[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-omap
Subject: Re: Patch: Init/shutdown correctness fixes for drivers/cbus/tahvo*
From: Tony Lindgren <tony () atomide ! com>
Date: 2009-06-02 18:28:55
Message-ID: 20090602182855.GL27332 () atomide ! com
[Download RAW message or body]
* Andrew de Quincey <adq_dvb@lidskialf.net> [090525 16:22]:
> This is a companion review patch to the cbus one that fixes
> init/shutdown correctness in drivers/cbus/tahvo*
>
This one is missing Signed-off-by also.
Tony
> commit 76dfa5c81201df2340e4f5902a4552dea449d771
> Author: Andrew de Quincey <adq@lidskialf.net>
> Date: Tue May 26 00:13:21 2009 +0100
>
> Fix tahvo errors
>
> diff --git a/drivers/cbus/tahvo-usb.c b/drivers/cbus/tahvo-usb.c
> index df74d28..5f70c44 100644
> --- a/drivers/cbus/tahvo-usb.c
> +++ b/drivers/cbus/tahvo-usb.c
> @@ -651,10 +651,9 @@ static int tahvo_usb_probe(struct platform_device *pdev)
> dev_dbg(&(pdev->dev), "probe\n");
>
> /* Create driver data */
> - tu = kmalloc(sizeof(*tu), GFP_KERNEL);
> + tu = kzalloc(sizeof(*tu), GFP_KERNEL);
> if (!tu)
> return -ENOMEM;
> - memset(tu, 0, sizeof(*tu));
> tu->pt_dev = pdev;
> #ifdef CONFIG_USB_OTG
> /* Default mode */
> @@ -683,11 +682,23 @@ static int tahvo_usb_probe(struct platform_device *pdev)
>
> /* Attributes */
> ret = device_create_file(&(pdev->dev), &dev_attr_vbus_state);
> + if (ret) {
> + tahvo_free_irq(TAHVO_INT_VBUSON);
> + kfree(tu);
> + printk(KERN_ERR "attribute creation failed: %d\n", ret);
> + return ret;
> + }
> +
> #ifdef CONFIG_USB_OTG
> - ret |= device_create_file(&(pdev->dev), &dev_attr_otg_mode);
> -#endif
> - if (ret)
> + ret = device_create_file(&(pdev->dev), &dev_attr_otg_mode);
> + if (ret) {
> + device_remove_file(&(pdev->dev), &dev_attr_vbus_state);
> + tahvo_free_irq(TAHVO_INT_VBUSON);
> + kfree(tu);
> printk(KERN_ERR "attribute creation failed: %d\n", ret);
> + return ret;
> + }
> +#endif
>
> /* Create OTG interface */
> tahvo_usb_power_off(tu);
> @@ -703,8 +714,12 @@ static int tahvo_usb_probe(struct platform_device *pdev)
> ret = otg_set_transceiver(&tu->otg);
> if (ret < 0) {
> printk(KERN_ERR "Cannot register USB transceiver\n");
> - kfree(tu);
> tahvo_free_irq(TAHVO_INT_VBUSON);
> + device_remove_file(&(pdev->dev), &dev_attr_vbus_state);
> +#ifdef CONFIG_USB_OTG
> + device_remove_file(&(pdev->dev), &dev_attr_otg_mode);
> +#endif
> + kfree(tu);
> return ret;
> }
>
> @@ -718,6 +733,7 @@ static int tahvo_usb_probe(struct platform_device *pdev)
>
> static int tahvo_usb_remove(struct platform_device *pdev)
> {
> + struct tahvo_usb *tu = (struct tahvo_usb*) pdev->dev.driver_data;
> dev_dbg(&(pdev->dev), "remove\n");
>
> tahvo_free_irq(TAHVO_INT_VBUSON);
> @@ -727,6 +743,7 @@ static int tahvo_usb_remove(struct platform_device *pdev)
> #ifdef CONFIG_USB_OTG
> device_remove_file(&(pdev->dev), &dev_attr_otg_mode);
> #endif
> + kfree(tu);
> return 0;
> }
>
> diff --git a/drivers/cbus/tahvo.c b/drivers/cbus/tahvo.c
> index 29fd4b8..09a69c0 100644
> --- a/drivers/cbus/tahvo.c
> +++ b/drivers/cbus/tahvo.c
> @@ -298,6 +298,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5,
> struct omap_em_asic_bb5_config);
> if (em_asic_config == NULL) {
> + tasklet_kill(&tahvo_tasklet);
> printk(KERN_ERR PFX "Unable to retrieve config data\n");
> return -ENODATA;
> }
> @@ -314,6 +315,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> tahvo_is_betty = 1;
> tahvo_7bit_backlight = 1;
> } else {
> + tasklet_kill(&tahvo_tasklet);
> printk(KERN_ERR "Tahvo/Betty chip not found");
> return -ENODEV;
> }
> @@ -324,6 +326,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> tahvo_irq_pin = em_asic_config->tahvo_irq_gpio;
>
> if ((ret = gpio_request(tahvo_irq_pin, "TAHVO irq")) < 0) {
> + tasklet_kill(&tahvo_tasklet);
> printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n");
> return ret;
> }
> @@ -342,6 +345,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> if (ret < 0) {
> printk(KERN_ERR PFX "Unable to register IRQ handler\n");
> gpio_free(tahvo_irq_pin);
> + tasklet_kill(&tahvo_tasklet);
> return ret;
> }
> #ifdef CONFIG_CBUS_TAHVO_USER
> @@ -350,6 +354,7 @@ static int __devinit tahvo_probe(struct platform_device *pdev)
> printk(KERN_ERR "Unable to initialize driver\n");
> free_irq(gpio_to_irq(tahvo_irq_pin), 0);
> gpio_free(tahvo_irq_pin);
> + tasklet_kill(&tahvo_tasklet);
> return ret;
> }
> #endif
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic