[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-omap
Subject: Re: Patch: Init/shutdown correctness fixes for drivers/cbus/tahvo*
From: Felipe Balbi <felipe.balbi () nokia ! com>
Date: 2009-06-11 9:37:25
Message-ID: 20090611093725.GB15374 () nokia ! com
[Download RAW message or body]
Content-Description: tahvo-correctness.patch
> @@ -683,11 +682,23 @@ static int tahvo_usb_probe(struct platform_device *pdev)
>
> /* Attributes */
> ret = device_create_file(&(pdev->dev), &dev_attr_vbus_state);
> + if (ret) {
> + tahvo_free_irq(TAHVO_INT_VBUSON);
> + kfree(tu);
> + printk(KERN_ERR "attribute creation failed: %d\n", ret);
use dev_dbg(&pdev->dev, "...");
> @@ -703,8 +714,12 @@ static int tahvo_usb_probe(struct platform_device *pdev)
> ret = otg_set_transceiver(&tu->otg);
> if (ret < 0) {
> printk(KERN_ERR "Cannot register USB transceiver\n");
> - kfree(tu);
> tahvo_free_irq(TAHVO_INT_VBUSON);
> + device_remove_file(&(pdev->dev), &dev_attr_vbus_state);
> +#ifdef CONFIG_USB_OTG
> + device_remove_file(&(pdev->dev), &dev_attr_otg_mode);
> +#endif
> + kfree(tu);
> return ret;
> }
>
> @@ -718,6 +733,7 @@ static int tahvo_usb_probe(struct platform_device *pdev)
>
> static int tahvo_usb_remove(struct platform_device *pdev)
> {
> + struct tahvo_usb *tu = (struct tahvo_usb*) pdev->dev.driver_data;
tu = platform_get_drvdata(pdev);
> diff --git a/drivers/cbus/tahvo.c b/drivers/cbus/tahvo.c
> index 29fd4b8..09a69c0 100644
> --- a/drivers/cbus/tahvo.c
> +++ b/drivers/cbus/tahvo.c
> @@ -298,6 +298,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5,
> struct omap_em_asic_bb5_config);
> if (em_asic_config == NULL) {
> + tasklet_kill(&tahvo_tasklet);
> printk(KERN_ERR PFX "Unable to retrieve config data\n");
> return -ENODATA;
> }
> @@ -314,6 +315,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> tahvo_is_betty = 1;
> tahvo_7bit_backlight = 1;
> } else {
> + tasklet_kill(&tahvo_tasklet);
> printk(KERN_ERR "Tahvo/Betty chip not found");
> return -ENODEV;
> }
> @@ -324,6 +326,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> tahvo_irq_pin = em_asic_config->tahvo_irq_gpio;
>
> if ((ret = gpio_request(tahvo_irq_pin, "TAHVO irq")) < 0) {
> + tasklet_kill(&tahvo_tasklet);
> printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n");
> return ret;
> }
> @@ -342,6 +345,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> if (ret < 0) {
> printk(KERN_ERR PFX "Unable to register IRQ handler\n");
> gpio_free(tahvo_irq_pin);
> + tasklet_kill(&tahvo_tasklet);
> return ret;
> }
> #ifdef CONFIG_CBUS_TAHVO_USER
> @@ -350,6 +354,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> printk(KERN_ERR "Unable to initialize driver\n");
> free_irq(gpio_to_irq(tahvo_irq_pin), 0);
> gpio_free(tahvo_irq_pin);
> + tasklet_kill(&tahvo_tasklet);
> return ret;
> }
> #endif
I would like to see this as a series of goto like:
if (em_asic_config == NULL) {
ret = -ENODATA;
goto fail1;
}
...
ret = gpio_request(tahvo_irq_pin, "TAHVO irq");
if (ret < 0) {
...
goto failN;
}
failN:
...
...
fail2:
tasklet_kill(&tahvo_tasklet);
fail1:
return ret;
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic