[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-mips
Subject:    Re: [PATCH 1/3] Document: devicetree: add OF documents for MIPS interrupt controller
From:       David Daney <ddaney.cavm () gmail ! com>
Date:       2013-01-31 17:07:09
Message-ID: 510AA4BD.2030000 () gmail ! com
[Download RAW message or body]

On 01/31/2013 05:20 AM, John Crispin wrote:
> Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: David Daney <david.daney@cavium.com>

> ---
> Documentation/devicetree/bindings/mips/cpu_irq.txt |   47 ++++++++++++++++++++
> 1 file changed, 47 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mips/cpu_irq.txt
> 
> diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt \
> b/Documentation/devicetree/bindings/mips/cpu_irq.txt new file mode 100644
> index 0000000..13aa4b6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
> @@ -0,0 +1,47 @@
> +MIPS CPU interrupt controller
> +
> +On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
> +IRQs from a devicetree file and create a irq_domain for IRQ controller.
> +
> +With the irq_domain in place we can describe how the 8 IRQs are wired to the
> +platforms internal interrupt controller cascade.
> +
> +Below is an example of a platform describing the cascade inside the devicetree
> +and the code used to load it inside arch_init_irq().
> +
> +Required properties:
> +- compatible : Should be "mti,cpu-interrupt-controller"
> +
> +Example devicetree:
> +	cpu-irq: cpu-irq@0 {
> +		#address-cells = <0>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		compatible = "mti,cpu-interrupt-controller";
> +	};
> +
> +	intc: intc@200 {
> +		compatible = "ralink,rt2880-intc";
> +		reg = <0x200 0x100>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		interrupt-parent = <&cpu-irq>;
> +		interrupts = <2>;
> +	};
> +
> +
> +Example platform irq.c:
> +static struct of_device_id __initdata of_irq_ids[] = {
> +	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
> +	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
> +	{},
> +};
> +
> +void __init arch_init_irq(void)
> +{
> +	of_irq_init(of_irq_ids);
> +}
> 


[prev in list] [next in list] [prev in thread] [next in thread]