[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-omap
Subject: [PATCH] omap: Keep nwires for omap1 and 2420 MMC controller (Re:
From: Tony Lindgren <tony () atomide ! com>
Date: 2010-09-30 18:38:19
Message-ID: 20100930183818.GK3117 () atomide ! com
[Download RAW message or body]
* Tony Lindgren <tony@atomide.com> [100923 16:00]:
> * Sukumar Ghorai <s-ghorai@ti.com> [100915 07:41]:
> > wires variable is renamed, extended and this single variable to be used to
> > pass the platform capabilities, e.g DDR mode. Also removed the hardcoded
> > value was using as bus-width.
>
> This looks like a nice clean-up, I'll queue this via the omap
> patches.
And of course this patch breaks all of mach-omap1 and omap2420.
Sukumar, your patch modified also drivers/mmc/host/omap.c and board-n8x0.c
to use caps instead of nwires. When you do things like that you absolutely
_must_test_your_changes_ before sending out any patches.
Planning on merging the following fix.
Tony
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 30 Sep 2010 10:25:46 -0700
Subject: [PATCH] Subject: [PATCH] omap: Keep nwires for omap1 and 2420 MMC controller
A patch from Sukumar Ghorai <s-ghorai@ti.com> changed the
nwires to use caps instead. However, nwires is still
needed for the earlier controller.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index abd7e77..6bd9d9a 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -488,7 +488,7 @@ static struct omap_mmc_platform_data mmc1_data = {
.max_freq = 24000000,
.dma_mask = 0xffffffff,
.slots[0] = {
- .caps = MMC_CAP_4_BIT_DATA,
+ .wires = 4,
.set_power = n8x0_mmc_set_power,
.set_bus_mode = n8x0_mmc_set_bus_mode,
.get_cover_state = n8x0_mmc_get_cover_state,
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 4f819fc..bc85010 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -73,9 +73,16 @@ struct omap_mmc_platform_data {
struct omap_mmc_slot_data {
- /* 4/8 wires and any additional host capabilities
- * need to OR'd all capabilities (ref. linux/mmc/host.h) */
- u32 caps;
+ /*
+ * 4/8 wires and any additional host capabilities
+ * need to OR'd all capabilities (ref. linux/mmc/host.h)
+ */
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2420)
+ u8 wires; /* Used for the MMC driver on omap1 and 2420 */
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ u32 caps; /* Used for the MMC driver on 2430 and later */
+#endif
/*
* nomux means "standard" muxing is wrong on this board, and
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index a9d62cf..d98ddcf 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
host->slots[id] = slot;
mmc->caps = 0;
- if (host->pdata->slots[id].caps & MMC_CAP_8_BIT_DATA)
+ if (host->pdata->slots[id].wires >= 4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic