[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-lvm
Subject: Re: [linux-lvm] using LVM with SAN
From: Luca Berra <bluca () comedia ! it>
Date: 2006-09-21 19:09:54
Message-ID: 20060921190954.GB7301 () percy ! comedia ! it
[Download RAW message or body]
On Wed, Sep 20, 2006 at 05:08:53PM +0200, de Toma Alessandro wrote:
>Dear All,
>we have create a vg on a LINUX RH ES4 UP2.
>The storage is a CX500 and the multypath software is POWERPATH 4.5.
>
>During the creation of VG we are this worning:
># vgcreate VolGroupSUN01 /dev/emcpowerb1
>Found duplicate PV fPxLqOcxkEO2Umku09icOn5oJ1IC5H84: using /dev/sdc1 not
>/dev/emcpowera1
....
>Volume group "VolGroupSUN01" successfully created
>This is correct?
no, please edit /etc/lvm/lvm.conf and set up filters so lvm will only
use /dev/emcpower* devices.
note that if your root vg is on local scsi disks you will have to add
those to the filter as well.
eg:
filter =[ "a|/dev/sda[1-9]*|", "a|/dev/sdb[1-9]*|", "a|/dev/emcpower.*|", "r|.*|" ]
>When we umount the volume:
>[root@mezzicluslin02 ~]# umount /dev/VolGroupSUN00/LogVolSUN00
>/home/SUNstorage
>umount: /dev/mapper/VolGroupSUN00-LogVolSUN00: not mounted
>umount: /dev/mapper/VolGroupSUN00-LogVolSUN00: not mounted
>
>This is correct?
no, umount takes only 1 parameter, either the device or the mount point.
L.
--
Luca Berra -- bluca@comedia.it
Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
X AGAINST HTML MAIL
/ \
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic