[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-pci
Subject:    [PATCH v5 6/9] PCI: mediatek: Enable msi after clock enabled
From:       <honghui.zhang () mediatek ! com>
Date:       2018-09-28 10:04:37
Message-ID: 1538129080-8206-7-git-send-email-honghui.zhang () mediatek ! com
[Download RAW message or body]

From: Honghui Zhang <honghui.zhang@mediatek.com>

The clocks was not enabled when enable MSI. This patch fix this
issue by calling mtk_pcie_enable_msi in mtk_pcie_startup_port_v2
since the clock was all enabled at that time.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
---
 drivers/pci/controller/pcie-mediatek.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index d150be1..be38b38 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -572,8 +572,6 @@ static int mtk_pcie_init_irq_domain(struct mtk_pcie_port *port,
 		ret = mtk_pcie_allocate_msi_domains(port);
 		if (ret)
 			return ret;
-
-		mtk_pcie_enable_msi(port);
 	}
 
 	return 0;
@@ -694,6 +692,9 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
 	val &= ~INTX_MASK;
 	writel(val, port->base + PCIE_INT_MASK);
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		mtk_pcie_enable_msi(port);
+
 	/* Set AHB to PCIe translation windows */
 	size = mem->end - mem->start;
 	val = lower_32_bits(mem->start) | AHB2PCIE_SIZE(fls(size));
-- 
2.6.4

[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic