[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-mac68k
Subject: RE: Helping out
From: "Drew Whittle" <drew () lug ! net ! nz>
Date: 2001-06-15 1:02:25
[Download RAW message or body]
The dumb terminal is just that a Digital VT510, works great for everything
but this pb150.
I have been trying to avoid using the Mac's as the other end of the link for
various reasons but I guess I could give it ago, if I can find a mac<->mac
serial cable.
The method you describe below is what I have been doing using the PB150, so
I at least have that bit right.
What wrong with the pb150? hmm whats right with it? It was a general comment
meaning that the pb150 is not a usable machine wrt linux at this stage. (I'd
love to be proved wrong!)
:D
>
> What are you using as your dumb terminal? The easiest way to do it is to
> use another Mac, since any standard Mac serial cable will work to connect
> the two of them. The 7200 should do nicely. Just hook the cable between
> the modem ports of the computers, and download ZTerm or some other free
> terminal utility on the 7200. Set "debug=ser" in the command line on the
> 150. In Penguin 19, select the serial ports to be at 9600 bps, 8N1. set
> the same settings on the 7200. Then, all messages should be redirected to
> the 7200.
>
> More info on what is wrong with the 150 would be very helpful.
>
--
Send e-mail to 'linux-mac68k-request@mac.linux-m68k.org' with 'unsubscribe'
in the message body to unsubscribe from this list.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic