[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-omap
Subject:    [PATCH v4 13/14] ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node
From:       Kishon Vijay Abraham I <kishon () ti ! com>
Date:       2018-04-27 12:21:04
Message-ID: 20180427120905.3665-14-kishon () ti ! com
[Download RAW message or body]

While the supported UHS mode can be obtained from CAPA2
register, SD Host Controller Standard Specification
doesn't define bits for MMC's HS200 and DDR mode capability.
Add properties to indicate MMC HS200 and DDR speed mode capability in
dt node.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ae2f8dd46328..9dcd14edc202 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1086,6 +1086,8 @@
 			status = "disabled";
 			pbias-supply = <&pbias_mmc_reg>;
 			max-frequency = <192000000>;
+			mmc-ddr-1_8v;
+			mmc-ddr-3_3v;
 		};
 
 		hdqw1w: 1w@480b2000 {
@@ -1104,6 +1106,9 @@
 			max-frequency = <192000000>;
 			/* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */
 			sdhci-caps-mask = <0x7 0x0>;
+			mmc-hs200-1_8v;
+			mmc-ddr-1_8v;
+			mmc-ddr-3_3v;
 		};
 
 		mmc3: mmc@480ad000 {
-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic