[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-omap
Subject: [PATCH] ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues
From: Adam Ford <aford173 () gmail ! com>
Date: 2018-04-30 23:24:34
Message-ID: 20180430232434.12756-1-aford173 () gmail ! com
[Download RAW message or body]
The VAUX3 rail from the PMIC powers a clock driver which clocks
the WL127x. This corrects a bug which did not correctly associate
the vin-supply with the proper power rail.
This also fixes a typo in the pinmuxing to properly configure the
interrupt pin.
Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index e3514fae414d..b02ae7808697 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -26,7 +26,7 @@
gpio = <&gpio1 3 0>; /* gpio_3 */
startup-delay-us = <70000>;
enable-active-high;
- vin-supply = <&vmmc2>;
+ vin-supply = <&vaux3>;
};
/* HS USB Host PHY on PORT 1 */
@@ -233,7 +233,7 @@
};
wl127x_gpio: pinmux_wl127x_gpio_pin {
pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
>;
};
@@ -266,6 +266,11 @@
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
+&vaux3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
&twl {
twl_power: power {
compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic