[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-pci
Subject: Re: [PATCH v4 10/10] ARM: imx6sx: enable pcie on imx6sx sdb board
From: Fabio Estevam <festevam () gmail ! com>
Date: 2014-09-30 16:21:28
Message-ID: CAOMZO5A3Bdxdspc_UnJcQ-DVrmUXQCKW0W08msnDs7TELzXEJg () mail ! gmail ! com
[Download RAW message or body]
Hi Richard,
On Tue, Sep 30, 2014 at 6:36 AM, Richard Zhu <r65037@freescale.com> wrote:
> Signed-off-by: Richard Zhu <r65037@freescale.com>
> ---
> arch/arm/boot/dts/imx6sx-sdb.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
> index a3980d9..2976913 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dts
> @@ -251,6 +251,13 @@
> };
> };
>
> +&pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie>;
> + reset-gpio = <&gpio2 0 0>;
> + status = "okay";
> +};
There is also GPIO2_1 which is the PCIE_PWR_EN signal and should be
added as a GPIO controlled regulator.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic