[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-kernel
Subject: [PATCH net-next] net: dsa: Do not configure VLAN ID 0
From: Florian Fainelli <f.fainelli () gmail ! com>
Date: 2019-02-28 23:49:36
Message-ID: 20190228234936.1593-1-f.fainelli () gmail ! com
[Download RAW message or body]
Because we skip the prepare phase, we would not get a chance to have the
port_vlan_prepare() callback return -EOPNOTSUPP and tell us about that.
This causes problems with mv88e6xxx which specifically checks for VLAN
ID = 0. Turns out we do not actually need to program that VLAN ID since
it should be the default one for switches anyway.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
net/dsa/slave.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 1808a2cd6872..ec54d579645a 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -996,6 +996,9 @@ static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
struct bridge_vlan_info info;
int ret;
+ if (vid == 0)
+ return 0;
+
/* Check for a possible bridge VLAN entry now since there is no
* need to emulate the switchdev prepare + commit phase.
*/
@@ -1029,6 +1032,9 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
struct bridge_vlan_info info;
int ret;
+ if (vid == 0)
+ return 0;
+
/* Check for a possible bridge VLAN entry now since there is no
* need to emulate the switchdev prepare + commit phase.
*/
--
2.17.1
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic