[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-mmc
Subject: [PATCH 1/2] Documentation: synopsys-dw-mshc: add binding for reset-names
From: Jaehoon Chung <jh80.chung () samsung ! com>
Date: 2016-10-31 2:49:41
Message-ID: 20161031024942.4415-2-jh80.chung () samsung ! com
[Download RAW message or body]
Add reset-names property for binding dw-mmc controller.
It might be used together with "reset" property.
- Note: It must be "reset" as name.
Fixes: d6786fefe816 ("mmc: dw_mmc: add reset support to dwmmc host controller")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt \
b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 4e00e85..bfa461a \
100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -43,6 +43,9 @@ Optional properties:
reset signal present internally in some host controller IC designs.
See Documentation/devicetree/bindings/reset/reset.txt for details.
+* reset-names: request name for using "resets" property. Must be "reset".
+ (It will be used together with "resets" property.)
+
* clocks: from common clock binding: handle to biu and ciu clocks for the
bus interface unit clock and the card interface unit clock.
@@ -103,6 +106,8 @@ board specific portions as listed below.
interrupts = <0 75 0>;
#address-cells = <1>;
#size-cells = <0>;
+ resets = <&rst 20>;
+ reset-names = "reset";
};
[board specific internal DMA resources]
--
2.10.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic