[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-poweredge
Subject:    Re: Mixing SAS and SATA drives
From:       Tony Molloy <tony.molloy () ul ! ie>
Date:       2008-03-04 16:57:02
Message-ID: 200803041657.02429.tony.molloy () ul ! ie
[Download RAW message or body]

On Tuesday 04 March 2008 16:35:33 Radim Hejc wrote:
> I was trying today to mix two 76GB SAS 15krpm Fujitsu drives and two
> 750GB Seagate SATA drives together
> (2x RAID1 both Dell Originals) on PE 2950, but after server reboot i'm
> still getting messages about Foreign configuration
> from PERC/6i controller, then one of SATA drives is always degraded.
> When i removed SAS everything seems to work fine
>
> strange thing, i will research more
>

That's interesting. That suggests that you can't mix them on the same 
controller even if they are separate RAID arrays. I'll be interested to hear 
what you come up with.

In the end I could always go with all SATA drives. It would be cheaper ;-)

Tony

> Radim Hejc(
> IT infrastructure
> U-TURN, a.s.
> Argentinská 38/286
> 17000 Praha 7, Czech rep.
>
> Tel.: +420.777190160
> ICQ: 11064792
>
> Tony Molloy napsal(a):
> > On Tuesday 04 March 2008 11:11:56 Mark Watts wrote:
> >> On Tuesday 04 March 2008 10:51:12 Tony Molloy wrote:
> >>> On Tuesday 04 March 2008 09:49:37 Hostmaster wrote:
> >>>>>>> Can't mix SATA and SAS disks. So we can't supply 2X73GB, SAS,
> >>>>>>> 3.5-inch, 15.000 rpm Hard Drive 4X750GB, SATA, 3.5-inch, 7200 rpm
> >>>>>>> Hard Drive. Instead I've configured 2X73GB, SAS, 3.5-inch, 15.000
> >>>>>>> rpm Hard Drive 4X400GB, SAS, 3.5-inch, 10,000 rpm Hard Drive.
> >>>>>
> >>>>> Can I do this and if I can how do I get Dell to supply me with that
> >>>>> configuration.
> >>>>
> >>>> AFAIK its *technically* possible to mix them, however it isn't a Dell
> >>>> supported configuration, therefore they won't sell them that way.
> >>>> Several of the guys from Enterprise Storage frequent these lists, so
> >>>> they will be able to give you the final word, but it might just be
> >>>> easier to buy the server with the supported config (ie just the two
> >>>> SAS drives for the OS), and then put a separate order for the four
> >>>> SATA drives, but check with someone who knows the PERC6/i better than
> >>>> me before buying!
> >>
> >> This question has been asked before.
> >
> > As I said in my mail I know it has been asked before but I'm just about
> > to spend 50,000+ euros on a rack so I wanted to be sure.
> >
> >> You can mix SATA/SAS disks on the same backplane, but the cannot be in
> >> the same logical volume.
> >
> > That was my impression of the previous thread so my RAID1/RAID5
> > configuration should work. The problem then is to get Dell to sell that
> > configuration to me.
> >
> > Thanks,
> >
> > Tony
> >
> >> http://lists.us.dell.com/pipermail/linux-poweredge/2008-February/035159.
> >>htm l
> >
> > _______________________________________________
> > Linux-PowerEdge mailing list
> > Linux-PowerEdge@dell.com
> > http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> > Please read the FAQ at http://lists.us.dell.com/faq



_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq

[prev in list] [next in list] [prev in thread] [next in thread]