[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-omap
Subject:    [PATCH 1/7] omap2 arch: fix CONTROL_DEVCONF addresses for OMAP3430
From:       paul () pwsan ! com (Paul Walmsley)
Date:       2007-09-27 1:15:38
Message-ID: 20070927061256.563247668 () pwsan ! com
[Download RAW message or body]

OMAP3430 has two CONTROL_DEVCONF addresses, CONTROL_DEVCONF0 and 
CONTROL_DEVCONF1; define them both.  Also, the existing address for
CONTROL_DEVCONF0 was incorrect; fix it.

Signed-off-by: Paul Walmsley <paul@pwsan.com>

---
 include/asm-arm/arch-omap/omap34xx.h |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

Index: linux-omap/include/asm-arm/arch-omap/omap34xx.h
===================================================================
--- linux-omap.orig/include/asm-arm/arch-omap/omap34xx.h	2007-09-15 16:49:17.000000000 -0600
+++ linux-omap/include/asm-arm/arch-omap/omap34xx.h	2007-09-15 17:06:38.000000000 -0600
@@ -55,6 +55,12 @@
 
 #if defined(CONFIG_ARCH_OMAP3430)
 
+/*
+ * REVISIT: OMAP3430 has two CONTROL_DEVCONF registers, CONTROL_DEVCONF0
+ * and CONTROL_DEVCONF1.  We should probably split those defines, along
+ * with any other System Control Module registers and read/write fns,
+ * out to a separate scm.h file, and do this for 24xx also.
+ */
 #define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
 #define OMAP2_CM_BASE			OMAP3430_CM_BASE
 #define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
@@ -63,7 +69,8 @@
 #define OMAP2_L4_BASE			L4_34XX_BASE
 #define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
 #define OMAP2_CTRL_BASE			OMAP3430_CTRL_BASE
-#define OMAP34XX_CONTROL_DEVCONF	(L4_34XX_BASE + 0x274)
+#define OMAP34XX_CONTROL_DEVCONF0	(L4_34XX_BASE + 0x2274)
+#define OMAP34XX_CONTROL_DEVCONF1	(L4_34XX_BASE + 0x22D8)
 
 #endif
 

-- 

[prev in list] [next in list] [prev in thread] [next in thread]