[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-omap
Subject: [PATCH v5 8/8] MIPS: DTS: jz4780: add sgx gpu node
From: "H. Nikolaus Schaller" <hns () goldelico ! com>
Date: 2020-03-29 17:38:26
Message-ID: 894d8f16c933460639c5708afd0cabfa22b9c560.1585503505.git.hns () goldelico ! com
[Download RAW message or body]
and add interrupt and clocks.
Tested to build for CI20 board and load a driver.
Setup can not yet be tested since there is no working
HDMI driver for jz4780.
Suggested-by: Paul Boddie <paul@boddie.org.uk>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # CI20.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
arch/mips/boot/dts/ingenic/jz4780.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index bb89653d16a3..618e48c78a87 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -357,6 +357,17 @@ i2c4: i2c@10054000 {
status = "disabled";
};
+ gpu: gpu@13040000 {
+ compatible = "ingenic,jz4780-sgx540-120", "img,sgx540-120", "img,sgx540";
+ reg = <0x13040000 0x4000>;
+
+ clocks = <&cgu JZ4780_CLK_GPU>;
+ clock-names = "gpu";
+
+ interrupt-parent = <&intc>;
+ interrupts = <63>;
+ };
+
nemc: nemc@13410000 {
compatible = "ingenic,jz4780-nemc";
reg = <0x13410000 0x10000>;
--
2.25.1
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic