[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-megaraid-devel
Subject: Re: low performance on PERC cards
From: Dimitris <sehh () altered ! com>
Date: 2003-02-15 11:14:23
[Download RAW message or body]
On Fri, 14 Feb 2003 21:16:58 -0500 Ryan Crace <rfcrace@yahoo.com> wrote:
> Disk Read: ~55MB/sec
> Disk Read: ~70MB/sec
both results are VERY low. for example 4 raid0 drives should easily reach 140mb/s, as
i've seen an Elite 1600 run on a Tyan dual athlon board.
> I'm currently running on a dual Xeon (Dell 2650 w/ 2 2.8GHz CPUs) system so
> I can assure you the problems exist there as well...at least with the QC
I see, then my initial suspision that the problem could be related to AMD is not \
true.
Atleast the problem is definetly related with PERC cards, since the original LSI ones \
work fine.
I won't flash the LSI bios unless i hear from someone who has already done it, 20mb/s \
writes is better than 0mb/s ;)
_______________________________________________
Linux-megaraid-devel mailing list
Linux-megaraid-devel@dell.com
http://lists.us.dell.com/mailman/listinfo/linux-megaraid-devel
Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at \
http://lists.us.dell.com/htdig/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic