[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-poweredge
Subject: Re: 39160 raid card w/ rh9 linux
From: Sean Dilda <agrajag () dragaera ! net>
Date: 2004-09-28 18:09:40
Message-ID: 1096394980.11878.31.camel () pel
[Download RAW message or body]
On Mon, 2004-09-27 at 20:11, Matthew Marlowe wrote:
> >>
> >> So, my obvious question now is: What application do I use to
> >> manage/create/monitor the health of my PV220S disks over my 39160 raid
> >> card? Is this the proper raid card to be using? The main reason I ask
> >> that is because it is described as a u160 card, while my drives in the
> >> pv220s are all u320. I am admittedly no scsi expert, so i have to wonder
> >> if we are going to see lower performance by using this card.
> >>
> >>
>
> The 39160 is _not_ a raid card. It is simply a wells supported U160 SCSI
> controller. If you need HW raid on a PE 1750, you're best bet is to get
> a Perc 4/Di controller. I believe those have excellent U320 raid5 or 4
> performance.
>
> I'm not that familiar with the PV220S - perhaps it has built in raid, I have no
> idea..
The PV220S does not have a built-in raid controller. Its a JBOD, but
can of course be hooked up to a hardware raid controller. The other
option is to use software raid under linux if you don't want to buy a
hardware raid controller.
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic