[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-omap
Subject:    [PATCH] 150MHz clock [was: Re: New to OMAP...]
From:       tony () atomide ! com (Tony Lindgren)
Date:       2005-01-24 14:20:29
Message-ID: 20050124201942.GC14607 () atomide ! com
[Download RAW message or body]

* Ladislav Michl <ladis@linux-mips.org> [050124 11:21]:
> On Thu, Jan 20, 2005 at 02:05:56PM -0800, David Brownell wrote:
> > On Thursday 13 January 2005 12:38 am, you wrote:
> > > On Wed, Jan 12, 2005 at 04:01:32PM -0800, David Brownell wrote:
> > > 
> > > Well, I was running OMAP5910 at 168MHz for couple of months and didn't
> > > noticed any single problem. However it's always better to follow
> > > specification (except cases where it is clearly wrong, of course ;)),
> > > so I added following to arch/arm/mach-omap/clock.c
> > > 
> > > #if defined(CONFIG_OMAP_ARM_150MHZ)
> > > 	{ 150000000, 12000000, 150000000, 0x150a, 0x2cb0 }, /*0/0/1/1/2/2 */
> > > #endif
> > 
> > It might be good if you wrapped that up as a complete patch (including
> > Kconfig) and sent it in ...
> 
> I hope it will still apply to BK repository. In case of troubles I'll
> update to current BK and resync.

Thanks, yes it applies. I'll push it today along with an update to
2.6.11-rc2 today.

> As a side note OMAP_ARM_182MHZ dependency on ARCH_OMAP730 is already
> handled via Kconfig so there is no need to duplicate it in C file.
> I'll send separate patch for it.

OK

Tony

[prev in list] [next in list] [prev in thread] [next in thread]