[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-mmc
Subject:    [PATCH AUTOSEL 4.14 103/170] mmc: sdhci-xenon: Fix timeout checks
From:       Sasha Levin <sashal () kernel ! org>
Date:       2019-01-28 16:10:53
Message-ID: 20190128161200.55107-103-sashal () kernel ! org
[Download RAW message or body]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 0e6e7c2ff397e1bbebc882ca3132148aaaef1ddd ]

Always check the wait condition before returning timeout.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Zhoujie Wu <zjwu@marvell.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-xenon-phy.c | 10 +++++++---
 drivers/mmc/host/sdhci-xenon.c     | 10 +++++++---
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index ec8794335241..82051f2b7191 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -357,9 +357,13 @@ static int xenon_emmc_phy_enable_dll(struct sdhci_host *host)
 
 	/* Wait max 32 ms */
 	timeout = ktime_add_ms(ktime_get(), 32);
-	while (!(sdhci_readw(host, XENON_SLOT_EXT_PRESENT_STATE) &
-		XENON_DLL_LOCK_STATE)) {
-		if (ktime_after(ktime_get(), timeout)) {
+	while (1) {
+		bool timedout = ktime_after(ktime_get(), timeout);
+
+		if (sdhci_readw(host, XENON_SLOT_EXT_PRESENT_STATE) &
+		    XENON_DLL_LOCK_STATE)
+			break;
+		if (timedout) {
 			dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
 			return -ETIMEDOUT;
 		}
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 4d0791f6ec23..a0b5089b3274 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -34,9 +34,13 @@ static int xenon_enable_internal_clk(struct sdhci_host *host)
 	sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
 	/* Wait max 20 ms */
 	timeout = ktime_add_ms(ktime_get(), 20);
-	while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
-			& SDHCI_CLOCK_INT_STABLE)) {
-		if (ktime_after(ktime_get(), timeout)) {
+	while (1) {
+		bool timedout = ktime_after(ktime_get(), timeout);
+
+		reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+		if (reg & SDHCI_CLOCK_INT_STABLE)
+			break;
+		if (timedout) {
 			dev_err(mmc_dev(host->mmc), "Internal clock never stabilised.\n");
 			return -ETIMEDOUT;
 		}
-- 
2.19.1

[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic