[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-mips
Subject: Re: USB on AU1550
From: Matej Kupljen <matej.kupljen () ultra ! si>
Date: 2005-09-29 9:07:11
Message-ID: 1127984831.10179.6.camel () localhost ! localdomain
[Download RAW message or body]
Hi
> I'm trying to get USB working on my AU1550 board, and I'm getting an error I
> don't understand. I've searched the web and the mailing list archives, but
> haven't found anything relevant.
Not the answer to you question, but I have some problems with USB on
AU1200 board too. I use AirStar2 USB card (this is DVB-T card) and it
is recognized by AU1200 and can communicate with it. I can tune to
transporder, but the data (transport stream) is not send from the
USB card.
The card conforms to USB 1.1.
I tried it on a PC running Linux and it works fine.
AU1200 kernel: 2.6.11, PC kernel: 2.6.13.2.
Any thoughts?
BR,
Matej
P.S.: This is the log:
----------------------------------------------------------------------------------
flexcop_usb: running at FULL speed.
DVB: registering new adapter (FlexCop Digital TV device).
f010
b2c2-flexcop: MAC address = <DELETED>
b2c2-flexcop: found the mt352 at i2c address: 0x0f
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'USB'
bus controlled by a 'FlexCopIII' complete
creating 4 iso-urbs with 4 frames each of 1023 bytes size = 16368.
initializing and submitting urb no. 0 (buf_offset: 0).
urb no: 0, frame: 0, frame_offset: 0
urb no: 0, frame: 1, frame_offset: 1023
urb no: 0, frame: 2, frame_offset: 2046
urb no: 0, frame: 3, frame_offset: 3069
submitted urb no. 0.
initializing and submitting urb no. 1 (buf_offset: 4092).
urb no: 1, frame: 0, frame_offset: 0
urb no: 1, frame: 1, frame_offset: 1023
urb no: 1, frame: 2, frame_offset: 2046
urb no: 1, frame: 3, frame_offset: 3069
submitted urb no. 1.
initializing and submitting urb no. 2 (buf_offset: 8184).
urb no: 2, frame: 0, frame_offset: 0
urb no: 2, frame: 1, frame_offset: 1023
urb no: 2, frame: 2, frame_offset: 2046
urb no: 2, frame: 3, frame_offset: 3069
submitted urb no. 2.
initializing and submitting urb no. 3 (buf_offset: 12276).
urb no: 3, frame: 0, frame_offset: 0
urb no: 3, frame: 1, frame_offset: 1023
urb no: 3, frame: 2, frame_offset: 2046
urb no: 3, frame: 3, frame_offset: 3069
submitted urb no. 3.
flexcop_usb: Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver
successfully initialized and connected.
usbcore: registered new driver b2c2_flexcop_usb
----------------------------------------------------------------------------------
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic