[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-pcmcia
Subject: unable to apply power with Kernel 2.6.11
From: Jerome Poggi <Jerome.Poggi () hsc ! fr>
Date: 2005-05-11 13:51:12
Message-ID: 20050511135112.GF11707 () efflam ! hsc ! fr
[Download RAW message or body]
An another plateform with this bug :
Type : IBM T42 with 1Go of RAM
cardbus bridge type : Yenta - Texas Instruments PCI4520
The full lspci -vv output is in attached piece
The Dmesg is in attached piece
the IOMEM and cbdump also
I get also the error :
cs: pcmcia_socket0: *** DANGER *** unable to remove socket power
Jerome.
["iomem.txt" (text/plain)]
00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000d0000-000d0fff : Adapter ROM
000d1000-000d1fff : Adapter ROM
000d2000-000d3fff : reserved
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ff2ffff : System RAM
00100000-0042f7e5 : Kernel code
0042f7e6-00581f3f : Kernel data
3ff30000-3ff41fff : ACPI Tables
3ff42000-3ff53fff : ACPI Non-volatile Storage
3ff80000-3fffffff : reserved
40000000-400003ff : 0000:00:1f.1
40400000-407fffff : PCI CardBus #03
40800000-40bfffff : PCI CardBus #03
40c00000-40ffffff : PCI CardBus #07
40c00000-40c1ffff : 0000:07:00.0
41000000-413fffff : PCI CardBus #07
41000000-4100007f : 0000:07:00.0
41000080-410000ff : 0000:07:00.0
b0000000-b0000fff : 0000:02:00.0
b0000000-b0000fff : yenta_socket
b1000000-b1000fff : 0000:02:00.1
b1000000-b1000fff : yenta_socket
c0000000-c00003ff : 0000:00:1d.7
c0000000-c00003ff : ehci_hcd
c0000800-c00008ff : 0000:00:1f.5
c0000800-c00008ff : Intel 82801DB-ICH4
c0000c00-c0000dff : 0000:00:1f.5
c0000c00-c0000dff : Intel 82801DB-ICH4
c0100000-c01fffff : PCI Bus #01
c0100000-c010ffff : 0000:01:00.0
c0100000-c010ffff : radeonfb
c0200000-c020ffff : 0000:02:01.0
c0200000-c020ffff : e1000
c0210000-c0210fff : 0000:02:02.0
c0210000-c0210fff : ipw2200
c0220000-c023ffff : 0000:02:01.0
c0220000-c023ffff : e1000
d0000000-dfffffff : 0000:00:00.0
e0000000-e7ffffff : PCI Bus #01
e0000000-e7ffffff : 0000:01:00.0
e0000000-e7ffffff : radeonfb
ff800000-ffffffff : reserved
["lspci_vv.txt" (text/plain)]
0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev \
03) Subsystem: IBM: Unknown device 0529
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ \
FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- \
<MAbort+ >SERR- <PERR- Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable)
Capabilities: [e4] #09 [4104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- \
Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev \
03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- \
VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- \
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: e0000000-e7ffffff
Expansion ROM at 00003000 [disabled] [size=4K]
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) \
USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM: Unknown device \
052d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1800 [size=32]
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) \
USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM: Unknown device \
052d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) \
USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM: Unknown device \
052d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI \
Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: IBM: Unknown device 052e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ \
FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2080]
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) (prog-if \
00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- \
ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- \
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0
Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
I/O behind bridge: 00004000-00008fff
Memory behind bridge: c0200000-cfffffff
Prefetchable memory behind bridge: e8000000-efffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge \
(rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- \
Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium \
>TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev \
01) (prog-if 8a [Master SecP PriP]) Subsystem: IBM: Unknown device 052d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- \
FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus \
Controller (rev 01) Subsystem: IBM: Unknown device 052d
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- \
FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1880 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM \
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) Subsystem: IBM: Unknown device \
0537 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 1c00
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 \
Modem Controller (rev 01) (prog-if 00 [Generic]) Subsystem: IBM: Unknown device 055a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- \
FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort- >SERR- <PERR- Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 2400
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW \
[Radeon Mobility 7500] (prog-if 00 [VGA]) Subsystem: IBM: Unknown device 0530
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ \
FastB2B+ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort- >SERR- <PERR- Latency: 66 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable)
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- \
Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller \
(rev 01) Subsystem: IBM: Unknown device 0552
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- \
FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort- >SERR- <PERR- Latency: 168, cache line size 10
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b0000000 (32-bit, non-prefetchable)
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 40400000-407ff000 (prefetchable)
Memory window 1: 40800000-40bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller \
(rev 01) Subsystem: IBM: Unknown device 0552
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- \
FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort- >SERR- <PERR- Latency: 168, cache line size 10
Interrupt: pin B routed to IRQ 11
Region 0: Memory at b1000000 (32-bit, non-prefetchable)
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 40c00000-40fff000 (prefetchable)
Memory window 1: 41000000-413ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
0000:02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet \
Controller (Mobile) (rev 03) Subsystem: IBM PRO/1000 MT Mobile Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ \
FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort- >SERR- <PERR- Latency: 64 (63750ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0220000 (32-bit, non-prefetchable)
Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at 8000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
Subsystem: Intel Corporation: Unknown device 2712
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ \
FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort- >SERR- <PERR- Latency: 64 (750ns min, 6000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0210000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:07:00.0 Ethernet controller: 3Com Corporation 3cCFE575BT Megahertz 10/100 LAN \
CardBus [Cyclone] (rev 01) Subsystem: 3Com Corporation 3C575 Megahertz 10/100 LAN \
Cardbus PC Card Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- \
Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium \
>TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 4800 [disabled] [size=1036M]
Region 1: Memory at 41000000 (32-bit, non-prefetchable) [disabled] [size=128]
Region 2: Memory at 41000080 (32-bit, non-prefetchable) [disabled] [size=128]
Expansion ROM at 00020000 [disabled]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Linux version 2.6.11 (root@efflam) (gcc version 3.4.3 20050110 (Gentoo Hardened Linux \
3.4.3.20050110, ssp-3.4.3.20050110-0, pie-8.7.7)) #2 Fri Mar 4 16:51:19 CET 2005 \
BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 \
(usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
BIOS-e820: 000000003ff30000 - 000000003ff42000 (ACPI data)
BIOS-e820: 000000003ff42000 - 000000003ff54000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 261936
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32560 pages, LIFO batch:7
DMI present.
ACPI: RSDP (v002 IBM ) @ 0x000f6df0
ACPI: XSDT (v001 IBM TP-1R 0x00003140 LTP 0x00000000) @ 0x3ff356cd
ACPI: FADT (v003 IBM TP-1R 0x00003140 IBM 0x00000001) @ 0x3ff35800
ACPI: SSDT (v001 IBM TP-1R 0x00003140 MSFT 0x0100000e) @ 0x3ff359b4
ACPI: ECDT (v001 IBM TP-1R 0x00003140 IBM 0x00000001) @ 0x3ff41ebc
ACPI: TCPA (v001 IBM TP-1R 0x00003140 PTL 0x00000001) @ 0x3ff41f0e
ACPI: BOOT (v001 IBM TP-1R 0x00003140 LTP 0x00000001) @ 0x3ff41fd8
ACPI: DSDT (v001 IBM TP-1R 0x00003140 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
Built 1 zonelists
Kernel command line: resume2=swap:/dev/hda3 root=/dev/hda5 acpi_sleep=s3_bios ro \
video=radeonfb:1024x768@60 noapic Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1594.841 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032992k/1047744k available (3261k kernel code, 14136k reserved, 1353k data, \
192k init, 130240k highmem) Checking if this processor honours the WP bit even in \
supervisor mode... Ok. Calibrating delay loop... 3162.11 BogoMIPS (lpj=1581056)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 \
00000000 00000000
CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 \
00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 \
00000000 Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0800)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Simple Boot Flag at 0x35 set to 0x1
highmem bounce pool size: 64 pages
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.22 [Flags: R/W].
Initializing Cryptographic API
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=260.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
Console: switching to colour frame buffer device 128x48
radeonfb: Dynamic Clock Power Management enabled
radeonfb: enabling sleep mode
radeonfb (0000:01:00.0): ATI Radeon LW
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (48 C)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
hw_random hardware driver 1.0.0 loaded
smapi::smapi_query_DSP_cfg: Error: Could not get DSP modem settings. Aborting.
mwave: tp3780i::tp3780I_CalcResources: Error: Could not query DSP config. Aborting.
mwave: mwavedd:mwave_init: Error: Failed to calculate resources
mwave: mwavedd::mwave_init: Error: Failed to initialize
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc Radeon \
Mobility M7 LW [Radeon Mobility 7500]
ACPI: PS/2 Keyboard Controller [KBD] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [MOU] at irq 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
pnp: Device 00:09 activated.
ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11
pnp: Device 00:0a activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ibmasm: IBM ASM Service Processor Driver version 0.4 loaded
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2040AH, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: UJDA755yDVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
st: Version 20041025, fixed bufsize 32768, s/g segs 256
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port at isa0060/serio1/input0
input: PS/2 Generic Mouse on synaptics-pt/serio0
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (8185 buckets, 65480 max) - 216 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. \
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
Software Suspend Core.
Software Suspend text mode support loaded.
Software Suspend LZF Compression Driver registered.
Software Suspend Swap Writer registered.
ACPI wakeup devices:
LID SLPB PCI0 UART PCI1 USB0 USB1 AC9M
ACPI: (supports S0 S3 S4 S5)
Looking for first block of swap header at block 0.
Setting logical block size of resume device to 4096.
Software Suspend 2.1.8: Sorry. No swap signature found at specified location.
Software Suspend 2.1.8: Not able to successfully parse this resume device. Suspending \
disabled. Software Suspend 2.1.8: Missing or invalid storage location (resume2= \
parameter). Please correct and rerun lilo (or equivalent) before suspending. \
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 192k freed
EXT3 FS on hda5, internal journal
loop: loaded (max 8 devices)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Non-volatile memory driver v1.2
ibm_acpi: IBM ThinkPad ACPI Extras v0.11
ibm_acpi: http://ibm-acpi.sf.net/
ibm_acpi: dock device not present
ieee80211_crypt: registered algorithm 'NULL'
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.3
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS volume version 3.1.
Adding 997912k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1
["cbdump.txt" (text/plain)]
02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller
-- generic cardbus config registers
Vendor ID [00] : 0x104c
Device ID [02] : 0xac46
PCI command [04] : 0x0007
Base address [10] : 0xb0000000
Memory Base 0 [1c] : 0x40400000
Memory Limit 0 [20] : 0x407ff000
Memory Base 1 [24] : 0x40800000
Memory Limit 1 [28] : 0x40bff000
IO Base 0 [2c] : 0x00004000
IO Limit 0 [30] : 0x000040fc
IO Base 1 [34] : 0x00004400
IO Limit 1 [38] : 0x000044fc
Bridge control [3e] : 0x05c0
Subsystem vendor ID [40] : 0x1014
Subsystem device ID [42] : 0x0552
Legacy mode base [44] : 0x0001
-- TI specific config registers
System control [80] : 0x0840d071
IRQ Mux [8c] : 0x01d21b22
Retry [90] : 0xc0
Card control [91] : 0x22
Device control [92] : 0x64
Diagnostic [93] : 0x41
-- cardbus registers
CB_SOCKET_EVENT [00] : 0x00000000
CB_SOCKET_MASK [04] : 0x00000006
CB_SOCKET_STATE [08] : 0x30000086
CB_SOCKET_FORCE [0c] : 0x00000000
CB_SOCKET_CONTROL [10] : 0x00000000
CB_SOCKET_POWER [20] : 0x00000000
-- exca registers
I365_IDENT [00] : 0x84
I365_STATUS [01] : 0x00
I365_POWER [02] : 0x00
I365_INTCTL [03] : 0x50
I365_CSC [04] : 0x00
I365_CSCINT [05] : 0x08
I365_ADDRWIN [06] : 0x00
I365_IOCTL [07] : 0x00
I365_GENCTL [16] : 0x00c0
I365_GBLCTL [1e] : 0x0000
I365_IO0_START [08] : 0x0000
I365_IO0_STOP [0a] : 0x0001
I365_IO1_START [0c] : 0x0000
I365_IO1_STOP [0e] : 0x0001
I365_MEM0_START [10] : 0x0000
I365_MEM0_STOP [12] : 0x0000
I365_MEM0_OFF [14] : 0x0000
I365_MEM0_PAGE [40] : 0x00
I365_MEM1_START [18] : 0x0000
I365_MEM1_STOP [1a] : 0x0000
I365_MEM1_OFF [1c] : 0x0000
I365_MEM1_PAGE [41] : 0x00
I365_MEM2_START [20] : 0x0000
I365_MEM2_STOP [22] : 0x0000
I365_MEM2_OFF [24] : 0x0000
I365_MEM2_PAGE [42] : 0x00
I365_MEM3_START [28] : 0x0000
I365_MEM3_STOP [2a] : 0x0000
I365_MEM3_OFF [2c] : 0x0000
I365_MEM3_PAGE [43] : 0x00
I365_MEM4_START [30] : 0x0000
I365_MEM4_STOP [32] : 0x0000
I365_MEM4_OFF [34] : 0x0000
I365_MEM4_PAGE [44] : 0x00
02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller
-- generic cardbus config registers
Vendor ID [00] : 0x104c
Device ID [02] : 0xac46
PCI command [04] : 0x0007
Base address [10] : 0xb1000000
Memory Base 0 [1c] : 0x40c00000
Memory Limit 0 [20] : 0x40fff000
Memory Base 1 [24] : 0x41000000
Memory Limit 1 [28] : 0x413ff000
IO Base 0 [2c] : 0x00004800
IO Limit 0 [30] : 0x000048fc
IO Base 1 [34] : 0x00004c00
IO Limit 1 [38] : 0x00004cfc
Bridge control [3e] : 0x0500
Subsystem vendor ID [40] : 0x1014
Subsystem device ID [42] : 0x0552
Legacy mode base [44] : 0x0001
-- TI specific config registers
System control [80] : 0x0840f071
IRQ Mux [8c] : 0x01d21b22
Retry [90] : 0xc0
Card control [91] : 0x22
Device control [92] : 0x64
Diagnostic [93] : 0x41
-- cardbus registers
CB_SOCKET_EVENT [00] : 0x00000000
CB_SOCKET_MASK [04] : 0x00000006
CB_SOCKET_STATE [08] : 0x30000a68
CB_SOCKET_FORCE [0c] : 0x00000000
CB_SOCKET_CONTROL [10] : 0x00000033
CB_SOCKET_POWER [20] : 0x02000000
-- exca registers
I365_IDENT [00] : 0x84
I365_STATUS [01] : 0x6c
I365_POWER [02] : 0x19
I365_INTCTL [03] : 0x50
I365_CSC [04] : 0x00
I365_CSCINT [05] : 0x08
I365_ADDRWIN [06] : 0x00
I365_IOCTL [07] : 0x00
I365_GENCTL [16] : 0x00c0
I365_GBLCTL [1e] : 0x0000
I365_IO0_START [08] : 0x0000
I365_IO0_STOP [0a] : 0x0001
I365_IO1_START [0c] : 0x0000
I365_IO1_STOP [0e] : 0x0001
I365_MEM0_START [10] : 0x0000
I365_MEM0_STOP [12] : 0x0000
I365_MEM0_OFF [14] : 0x0000
I365_MEM0_PAGE [40] : 0x00
I365_MEM1_START [18] : 0x0000
I365_MEM1_STOP [1a] : 0x0000
I365_MEM1_OFF [1c] : 0x0000
I365_MEM1_PAGE [41] : 0x00
I365_MEM2_START [20] : 0x0000
I365_MEM2_STOP [22] : 0x0000
I365_MEM2_OFF [24] : 0x0000
I365_MEM2_PAGE [42] : 0x00
I365_MEM3_START [28] : 0x0000
I365_MEM3_STOP [2a] : 0x0000
I365_MEM3_OFF [2c] : 0x0000
I365_MEM3_PAGE [43] : 0x00
I365_MEM4_START [30] : 0x0000
I365_MEM4_STOP [32] : 0x0000
I365_MEM4_OFF [34] : 0x0000
I365_MEM4_PAGE [44] : 0x00
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic