[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-omap
Subject: MUSB Host problems
From: Gary Thomas <gary () mlbassoc ! com>
Date: 2009-06-09 17:45:57
Message-ID: 4A2E9FD5.9090807 () mlbassoc ! com
[Download RAW message or body]
I'm trying to get MUSB Host working on my 3530 platform (very
similar to the Beagle). When I startup, I get this message:
Clock usbhost_48m_fck didn't enable in 100000 tries
What does this mean? How do I fix it?
Currently, the USB subsystem finds the various hubs (ports 0-2).
The OTG port (0) works great. When I plug in a device to USB-1,
it sees it, but immediately gives up :-(
ehci-omap ehci-omap.0: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1: status 0501 change 0001
hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ehci-omap ehci-omap.0: port 1 full speed --> companion
ehci-omap ehci-omap.0: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 1 not reset yet, waiting 50ms
ehci-omap ehci-omap.0: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
hub 1-0:1.0: unable to enumerate USB device on port 1
hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
hub 1-0:1.0: hub_suspend
Then it's dead. Any ideas?
Thanks
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic