[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-msdos
Subject: Re: Incomplete directory listing with DOSEMU 0.98.1
From: ebiederm+eric () npwt ! net (Eric W ! Biederman)
Date: 1998-09-27 22:10:29
[Download RAW message or body]
>>>>> "R>" == roger <roger@kea.grace.cri.nz> writes:
>> The only thing I can think of is sometimes I have seen sensitivity to just
>> how you typed the name in the lredir, or emufs command.
R>> See below.
>> Changes in compiler, libc version, and configuration are to be suspected.
R>> I am running Linux v2.1.115, gcc 2.7.2.3, libc.so.5.4.44.
R>> Previously (with Linux v.2.0.35) I used libc.so.5.4.33.
Groan. Except for your kernel version there isn't anything bleeding edge.
So unless you have triggered a rare kernel bug it's almost certainly a
real problem, that your particular setup triggers.
R>> I wonder if this could be the problem?
R>> Perhaps there are compatibility problems between DOSEMU and this
R>> Linux version, or with libc v.5.4.44?
There are none generally known.
R>> Best Regards,
R>> Roger Young.
R>> ......................................................................
R>> rem this sets up the redirector to look at the Linux root directory.
R>> rem this is probably not a good idea once you have dosemu installed
R>> lastdrive=z
R>> dos=high,umb
R>> rem device=c:\emu\emufs.sys /
R>> devicehigh=c:\emu\ems.sys
Delete the above line. Hopefully it is harmless but lredir doesn't need it,
and without the path this might confuse the system.
R>> install=c:\emu\lredir.exe d: linux\fs/dosc
R>> install=c:\emu\lredir.exe e: linux\fs/dosd
R>> install=c:\emu\lredir.exe g: linux\fs\/
It might be a tad safer to say
c:\emu\lredir.exe g: linux\fs\
R>> ......................................................................
R>> @ECHO OFF
R>> echo "Welcome to dosemu 0.98.1!"
R>> PATH=C:\DOS;C:\EMU;E:\DOS
R>> PROMPT $p$g
R>> SET TEMP=E:\TEMP
R>> .....................................................................
cpu=586 is a tad questionable cpu=386 seems more stable
hogthreshold=1 is questionable as that is the maximum hogthreshold
setting, 20 or 40 are generally better values
Eric
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic