[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-media
Subject: Re: [PATCH 2/5] dt-bindings: media: Add bindings for ARM mali-c55
From: Rob Herring <robh () kernel ! org>
Date: 2024-01-31 18:28:31
Message-ID: 170672571070.2062253.5359379478215022864.robh () kernel ! org
[Download RAW message or body]
On Wed, 31 Jan 2024 16:47:06 +0000, Daniel Scally wrote:
> Add the yaml binding for ARM's Mali-C55 Image Signal Processor.
>
> Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
> ---
> .../bindings/media/arm,mali-c55.yaml | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/arm,mali-c55.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/arm,mali-c55.example.dts:29.18-33.13: Warning \
(unit_address_vs_reg): /example-0/isp@400000/port@0: node has a unit name, but no reg \
or ranges property Documentation/devicetree/bindings/media/arm,mali-c55.example.dts:30.32-32.15: \
Warning (unit_address_vs_reg): /example-0/isp@400000/port@0/endpoint@0: node has a \
unit name, but no reg or ranges property
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/arm,mali-c55.example.dtb: \
isp@400000: 'port' is a required property from schema $id: \
http://devicetree.org/schemas/media/arm,mali-c55.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/arm,mali-c55.example.dtb: \
isp@400000: 'port@0' does not match any of the regexes: 'pinctrl-[0-9]+' from schema \
$id: http://devicetree.org/schemas/media/arm,mali-c55.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240131164709.810587-3-dan.scally@ideasonboard.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic