[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-mips
Subject: [RFC] Implement clockevents/clocksource for R4000-style cp0 timer
From: Franck Bui-Huu <vagabon.xyz () gmail ! com>
Date: 2007-06-29 12:30:35
Message-ID: 4684FB6B.90200 () innova-card ! com
[Download RAW message or body]
Hi,
This new take takes into account most of points raised by Sergei.
Changes since take #3:
---------------------
- Rename CP0_CLOCKS into CP0_TIMER and get rid of all 'hpt'
references.
- perf counter handler is no more integrated in timer-cp0.c. Use
shared interrupt instead.
- Do not include any dyntick or hrtimer related stuffs in this
patch.
- Killed hpt.h header file. All is now in time.h.
- Minor cleanups.
TODO:
-----
- There are still few places to fix that uses 'mips_hpt_frequency'
global.
- If this patch is accepted, fix all platforms that use cp0
counter.
- Rewrite calibrate_timer() to be generic.
Please consider,
Franck
-- 8< --
Subject: [PATCH] Implement clockevents for R4000-style cp0 timer
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
---
arch/mips/Kconfig | 8 +
arch/mips/kernel/Makefile | 2 +
arch/mips/kernel/smp.c | 2 +
arch/mips/kernel/time.c | 436 +++++++-----------------------------------
arch/mips/kernel/timer-cp0.c | 230 ++++++++++++++++++++++
include/asm-mips/time.h | 70 +++----
6 files changed, 347 insertions(+), 401 deletions(-)
create mode 100644 arch/mips/kernel/timer-cp0.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7bcf38d..a03c13b 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -723,6 +723,14 @@ config GENERIC_TIME
bool
default y
+config GENERIC_CLOCKEVENTS
+ bool
+ default y
+
+config CP0_TIMER
+ bool
+ default y
+
config GENERIC_CMOS_UPDATE
bool
default y
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 4924626..61564ff 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -11,6 +11,8 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
irix5sys.o sysirix.o
+obj-$(CONFIG_CP0_TIMER) += timer-cp0.o
+
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_MODULES) += mips_ksyms.o module.o
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 67edfa7..7677237 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -37,6 +37,7 @@
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/smp.h>
+#include <asm/time.h>
#ifdef CONFIG_MIPS_MT_SMTC
#include <asm/mipsmtregs.h>
@@ -79,6 +80,7 @@ asmlinkage __cpuinit void start_secondary(void)
cpu_probe();
cpu_report();
per_cpu_trap_init();
+ setup_cp0_hpt_clockevent();
prom_init_secondary();
/*
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 72df0bf..306fc46 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -1,48 +1,16 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (c) 2003, 2004 Maciej W. Rozycki
- *
- * Common time service routines for MIPS machines. See
- * Documentation/mips/time.README.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/param.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/smp.h>
#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/clocksource.h> /* cycle_t */
-#include <asm/bootinfo.h>
-#include <asm/cache.h>
-#include <asm/compiler.h>
-#include <asm/cpu.h>
-#include <asm/cpu-features.h>
-#include <asm/div64.h>
-#include <asm/sections.h>
#include <asm/time.h>
/*
- * The integer part of the number of usecs per jiffy is taken from tick,
- * but the fractional part is not recorded, so we calculate it using the
- * initial value of HZ. This aids systems where tick isn't really an
- * integer (e.g. for HZ = 128).
+ * This is the freq of the tick timer of the platform. It's not
+ * always a _high_ precision timer as its name suggests.
+ *
+ * FIXME: Is it really needed ? shouldn't it be a per cpu value ?
*/
-#define USECS_PER_JIFFY TICK_SIZE
-#define USECS_PER_JIFFY_FRAC ((unsigned long)(u32)((1000000ULL << 32) / HZ))
-
-#define TICK_SIZE (tick_nsec / 1000)
+unsigned int mips_hpt_frequency __read_mostly;
/*
* RTC. By default we provide the null RTC hooks
@@ -68,6 +36,8 @@ int __weak mips_rtc_set_mmss(unsigned long time)
/*
* FIXME: we need to init rtc earlier since timekeeping_init()
* is called before time_init().
+ *
+ * Actually this should be handled by /driver/rtc drivers...
*/
unsigned long read_persistent_clock(void)
{
@@ -79,264 +49,100 @@ int update_persistent_clock(struct timespec now)
return mips_rtc_set_mmss(now.tv_sec);
}
-/* how many counter cycles in a jiffy */
-static unsigned long cycles_per_jiffy __read_mostly;
-
-/* expirelo is the count value for next CPU timer interrupt */
-static unsigned int expirelo;
-
-
-/*
- * Null timer ack for systems not needing one (e.g. i8254).
- */
-static void null_timer_ack(void) { /* nothing */ }
-
-/*
- * Null high precision timer functions for systems lacking one.
- */
-static cycle_t null_hpt_read(void)
-{
- return 0;
-}
-
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
- unsigned int count;
-
- /* Ack this timer interrupt and set the next one. */
- expirelo += cycles_per_jiffy;
- write_c0_compare(expirelo);
-
- /* Check to see if we have missed any timer interrupts. */
- while (((count = read_c0_count()) - expirelo) < 0x7fffffff) {
- /* missed_timer_count++; */
- expirelo = count + cycles_per_jiffy;
- write_c0_compare(expirelo);
- }
-}
-
/*
- * High precision timer functions for a R4k-compatible timer.
+ * The performance counter overflow interrupt may be shared with the
+ * timer interrupt. If it is (!r2) then we can't reliably determine if
+ * a counter interrupt has also happened. So we don't let the timer
+ * handler run.
*/
-static cycle_t c0_hpt_read(void)
-{
- return read_c0_count();
-}
-/* For use both as a high precision timer and an interrupt source. */
-static void __init c0_hpt_timer_init(void)
-{
- expirelo = read_c0_count() + cycles_per_jiffy;
- write_c0_compare(expirelo);
-}
+static DEFINE_SPINLOCK(perf_counter_lock);
+static int (*perf_counter_handler)(void);
-int (*mips_timer_state)(void);
-void (*mips_timer_ack)(void);
-
-/*
- * local_timer_interrupt() does profiling and process accounting
- * on a per-CPU basis.
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- *
- * In SMP mode, it might invoked by per-CPU timer interrupt, or
- * a broadcasted inter-processor interrupt which itself is triggered
- * by the global timer interrupt.
- */
-void local_timer_interrupt(int irq)
-{
- profile_tick(CPU_PROFILING);
- update_process_times(user_mode(get_irq_regs()));
-}
-
-/*
- * High-level timer interrupt service routines. This function
- * is set as irqaction->handler and is invoked through do_IRQ.
- */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+irqreturn_t perf_counter_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
+ const int r2 = cpu_has_mips_r2;
+ irqreturn_t rv = IRQ_NONE;
- mips_timer_ack();
+ spin_lock(&perf_counter_lock);
/*
- * call the generic timer interrupt handling
+ * None is using the performance counter.
*/
- do_timer(1);
-
- write_sequnlock(&xtime_lock);
+ if (perf_counter_handler == NULL)
+ goto out;
/*
- * In UP mode, we call local_timer_interrupt() to do profiling
- * and process accouting.
- *
- * In SMP mode, local_timer_interrupt() is invoked by appropriate
- * low-level local timer interrupt handler.
+ * Suckage alert: Before R2 of the architecture there was no
+ * way to see if a performance counter interrupt was pending,
+ * so we have to run the performance counter interrupt handler
+ * anyway.
*/
- local_timer_interrupt(irq);
-
- return IRQ_HANDLED;
+ if (!r2 || (read_c0_cause() & (1 << 26)))
+ rv = perf_counter_handler();
+out:
+ spin_unlock(&perf_counter_lock);
+ return rv;
}
-int null_perf_irq(void)
+void perf_counter_install_handler(int (*handler)(void))
{
- return 0;
-}
+ unsigned long flags;
-EXPORT_SYMBOL(null_perf_irq);
-
-int (*perf_irq)(void) = null_perf_irq;
-
-EXPORT_SYMBOL(perf_irq);
+ spin_lock_irqsave(&perf_counter_lock, flags);
+ perf_counter_handler = handler;
+ spin_unlock_irqrestore(&perf_counter_lock, flags);
+}
+EXPORT_SYMBOL(perf_counter_install_handler);
/*
- * Performance counter IRQ or -1 if shared with timer
+ * The performance counter overflow interrupt may be
+ * shared with the timer interrupt.
*/
-int mipsxx_perfcount_irq;
-EXPORT_SYMBOL(mipsxx_perfcount_irq);
+static struct irqaction perf_counter_irqaction = {
+ .handler = perf_counter_interrupt,
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_SHARED,
+ .name = "perf-counter",
+};
+
+void __init __weak plat_perf_setup(struct irqaction *action)
+{
+ /* nothing */
+}
/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
+ *
*/
-static inline int handle_perf_irq(int r2)
+void __init time_init(void)
{
/*
- * The performance counter overflow interrupt may be shared with the
- * timer interrupt (mipsxx_perfcount_irq < 0). If it is and a
- * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
- * and we can't reliably determine if a counter interrupt has also
- * happened (!r2) then don't check for a timer interrupt.
+ * If you still don't use the new RTC class, it's time to
+ * setup your RTC. That's a bit broken since your RTC has
+ * already been used by timekeeping_init()...
*/
- return (mipsxx_perfcount_irq < 0) &&
- perf_irq() == IRQ_HANDLED &&
- !r2;
-}
-
-extern void smtc_timer_broadcast(int);
-
-void ll_timer_interrupt(int irq)
-{
- int cpu = smp_processor_id();
- int r2 = cpu_has_mips_r2;
-
- irq_enter();
- kstat_this_cpu.irqs[irq]++;
+ plat_time_init();
-#ifdef CONFIG_MIPS_MT_SMTC
/*
- * In an SMTC system, one Count/Compare set exists per VPE.
- * Which TC within a VPE gets the interrupt is essentially
- * random - we only know that it shouldn't be one with
- * IXMT set. Whichever TC gets the interrupt needs to
- * send special interprocessor interrupts to the other
- * TCs to make sure that they schedule, etc.
- *
- * That code is specific to the SMTC kernel, not to
- * the a particular platform, so it's invoked from
- * the general MIPS timer_interrupt routine.
+ * Optional: for perf counter users.
*/
+ plat_perf_setup(&perf_counter_irqaction);
/*
- * We could be here due to timer interrupt,
- * perf counter overflow, or both.
+ * Setup platform tick timer.
*/
- (void) handle_perf_irq(1);
-
- if (read_c0_cause() & (1 << 30)) {
- /*
- * There are things we only want to do once per tick
- * in an "MP" system. One TC of each VPE will take
- * the actual timer interrupt. The others will get
- * timer broadcast IPIs. We use whoever it is that takes
- * the tick on VPE 0 to run the full timer_interrupt().
- */
- if (cpu_data[cpu].vpe_id == 0) {
- timer_interrupt(irq, NULL);
- } else {
- write_c0_compare(read_c0_count() +
- (mips_hpt_frequency/HZ));
- local_timer_interrupt(irq);
- }
- smtc_timer_broadcast(cpu_data[cpu].vpe_id);
- }
-#else /* CONFIG_MIPS_MT_SMTC */
- if (handle_perf_irq(r2))
- goto out;
-
- if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
- goto out;
-
- if (cpu == 0) {
- /*
- * CPU 0 handles the global timer interrupt job and process
- * accounting resets count/compare registers to trigger next
- * timer int.
- */
- timer_interrupt(irq, NULL);
- } else {
- /* Everyone else needs to reset the timer int here as
- ll_local_timer_interrupt doesn't */
- /*
- * FIXME: need to cope with counter underflow.
- * More support needs to be added to kernel/time for
- * counter/timer interrupts on multiple CPU's
- */
- write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
-
- /*
- * Other CPUs should do profiling and process accounting
- */
- local_timer_interrupt(irq);
- }
-out:
-#endif /* CONFIG_MIPS_MT_SMTC */
-
- irq_exit();
+ plat_timer_setup();
}
-asmlinkage void ll_local_timer_interrupt(int irq)
-{
- irq_enter();
- if (smp_processor_id() != 0)
- kstat_this_cpu.irqs[irq]++;
-
- /* we keep interrupt disabled all the time */
- local_timer_interrupt(irq);
-
- irq_exit();
-}
-
/*
- * time_init() - it does the following things.
- *
- * 1) plat_time_init() -
- * a) (optional) set up RTC routines,
- * b) (optional) calibrate and set the mips_hpt_frequency
- * (only needed if you intended to use cpu counter as timer interrupt
- * source)
- * 2) calculate a couple of cached variables for later usage
- * 3) plat_timer_setup() -
- * a) (optional) over-write any choices made above by time_init().
- * b) machine specific code should setup the timer irqaction.
- * c) enable the timer interrupt
+ * If you don't know timer 'X' frequency and have another timer 'Y'
+ * that flips at HZ rate, you can use this helper to determinate the
+ * timer 'X' freq.
*/
-
-unsigned int mips_hpt_frequency;
-
-static struct irqaction timer_irqaction = {
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .name = "timer",
-};
-
-static unsigned int __init calibrate_hpt(void)
+unsigned __init calibrate_timer(cycle_t (*x_read)(void),
+ int (*y_state)(void))
{
- cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
+ cycle_t freq, start, end, count, hz;
const int loops = HZ / 10;
int log_2_loops = 0;
@@ -354,118 +160,24 @@ static unsigned int __init calibrate_hpt(void)
/*
* Wait for a rising edge of the timer interrupt.
*/
- while (mips_timer_state());
- while (!mips_timer_state());
+ while (y_state());
+ while (!y_state());
/*
* Now see how many high precision timer ticks happen
* during the calculated number of periods between timer
* interrupts.
*/
- hpt_start = clocksource_mips.read();
+ start = x_read();
do {
- while (mips_timer_state());
- while (!mips_timer_state());
+ while (y_state());
+ while (!y_state());
} while (--i);
- hpt_end = clocksource_mips.read();
+ end = x_read();
- hpt_count = (hpt_end - hpt_start) & clocksource_mips.mask;
+ count = end - start;
hz = HZ;
- frequency = hpt_count * hz;
-
- return frequency >> log_2_loops;
-}
-
-struct clocksource clocksource_mips = {
- .name = "MIPS",
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void __init init_mips_clocksource(void)
-{
- u64 temp;
- u32 shift;
-
- if (!mips_hpt_frequency || clocksource_mips.read == null_hpt_read)
- return;
-
- /* Calclate a somewhat reasonable rating value */
- clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- /* Find a shift value */
- for (shift = 32; shift > 0; shift--) {
- temp = (u64) NSEC_PER_SEC << shift;
- do_div(temp, mips_hpt_frequency);
- if ((temp >> 32) == 0)
- break;
- }
- clocksource_mips.shift = shift;
- clocksource_mips.mult = (u32)temp;
-
- clocksource_register(&clocksource_mips);
-}
-
-void __init __weak plat_time_init(void)
-{
-}
-
-void __init time_init(void)
-{
- plat_time_init();
-
- /* Choose appropriate high precision timer routines. */
- if (!cpu_has_counter && !clocksource_mips.read)
- /* No high precision timer -- sorry. */
- clocksource_mips.read = null_hpt_read;
- else if (!mips_hpt_frequency && !mips_timer_state) {
- /* A high precision timer of unknown frequency. */
- if (!clocksource_mips.read)
- /* No external high precision timer -- use R4k. */
- clocksource_mips.read = c0_hpt_read;
- } else {
- /* We know counter frequency. Or we can get it. */
- if (!clocksource_mips.read) {
- /* No external high precision timer -- use R4k. */
- clocksource_mips.read = c0_hpt_read;
-
- if (!mips_timer_state) {
- /* No external timer interrupt -- use R4k. */
- mips_timer_ack = c0_timer_ack;
- /* Calculate cache parameters. */
- cycles_per_jiffy =
- (mips_hpt_frequency + HZ / 2) / HZ;
- /*
- * This sets up the high precision
- * timer for the first interrupt.
- */
- c0_hpt_timer_init();
- }
- }
- if (!mips_hpt_frequency)
- mips_hpt_frequency = calibrate_hpt();
-
- /* Report the high precision timer rate for a reference. */
- printk("Using %u.%03u MHz high precision timer.\n",
- ((mips_hpt_frequency + 500) / 1000) / 1000,
- ((mips_hpt_frequency + 500) / 1000) % 1000);
- }
-
- if (!mips_timer_ack)
- /* No timer interrupt ack (e.g. i8254). */
- mips_timer_ack = null_timer_ack;
-
- /*
- * Call board specific timer interrupt setup.
- *
- * this pointer must be setup in machine setup routine.
- *
- * Even if a machine chooses to use a low-level timer interrupt,
- * it still needs to setup the timer_irqaction.
- * In that case, it might be better to set timer_irqaction.handler
- * to be NULL function so that we are sure the high-level code
- * is not invoked accidentally.
- */
- plat_timer_setup(&timer_irqaction);
+ freq = count * hz;
- init_mips_clocksource();
+ return freq >> log_2_loops;
}
diff --git a/arch/mips/kernel/timer-cp0.c b/arch/mips/kernel/timer-cp0.c
new file mode 100644
index 0000000..bd4d3b9
--- /dev/null
+++ b/arch/mips/kernel/timer-cp0.c
@@ -0,0 +1,230 @@
+/*
+ * timer-cp0.c - CP0 timer driver
+ *
+ * Copyright (C) 2007, Franck Bui-Huu <fbuihuu@gmail.com>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2 (GPL v2).
+ */
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+
+#include <asm/time.h>
+
+
+#define CP0_NAME "cp0-count"
+
+static unsigned (*get_freq)(int cpu) __initdata;
+
+/*
+ * cp0 clocks can be disabled by boot command line
+ */
+static int disable_clockevent __initdata;
+static int disable_clocksource __initdata;
+
+static int __init cp0_timer_setup(char *arg)
+{
+ if (arg == NULL)
+ return -EINVAL;
+
+ if (!strcmp(arg, "noevent"))
+ disable_clockevent = 1;
+ else if (!strcmp(arg, "nosource"))
+ disable_clocksource = 1;
+ else if (!strcmp(arg, "none")) {
+ disable_clocksource = 1;
+ disable_clockevent = 1;
+ }
+ return 0;
+}
+early_param("cp0_timer", cp0_timer_setup);
+
+/*
+ * cp0 count/compare operations.
+ */
+static void cp0_count_ack(void)
+{
+ write_c0_compare(read_c0_compare());
+}
+
+static cycle_t cp0_count_read(void)
+{
+ return read_c0_count();
+}
+
+/*
+ * Clocksource device. Its rating should not depend on its frequency:
+ * stability is a feature more valuable for a clock source.
+ */
+struct clocksource cp0_clocksource = {
+ .name = CP0_NAME,
+ .rating = 200,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = cp0_count_read,
+};
+
+static void __init setup_cp0_clocksource(void)
+{
+ unsigned freq = get_freq(smp_processor_id());
+ unsigned shift;
+ u64 mult;
+
+ for (shift = 32; shift > 0; shift--) {
+ mult = (u64)NSEC_PER_SEC << shift;
+ do_div(mult, freq);
+ if ((mult >> 32) == 0)
+ break;
+ }
+
+ cp0_clocksource.shift = shift;
+ cp0_clocksource.mult = mult;
+
+ clocksource_register(&cp0_clocksource);
+}
+
+/*
+ * High precision timer functions
+ */
+static int cp0_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned int cnt;
+
+ BUG_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT);
+
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
+
+ return ((long)(read_c0_count() - cnt) > 0L) ? -ETIME : 0;
+}
+
+static void cp0_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /*
+ * For now, we don't disable cp0 timer interrupts. So
+ * we leave them enabled, and ignore them in this
+ * mode. Therefore we will get one useless but also
+ * harmless interrupt every 2^32 cycles...
+ */
+ cp0_count_ack();
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* nothing to do */
+ break;
+ case CLOCK_EVT_MODE_PERIODIC:
+ BUG();
+ };
+}
+
+static struct clock_event_device cp0_clockevent __initdata = {
+ .name = CP0_NAME,
+ .mode = CLOCK_EVT_MODE_UNUSED,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_mode = cp0_set_mode,
+ .set_next_event = cp0_set_next_event,
+ .irq = -1,
+};
+
+static DEFINE_PER_CPU(struct clock_event_device, cp0_clock_events);
+
+void __init setup_cp0_clockevent(void)
+{
+ struct clock_event_device *evt;
+ int cpu = smp_processor_id();
+ unsigned freq;
+
+ if (disable_clockevent)
+ return;
+
+ evt = &per_cpu(cp0_clock_events, cpu);
+
+ memcpy(evt, &cp0_clockevent, sizeof(*evt));
+
+ freq = get_freq(cpu);
+
+ evt->rating = 200 + freq/10000000;
+ evt->mult = div_sc(freq, NSEC_PER_SEC, evt->shift);
+ evt->cpumask = cpumask_of_cpu(cpu);
+
+ evt->max_delta_ns = clockevent_delta2ns(0x7fffffff, evt);
+ evt->min_delta_ns = clockevent_delta2ns(0x10, evt);
+
+ clockevents_register_device(evt);
+
+ printk("Using %u.%03u MHz CP0 timer on CPU #%d.\n",
+ ((freq + 500) / 1000) / 1000,
+ ((freq + 500) / 1000) % 1000,
+ cpu);
+}
+
+static irqreturn_t cp0_clockevent_interrupt(int irq, void *dev_id)
+{
+ /*
+ * Before release 2 of the architecture, there was no way to
+ * see if a timer interrupt was pending. But the perf counter
+ * handler, if installed, has already dealt with this irq.
+ * Being the paranoiacs we are we check anyway.
+ */
+ if (!cpu_has_mips_r2 || (read_c0_cause() & (1 << 30))) {
+ struct clock_event_device *evt;
+
+ evt = &__get_cpu_var(cp0_clock_events);
+
+ /*
+ * We can get interrupts whereas the clockevent
+ * device has been disabled since we can't shut them
+ * down. So always ack the timer.
+ */
+ cp0_count_ack();
+
+ if (likely(evt->mode == CLOCK_EVT_MODE_ONESHOT))
+ evt->event_handler(evt);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction cp0_clockevent_irqaction = {
+ .handler = cp0_clockevent_interrupt,
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_SHARED,
+ .name = CP0_NAME,
+};
+
+
+/*
+ * This function is used by platforms which use the cp0 counter as
+ * clock source and/or event devices.
+ */
+int __init setup_cp0_timer(struct cp0_timer_info *info)
+{
+ if (!cpu_has_counter)
+ goto disable_all;
+
+ if (info->get_freq == NULL)
+ goto disable_all;
+ get_freq = info->get_freq;
+
+ if (info->irq == 0)
+ disable_clockevent = 1;
+
+ if (!disable_clocksource)
+ setup_cp0_clocksource();
+ if (!disable_clockevent) {
+ setup_cp0_clockevent();
+ setup_irq(info->irq, &cp0_clockevent_irqaction);
+ }
+ return 0;
+
+disable_all:
+ disable_clocksource = disable_clockevent = 1;
+ return -EINVAL;
+}
diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h
index 33645ed..2ed0baa 100644
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -16,12 +16,8 @@
#ifndef _ASM_TIME_H
#define _ASM_TIME_H
-#include <linux/interrupt.h>
-#include <linux/linkage.h>
-#include <linux/ptrace.h>
+#include <linux/clocksource.h> /* cycle_t */
#include <linux/rtc.h>
-#include <linux/spinlock.h>
-#include <linux/clocksource.h>
extern spinlock_t rtc_lock;
@@ -33,20 +29,6 @@ extern int mips_rtc_set_time(unsigned long sec);
extern int mips_rtc_set_mmss(unsigned long time);
/*
- * Timer interrupt functions.
- * mips_timer_state is needed for high precision timer calibration.
- * mips_timer_ack may be NULL if the interrupt is self-recoverable.
- */
-extern int (*mips_timer_state)(void);
-extern void (*mips_timer_ack)(void);
-
-/*
- * High precision timer clocksource.
- * If .read is NULL, an R4k-compatible timer setup is attempted.
- */
-extern struct clocksource clocksource_mips;
-
-/*
* to_tm() converts system time back to (year, mon, day, hour, min, sec).
* It is intended to help implement rtc_set_time() functions.
* Copied from PPC implementation.
@@ -54,32 +36,42 @@ extern struct clocksource clocksource_mips;
extern void to_tm(unsigned long tim, struct rtc_time *tm);
/*
- * high-level timer interrupt routines.
+ * board madatory hooks called by time_init().
*/
-extern irqreturn_t timer_interrupt(int irq, void *dev_id);
+extern void plat_time_init(void);
+extern void plat_timer_setup(void);
/*
- * the corresponding low-level timer interrupt routine.
+ * Install a handler which is going to be called when a
+ * performance counter overflow interrupt occurs.
*/
-extern void ll_timer_interrupt(int irq);
+extern void perf_counter_install_handler(int (*handler)(void));
-/*
- * profiling and process accouting is done separately in local_timer_interrupt
- */
-extern void local_timer_interrupt(int irq);
+extern unsigned calibrate_timer(cycle_t (*x_read)(void),
+ int (*y_state)(void));
-/*
- * board specific routines required by time_init().
- */
-struct irqaction;
-extern void plat_time_init(void);
-extern void plat_timer_setup(struct irqaction *irq);
+#ifdef CONFIG_CP0_TIMER
-/*
- * mips_hpt_frequency - must be set if you intend to use an R4k-compatible
- * counter as a timer interrupt source; otherwise it can be set up
- * automagically with an aid of mips_timer_state.
- */
-extern unsigned int mips_hpt_frequency;
+struct cp0_timer_info {
+ /*
+ * IRQ num of the cp0 count/compare timer.
+ */
+ int irq;
+
+ /*
+ * This mandartory hook is called to get the frequency of
+ * the running processor.
+ */
+ unsigned (*get_freq)(int cpu);
+};
+
+extern int setup_cp0_timer(struct cp0_timer_info *info);
+extern void setup_cp0_clockevent(void);
+
+#else
+
+static inline void setup_cp0_clockevent(void) {}
+
+#endif /* CONFIG_CP0_TIMER */
#endif /* _ASM_TIME_H */
--
1.5.2.2
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic