[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-poweredge
Subject: RE: disabling raid on a 1950
From: <Patrick_Boyd () dell ! com>
Date: 2006-07-27 18:18:38
Message-ID: FCD01C3AA0ADFB498F9BB1A6173DFC5D93B109 () ausx3mpc120 ! aus ! amer ! dell ! com
[Download RAW message or body]
The 1950's are SAS. You can either order them with a PERC 5/I or a SAS
5/I. If you ordered them with the PERC 5/I then I'm afraid you are stuck
with RAID.
Patrick Boyd
Dell Storage Software Engineer
(512)728-3182
-----Original Message-----
From: linux-poweredge-bounces@dell.com
[mailto:linux-poweredge-bounces@dell.com] On Behalf Of Christopher
McCrory
Sent: Thursday, July 27, 2006 12:43 PM
To: linux-poweredge-Lists
Subject: disabling raid on a 1950
Hello...
We got a bunch of 1950s, and want to disable the PERC raid on a couple.
It seems that the 1950s are different than the 1850s. Is there an on
board plain scsi connector that I am just not seeing?
TIA
--
Christopher McCrory
"The^W One of the guys that keeps the servers running"
chrismcc@pricegrabber.com
http://www.pricegrabber.com
Let's face it, there's no Hollow Earth, no robots, and no 'mute rays.'
And even if there were, waxed paper is no defense. I tried it. Only
tinfoil works.
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic