[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-kernel
Subject:    Re: Western Digital GreenPower drives and Linux
From:       devzero () web ! de
Date:       2008-04-10 22:36:45
Message-ID: 234148243 () web ! de
[Download RAW message or body]

i also have such a drive (damn, if i knew that saving some Watts would hurt...) - and \
i measured ~100 load_cycle_count per hour, which is _way_ to much, imho. if we trust \
the spec, the disk would be dead after ~1year.

it seems that "intellipark" is not that intelligent as it should be and a little bit \
too agressive.

from what i have found, the time for parking the heads is much below the linux kernel \
flush interval (which seems to be at 30secs),  so i think the best thing to do is \
tuning either dirty_expire_centisecs and dirty_writeback_centisecs  (defaults to \
3000/500 on my system)  or tune the disk parking interval , so that the disks own \
interval is greater than the linux flush interval.

i also openend an SR at WD - will see if they will recommend that dos utility, too.

> I got back from WD's tech support and received a DOS utility which can control 
> this drive feature, apparently using vendor specific commands. With it head 
> unload timer can be disabled or set to a period between 100ms and 25.5s. 

doh - so that disk always is faster with parking it`s heads than linux default flush \
interval !? btw - is that dos utility available for download somewhere?

regards
roland



List:       linux-kernel
Subject:    Re: Western Digital GreenPower drives and Linux
From:       "Tvrtko A. Ursulin" <tvrtko () ursulin ! net>
Date:       2008-04-10 7:48:08
Message-ID: 200804100848.08442.tvrtko () ursulin ! net
[Download message RAW]

On Wednesday 09 April 2008 21:18:35 Tvrtko A. Ursulin wrote:
> I got one of them (WD5000AACS) recently and to my horror after less than
> three days of being power on this is what I saw:
> 
> 9 Power_On_Hours       0x0032 100 100 000 Old_age Always  - 66
> 193 Load_Cycle_Count 0x0032 197 197 000 Old_age  Always  - 10233
> 
> At this rate the disk would reach it's design limit for load/unload cycles
> in around 80 days. Not good - so I implemented a lame workaround of keeping
> disk busy every couple of seconds - hopefully that won't kill it sooner
> that unloads would..
> 
> I am also currently talking with first line of WD's tech support trying to
> get some data on how exactly those drives manage head unloading, but that
> may not lead anywhere useful.

I got back from WD's tech support and received a DOS utility which can control 
this drive feature, apparently using vendor specific commands. With it head 
unload timer can be disabled or set to a period between 100ms and 25.5s. 

Of course I asked for more than a DOS utility, but the question really is how 
was this feature intended to work with Windows for example, is there 
something there which would prevent such rapid load/unload cycle growth, and 
why isn't it documented somewhere?

I am kind off hoping that someone from WD is reading this list and will notice 
this in case my effort with tech support fails.

Tvrtko
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! 
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic