[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-kernel
Subject:    Re: [PATCH 1/2] dt-bindings: reset: Add document for Broadcom STB reset controller
From:       Scott Branden <scott.branden () broadcom ! com>
Date:       2018-12-31 23:13:25
Message-ID: 67d797f6-fc3a-535c-d336-edcdc70c332e () broadcom ! com
[Download RAW message or body]


On 2018-12-20 5:34 p.m., Florian Fainelli wrote:
> Add a binding document for the Broadcom STB reset controller, also known
> as SW_INIT-style reset controller.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> .../devicetree/bindings/reset/brcm,reset.txt  | 27 +++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/brcm,reset.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/brcm,reset.txt \
> b/Documentation/devicetree/bindings/reset/brcm,reset.txt new file mode 100644
> index 000000000000..6e5341b4f891
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/brcm,reset.txt
This is brcmstb-reset specific.   File should be brcm, brcmstb-reset.txt
> @@ -0,0 +1,27 @@
> +Broadcom STB SW_INIT-style reset controller
> +===========================================
> +
> +Broadcom STB SoCs have a SW_INIT-style reset controller with separate
> +SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
> +reset lines.
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: should be brcm,brcmstb-reset
> +- reg: register base and length
> +- #reset-cells: must be set to 1
> +
> +Example:
> +
> +	reset: reset-controller@8404318 {
> +		compatible = "brcm,brcmstb-reset";
> +		reg = <0x8404318 0x30>;
> +		#reset-cells = <1>;
> +	};
> +
> +	&ethernet_switch {
> +		resets = <&reset>;
> +		reset-names = "switch";
> +	};


[prev in list] [next in list] [prev in thread] [next in thread]