.527969] scsi 4:0:10:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6
[ 20.544727] scsi 4:0:11:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6
[ 20.561337] scsi 4:0:12:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6
[ 20.578015] scsi 4:0:13:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6
[ 20.594774] scsi 4:0:14:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6
[ 20.611551] scsi 4:0:15:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6
[ 20.628237] scsi 4:0:16:0: Direct-Access HITACHI
HUC106060CSS600 A440 PQ: 0 ANSI: 6
[ 20.644917] scsi 4:0:17:0: Direct-Access HITACHI
HUC106060CSS600 A440 PQ: 0 ANSI: 6
[ 20.673669] scsi 4:1:117:0: Enclosure DP
BACKPLANE 6A08 PQ: 0 ANSI: 5
[ 20.696633] scsi 4:1:117:0: Attached scsi generic sg0 type 13
[root@DellUpdate ~]#
--
*Mark Dominik Bürkle*
*Linux Systemadministrator*
------------------------------------------------------------------------
Gameforge 4D GmbH
Albert-Nestler-Straße 8
76131 Karlsruhe
Germany
*t* +49 721 - 354 808 207
*f* +49 721 - 354 808 152
*m* +49 152 - 5167 0918
*e* dominik.buerkle@gameforge.com <mailto:dominik.buerkle@gameforge.com>
corporate.gameforge.com <http://corporate.gameforge.com>
*Registered Office | Sitz der Gesellschaft* Karlsruhe
*Register Court | Registergericht* AG Mannheim, HRB 718029
*VAT ID | USt-IdNr.* DE 814330106
*Managing Directors | Geschäftsführer* Carsten van Husen, Tobias Haar
[Attachment #5 (text/html)]
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hi everyone,<br>
<br>
in a C2100 machine I witnessed the disc update failing while
updating disc fw, now "update_firmware --yes" only recognises the
last disc on the controller and says "No action necessary" - see
below for details.<br>
<br>
In another machine (don't remember which) I successfully made all
updates, among them two discs with firmware 3b04, then disc two of
two failed, was replaced by a similar disc with firmware 3b03, then
ran the update_firmware--yes again, only the 3b03 disc was displayed
by update_firmware--yes (no action necessary) -- but it should have
displayed the disc with the 3b04 firmware, too, which it didn't
show up.<br>
<br>
Any hints on this, anyone (except pulling the two discs nr. 9 and 10
out and then running the update again)?<br>
<br>
Kind regards,<br>
mdbuerkle<br>
<br>
<br>
<br>
[root@DellUpdate ~]# update_firmware --yes<br>
<br>
Running system inventory...<br>
<br>
Searching storage directory for available BIOS updates...<br>
Checking BIOS - c99q3b22<br>
Did not find a newer package to install that meets all
installation checks.<br>
Checking LSI MegaRAID SAS 9260-8i Controller 0 Firmware -
12.12.0-0111<br>
Did not find a newer package to install that meets all
installation checks.<br>
Checking System BIOS for PowerEdge C2100 - C99Q3B22<br>
Did not find a newer package to install that meets all
installation checks.<br>
Checking HUC106060CSS600 Firmware - a360<br>
Available: dell_dup_componentid_24948 - a440<br>
Found Update: dell_dup_componentid_24948 - a440<br>
<br>
Found firmware which needs to be updated.<br>
<br>
Running updates...<br>
\ Installing dell_dup_componentid_24948 - a440Installation failed
for package: dell_dup_componentid_24948 - a440<br>
aborting update...<br>
<br>
The error message from the low-level command was:<br>
<br>
The operation was aborted because consistency check is running.<br>
[root@DellUpdate ~]# update_firmware --yes<br>
Running system inventory...<br>
<br>
Searching storage directory for available BIOS updates...<br>
Checking BIOS - c99q3b22<br>
Did not find a newer package to install that meets all
installation checks.<br>
Checking LSI MegaRAID SAS 9260-8i Controller 0 Firmware -
12.12.0-0111<br>
Did not find a newer package to install that meets all
installation checks.<br>
Checking System BIOS for PowerEdge C2100 - C99Q3B22<br>
Did not find a newer package to install that meets all
installation checks.<br>
Checking HUC106060CSS600 Firmware - a440<br>
Available: dell_dup_componentid_24948 - a440<br>
Did not find a newer package to install that meets all
installation checks.<br>
<br>
This system does not appear to have any updates available.<br>
No action necessary.<br>
<br>
[root@DellUpdate ~]# reboot<br>
<br>
[ Using MegaCli to destroy LD 1, offline drives 9 and 10 and the
like, nothing changed the message: ]<br>
<br>
[root@DellUpdate ~]# update_firmware --yes<br>
<br>
Running system inventory...<br>
<br>
Searching storage directory for available BIOS updates...<br>
Checking BIOS - c99q3b22<br>
Did not find a newer package to install that meets all
installation checks.<br>
Checking LSI MegaRAID SAS 9260-8i Controller 0 Firmware -
12.12.0-0111<br>
Did not find a newer package to install that meets all
installation checks.<br>
Checking System BIOS for PowerEdge C2100 - C99Q3B22<br>
Did not find a newer package to install that meets all
installation checks.<br>
Checking HUC106060CSS600 Firmware - a440<br>
Available: dell_dup_componentid_24948 - a440<br>
Did not find a newer package to install that meets all
installation checks.<br>
<br>
This system does not appear to have any updates available.<br>
No action necessary.<br>
<br>
[root@DellUpdate ~]# dmesg | grep -e scsi4 -e 'scsi 4:'<br>
[ 20.285613] megaraid_sas 0000:05:00.0: [scsi4]: FW
supports<0> MSIX vector,Online CPUs: <24>,Current MSIX
<1><br>
[ 20.484250] scsi4 : LSI SAS based MegaRAID driver<br>
[ 20.494785] scsi 4:0:8:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6<br>
[ 20.511367] scsi 4:0:9:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6<br>
[ 20.527969] scsi 4:0:10:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6<br>
[ 20.544727] scsi 4:0:11:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6<br>
[ 20.561337] scsi 4:0:12:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6<br>
[ 20.578015] scsi 4:0:13:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6<br>
[ 20.594774] scsi 4:0:14:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6<br>
[ 20.611551] scsi 4:0:15:0: Direct-Access HITACHI
HUC106060CSS600 A360 PQ: 0 ANSI: 6<br>
[ 20.628237] scsi 4:0:16:0: Direct-Access HITACHI
HUC106060CSS600 A440 PQ: 0 ANSI: 6<br>
[ 20.644917] scsi 4:0:17:0: Direct-Access HITACHI
HUC106060CSS600 A440 PQ: 0 ANSI: 6<br>
[ 20.673669] scsi 4:1:117:0: Enclosure DP
BACKPLANE 6A08 PQ: 0 ANSI: 5<br>
[ 20.696633] scsi 4:1:117:0: Attached scsi generic sg0 type 13<br>
[root@DellUpdate ~]# <br>
<br>
<div class="moz-signature">-- <br>
<font size="2" face="Tahoma,Helvetica,Arial,sans-serif"> <b><font
color="#006ab3">Mark Dominik Bürkle</font></b> <br>
<b><font color="#727272">Linux Systemadministrator</font></b>
<hr> Gameforge 4D GmbH <br>
Albert-Nestler-Straße 8 <br>
76131 Karlsruhe <br>
Germany <br>
<br>
<font style="display:inline-block;width:1em" color="#727272"><b>t</b></font>
+49 721 - 354 808 207 <br>
<font style="display:inline-block;width:1em" color="#727272"><b>f</b></font>
+49 721 - 354 808 152 <br>
<font style="display:inline-block;width:1em" color="#727272"><b>m</b></font>
+49 152 - 5167 0918 <br>
<font style="display:inline-block;width:1em" color="#727272"><b>e</b></font>
<a href="mailto:dominik.buerkle@gameforge.com"><font
color="#006ab3">dominik.buerkle@gameforge.com</font></a> <br>
<br>
<a href="http://corporate.gameforge.com"><font color="#006ab3">corporate.gameforge.com</font></a>
<font color="#727272" size="1"> <br>
<br>
<b>Registered Office | Sitz der Gesellschaft</b> Karlsruhe <br>
<b>Register Court | Registergericht</b> AG Mannheim, HRB
718029 <br>
<b>VAT ID | USt-IdNr.</b> DE 814330106 <br>
<br>
<b>Managing Directors | Geschäftsführer</b> Carsten van Husen,
Tobias Haar </font>
</font>
</div>
</body>
</html>
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic