[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-kernel
Subject: Re: U2W SCSI problems
From: Doug Ledford <dledford () redhat ! com>
Date: 1999-11-30 21:17:41
[Download RAW message or body]
Turbo Fredriksson wrote:
> This is the output when booting with the verbose and panic_on_abort
> kernel options:
>
> -----
> Partition check:
> sda: sda1 sda2 < sda5 sda6 >
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
> hdc:<4>(scsi1:-1:-1:-1) Data Parity Error during PCI address or PCI write phase.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Try moving the card to a different PCI slot. This is usually associated with
a bad or poorly designed (aka, out of spec) PCI slot.
--
Doug Ledford <dledford@redhat.com>
Opinions expressed are my own, but
they should be everybody's.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic