[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-kernel
Subject: IDE/ACPI related hibernation regression: Second attempt fails
From: Mikko Vinni <mmvinni () yahoo ! com>
Date: 2007-12-31 21:27:50
Message-ID: 90645.12978.qm () web58415 ! mail ! re3 ! yahoo ! com
[Download RAW message or body]
Hi,
I noticed my ancient laptop (HP nx9005) fails to hibernate (suspend to disk) more \
than once while running recent 2.6.24-rc kernels. First hibernation succeeds happily, \
but when I try to do it again after resuming, the machine hangs immediately after the \
familiar two pops from the speakers."Hanging" in this case means that none of the \
usual keys work (e.g. Caps Lock led doesn't toggle), but alt-sysrq-b does reboot the \
laptop.
I tried my skills at bisecting and found that reverting the following patch allows my \
laptop to hibernate two (and probably more) times in a row successfully, both in X \
and from console:
commit 5e32132befa5d2cefadf3141fee0bbb40cd11f0e
Author: Shaohua Li <shaohua.li@intel.com>
Date: Thu Oct 11 23:53:58 2007 +0200
ide: hook ACPI _PSx method to IDE power on/off
ACPI spec defines the sequence of IDE power on/off:
Powering down:
Call _GTM.
Power down drive (calls _PS3 method and turns off power planes).
Powering up:
Power up drive (calls _PS0 method if present and turns on power planes).
Call _STM passing info from _GTM (possibly modified), with ID data from
each drive.
Initialize the channel.
May modify the results of _GTF.
For each drive:
Call _GTF.
Execute task file (possibly modified).
This patch adds the missed _PS0/_PS3 methods call.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Here is the dmesg of the failing kernel after the first hibernation. I have no output \
from the second hibernation attempt with that kernel. After reverting the \
above-mentioned commit, these two lines won't appear in the output anymore:
ACPI: Cannot set device to a higher-powered state than parent
ACPI: Cannot set device to a higher-powered state than parent
Dmesg of the failing kernel after first hibernation (version is untouched \
e697789d64f8748cb219d7f5c413c512953802cc, i.e. current 2.6.24-rc6):
[ 0.000000] Linux version 2.6.24-rcx-qaz (mikko@ubuntu) (gcc version 4.1.3 \
20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Mon Dec 31 19:26:59 EET 2007 [ \
0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 \
- 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - \
00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - \
0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - \
000000001def0000 (usable) [ 0.000000] BIOS-e820: 000000001def0000 - \
000000001deff000 (ACPI data) [ 0.000000] BIOS-e820: 000000001deff000 - \
000000001df00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001df00000 - \
000000001e000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - \
0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 478MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 122608) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 122608
[ 0.000000] HighMem 122608 -> 122608
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 122608
[ 0.000000] On node 0 totalpages: 122608
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 925 pages used for memmap
[ 0.000000] Normal zone: 117587 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F7290, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1DEF8B70, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1DEFEE2B, 0074 (r1 ATI Raptor 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 1DEF8BA0, 628B (r1 ATI U1_M1535 6040000 MSFT 100000D)
[ 0.000000] ACPI: FACS 1DEFFFC0, 0040
[ 0.000000] ACPI: BOOT 1DEFEE9F, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 1DEFEEC7, 0139 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e1fc0000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - \
00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: \
00000000000a0000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory \
region: 00000000000d0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone \
order, mobility grouping on. Total pages: 121651 [ 0.000000] Kernel command line: \
root=UUID=ce8db9f7-6377-48a5-b22e-0a86e05348d6 ro single noresume2 [ 0.000000] \
Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped \
APIC to ffffb000 (013c3000) [ 0.000000] Enabling fast FPU save and restore... \
done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c03c0000 soft=c03bf000
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1656.374 MHz processor.
[ 12.790717] Console: colour VGA+ 80x25
[ 12.790723] console [tty0] enabled
[ 12.793297] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.793765] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.814936] Memory: 476272k/490432k available (1813k kernel code, 13516k reserved, \
665k data, 316k init, 0k highmem) [ 12.815009] virtual kernel memory layout:
[ 12.815010] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
[ 12.815012] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.815013] vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB)
[ 12.815015] lowmem : 0xc0000000 - 0xddef0000 ( 478 MB)
[ 12.815016] .init : 0xc036d000 - 0xc03bc000 ( 316 kB)
[ 12.815018] .data : 0xc02c5770 - 0xc036bce4 ( 665 kB)
[ 12.815019] .text : 0xc0100000 - 0xc02c5770 (1813 kB)
[ 12.815383] Checking if this processor honours the WP bit even in supervisor \
mode... Ok. [ 12.898920] Calibrating delay using timer specific routine.. 3315.82 \
BogoMIPS (lpj=5522913) [ 12.899060] Security Framework initialized
[ 12.899119] Capability LSM initialized
[ 12.899178] Mount-cache hash table entries: 512
[ 12.899420] CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 \
00000000 00000000 00000000 00000000 [ 12.899432] CPU: L1 I Cache: 64K (64 \
bytes/line), D cache 64K (64 bytes/line) [ 12.899483] CPU: L2 Cache: 256K (64 \
bytes/line) [ 12.899530] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 \
00000420 00000000 00000000 00000000 00000000 [ 12.899537] Intel machine check \
architecture supported. [ 12.899585] Intel machine check reporting enabled on \
CPU#0. [ 12.899637] Compat vDSO mapped to ffffe000.
[ 12.899695] CPU: AMD mobile AMD Athlon(tm) XP2000+ stepping 01
[ 12.899840] Checking 'hlt' instruction... OK.
[ 12.912613] Freeing SMP alternatives: 0k freed
[ 12.912660] ACPI: Core revision 20070126
[ 12.915264] ACPI: setting ELCR to 0200 (from 0e28)
[ 12.917607] net_namespace: 64 bytes
[ 12.918235] Time: 20:32:02 Date: 12/31/07
[ 12.918340] NET: Registered protocol family 16
[ 12.918665] EISA bus registered
[ 12.918725] ACPI: bus type pci registered
[ 12.931113] PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=3
[ 12.931164] PCI: Using configuration type 1
[ 12.931209] Setting up standard PCI resources
[ 12.933490] ACPI: EC: Look up EC in DSDT
[ 12.960844] ACPI: Interpreter enabled
[ 12.960899] ACPI: (supports S0 S3 S4 S5)
[ 12.961082] ACPI: Using PIC for interrupt routing
[ 12.967151] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 12.967213] ACPI: EC: driver started in poll mode
[ 12.967518] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 12.967844] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.968323] PCI quirk: region 8000-803f claimed by ali7101 ACPI
[ 12.968374] PCI quirk: region 8040-805f claimed by ali7101 SMB
[ 12.968672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.968754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 12.971015] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
[ 12.971400] ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
[ 12.971713] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 10) *9
[ 12.972117] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 10) *0, disabled.
[ 12.972566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10) *0, disabled.
[ 12.973002] ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *10
[ 12.973344] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10)
[ 12.973716] ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
[ 12.974027] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10) *9
[ 12.974444] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.974537] pnp: PnP ACPI init
[ 12.974596] ACPI: bus type pnp registered
[ 12.979367] pnp: PnP ACPI: found 11 devices
[ 12.979419] ACPI: ACPI bus type pnp unregistered
[ 12.979469] PnPBIOS: Disabled by ACPI PNP
[ 12.979792] PCI: Using ACPI for IRQ routing
[ 12.979842] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post \
a report [ 12.992232] NET: Registered protocol family 8
[ 12.992280] NET: Registered protocol family 20
[ 12.995550] Time: tsc clocksource has been installed.
[ 13.002265] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 13.002316] system 00:07: ioport range 0x480-0x48f has been reserved
[ 13.002367] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 13.002416] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 13.002467] system 00:07: ioport range 0x8000-0x807f could not be reserved
[ 13.002518] system 00:07: ioport range 0xff00-0xff01 has been reserved
[ 13.002570] system 00:07: ioport range 0x8004-0x8005 has been reserved
[ 13.002620] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 13.002671] system 00:07: iomem range 0xd0400000-0xd0400fff has been reserved
[ 13.033224] PCI: Bridge: 0000:00:01.0
[ 13.033271] IO window: 9000-9fff
[ 13.033317] MEM window: e0100000-e01fffff
[ 13.033364] PREFETCH window: e8000000-efffffff
[ 13.033413] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[ 13.033459] IO window: 00001000-000010ff
[ 13.033507] IO window: 00001400-000014ff
[ 13.033553] PREFETCH window: 20000000-23ffffff
[ 13.033600] MEM window: 24000000-27ffffff
[ 13.033646] PCI: Bus 6, cardbus bridge: 0000:00:0a.1
[ 13.033692] IO window: 00001800-000018ff
[ 13.033738] IO window: 00001c00-00001cff
[ 13.033784] PREFETCH window: 28000000-2bffffff
[ 13.033831] MEM window: 2c000000-2fffffff
[ 13.034171] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 13.034222] PCI: setting IRQ 11 as level-triggered
[ 13.034226] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 11 (level, \
low) -> IRQ 11 [ 13.034357] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKF] -> \
GSI 11 (level, low) -> IRQ 11 [ 13.034504] NET: Registered protocol family 2
[ 13.065623] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 13.065988] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 13.066384] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 13.066602] TCP: Hash tables configured (established 16384 bind 16384)
[ 13.066652] TCP reno registered
[ 13.075740] checking if image is initramfs... it is
[ 13.535380] Switched to high resolution mode on CPU 0
[ 13.729911] Freeing initrd memory: 6045k freed
[ 13.730218] Simple Boot Flag at 0x36 set to 0x1
[ 13.730869] audit: initializing netlink socket (disabled)
[ 13.730940] audit(1199133122.896:1): initialized
[ 13.731217] VFS: Disk quotas dquot_6.5.1
[ 13.731297] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.731459] io scheduler noop registered
[ 13.731505] io scheduler anticipatory registered
[ 13.731551] io scheduler deadline registered
[ 13.731605] io scheduler cfq registered (default)
[ 13.731665] ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
[ 13.945282] Activating ISA DMA hang workarounds.
[ 13.945345] Boot video device is 0000:01:05.0
[ 13.945615] isapnp: Scanning for PnP cards...
[ 14.214704] isapnp: No Plug & Play device found
[ 14.246069] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing \
enabled [ 14.246308] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.247393] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.248002] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
[ 14.248055] PCI: setting IRQ 3 as level-triggered
[ 14.248059] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI 3 (level, \
low) -> IRQ 3 [ 14.248186] ACPI: PCI interrupt for device 0000:00:08.0 disabled
[ 14.249078] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.249254] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 14.252877] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.252933] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 14.253168] mice: PS/2 mouse device common for all mice
[ 14.253394] EISA: Probing bus 0 at eisa.0
[ 14.253450] Cannot allocate resource for EISA slot 1
[ 14.253523] Cannot allocate resource for EISA slot 8
[ 14.253569] EISA: Detected 0 cards.
[ 14.254479] cpuidle: using governor ladder
[ 14.254525] cpuidle: using governor menu
[ 14.254688] TCP cubic registered
[ 14.254738] NET: Registered protocol family 1
[ 14.254831] Using IPI Shortcut mode
[ 14.255027] Magic number: 3:966:549
[ 14.255515] hash matches device PNP0C0F:00
[ 14.256221] Freeing unused kernel memory: 316k freed
[ 14.295229] input: AT Translated Set 2 keyboard as /class/input/input0
[ 14.607022] fuse init (API version 7.9)
[ 14.622151] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 14.625915] Marking TSC unstable due to: TSC halts in idle.
[ 14.626851] ACPI: Thermal Zone [THRM] (54 C)
[ 14.628417] Time: acpi_pm clocksource has been installed.
[ 15.960396] usbcore: registered new interface driver usbfs
[ 15.960499] usbcore: registered new interface driver hub
[ 15.971352] usbcore: registered new device driver usb
[ 15.972831] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.973238] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
[ 15.973297] PCI: setting IRQ 10 as level-triggered
[ 15.973301] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 10 (level, \
low) -> IRQ 10 [ 15.973440] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 15.973841] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 15.973924] ohci_hcd 0000:00:02.0: irq 10, io mem 0xe0004000
[ 16.026968] usb usb1: configuration #1 chosen from 1 choice
[ 16.027064] hub 1-0:1.0: USB hub found
[ 16.027130] hub 1-0:1.0: 4 ports detected
[ 16.038956] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 16.039026] ide: Assuming 33MHz system bus speed for PIO modes; override with \
idebus=xx [ 16.049775] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 16.049780] originally by Donald Becker <becker@scyld.com>
[ 16.049782] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 16.128366] alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.
[ 16.128434] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc4) at PCI slot \
0000:00:10.0 [ 16.128527] ACPI: Unable to derive IRQ for device 0000:00:10.0
[ 16.128576] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
[ 16.128665] ALI15X3: not 100% native mode: will probe irqs later
[ 16.128733] ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
[ 16.128873] ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:DMA, hdd:pio
[ 16.129003] Probing IDE interface ide0...
[ 16.214901] Floppy drive(s): fd0 is 1.44M
[ 16.231524] FDC 0 is a post-1991 82077
[ 16.407936] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 16.628610] usb 1-1: configuration #1 chosen from 1 choice
[ 16.645156] usbcore: registered new interface driver hiddev
[ 16.662871] input: Logitech USB Receiver as /class/input/input1
[ 16.671226] input: USB HID v1.10 Mouse [Logitech USB Receiver] on \
usb-0000:00:02.0-1 [ 16.671373] usbcore: registered new interface driver usbhid
[ 16.671425] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 17.044607] hda: ST94813A, ATA DISK drive
[ 17.044752] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 17.044940] hda: UDMA/100 mode selected
[ 17.045282] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 17.047288] Probing IDE interface ide1...
[ 18.067659] hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
[ 18.067871] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 18.067942] hdc: UDMA/33 mode selected
[ 18.068096] ide1 at 0x170-0x177,0x376 on irq 15
[ 18.079994] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 18.080059] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 11 (level, \
low) -> IRQ 11 [ 18.082165] natsemi eth0: NatSemi DP8381[56] at 0xe0008000 \
(0000:00:12.0), 00:0d:9d:5b:58:5f, IRQ 11, port TP. [ 18.082484] ACPI: PCI \
Interrupt Link [LNKC] enabled at IRQ 10 [ 18.082534] ACPI: PCI Interrupt \
0000:00:0c.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 18.134030] SCSI \
subsystem initialized [ 18.145045] libata version 3.00 loaded.
[ 18.150115] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] \
MMIO=[e0007000-e00077ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 18.165577] hda: \
max request size: 128KiB [ 18.170967] hda: 78140160 sectors (40007 MB) w/8192KiB \
Cache, CHS=16383/255/63 [ 18.171704] hda: cache flushes supported
[ 18.171824] hda: hda1 hda2 hda3 < hda5 hda6 > hda4
[ 18.227469] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 18.227695] Uniform CD-ROM driver Revision: 3.20
[ 18.567218] Attempting manual resume
[ 18.567270] swsusp: Resume From Partition 3:5
[ 18.567273] PM: Checking swsusp image.
[ 18.567676] PM: Resume from disk failed.
[ 18.605851] kjournald starting. Commit interval 5 seconds
[ 18.605938] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.417040] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d9d719e5a29c3]
[ 31.534698] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.605742] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 32.440214] eth0: DSPCFG accepted after 0 usec.
[ 32.440288] eth0: link up.
[ 34.197014] NET: Registered protocol family 17
[ 34.947635] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.989067] Linux agpgart interface v0.102
[ 35.064009] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.081289] input: Power Button (FF) as /class/input/input2
[ 35.098841] ACPI: Power Button (FF) [PWRF]
[ 35.099065] input: Power Button (CM) as /class/input/input3
[ 35.107222] agpgart: Detected Ati IGP320/M chipset
[ 35.117161] agpgart: AGP aperture is 64M @ 0xe4000000
[ 35.128772] ACPI: Power Button (CM) [PWRB]
[ 35.128926] input: Lid Switch as /class/input/input4
[ 35.140674] ACPI: Lid Switch [LID]
[ 35.153860] ACPI: AC Adapter [ACAD] (on-line)
[ 35.157323] ACPI: Battery Slot [BAT1] (battery present)
[ 35.317781] input: Video Bus as /class/input/input5
[ 35.345513] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 36.067032] Yenta: CardBus bridge found at 0000:00:0a.0 [6933:0002]
[ 36.067111] Yenta O2: res at 0x94/0xD4: ea/00
[ 36.067158] Yenta O2: enabling read prefetch/write burst
[ 36.192276] Yenta: ISA IRQ mask 0x00b8, PCI irq 11
[ 36.192340] Socket status: 30000006
[ 36.202384] Yenta: CardBus bridge found at 0000:00:0a.1 [6933:0002]
[ 36.328954] Yenta: ISA IRQ mask 0x00b8, PCI irq 11
[ 36.329015] Socket status: 30000006
[ 36.362355] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
[ 36.362419] PCI: setting IRQ 5 as level-triggered
[ 36.362423] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 5 (level, \
low) -> IRQ 5 [ 36.419684] input: PC Speaker as /class/input/input6
[ 36.512837] Real Time Clock Driver v1.12ac
[ 37.234319] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: \
0x904713/0x10008 [ 37.269679] input: SynPS/2 Synaptics TouchPad as \
/class/input/input7 [ 37.294372] parport_pc 00:09: reported by Plug and Play ACPI
[ 37.294505] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 \
[PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 37.720771] cs: IO port probe 0x100-0x4ff: \
excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 37.724018] cs: IO port \
probe 0xc00-0xcf7: clean. [ 37.725092] cs: IO port probe 0xa00-0xaff: clean.
[ 37.728617] cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f \
0x330-0x337 0x388-0x38f [ 37.731882] cs: IO port probe 0xc00-0xcf7: clean.
[ 37.732934] cs: IO port probe 0xa00-0xaff: clean.
[ 38.794385] AC'97 1 does not respond - RESET
[ 38.807709] AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 38.807763] ali mixer 1 creating error.
[ 38.810948] ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade \
BIOS or use force_addr=0xaddr [ 38.811063] ali15x3_smbus 0000:00:11.0: ALI15X3 not \
detected, module not inserted. [ 39.309807] lp0: using parport0 (interrupt-driven).
[ 39.566441] Adding 979924k swap on /dev/hda5. Priority:-1 extents:1 \
across:979924k [ 39.939091] EXT3 FS on hda2, internal journal
[ 41.235791] kjournald starting. Commit interval 5 seconds
[ 41.236209] EXT3 FS on hda4, internal journal
[ 41.236216] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.335552] SGI XFS with ACLs, security attributes, realtime, large block numbers, \
no debug enabled [ 41.345498] SGI XFS Quota Management subsystem
[ 41.422488] XFS mounting filesystem hda6
[ 41.572821] Ending clean XFS mount for filesystem: hda6
[ 42.805014] NET: Registered protocol family 10
[ 42.805364] lo: Disabled Privacy Extensions
[ 53.579691] eth0: no IPv6 routers present
[ 90.958358] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 90.958369] swsusp: Basic memory bitmaps created
[ 90.958372] Syncing filesystems ... done.
[ 90.990172] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 90.990256] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 90.990305] Shrinking memory... -done (0 pages freed)
[ 91.012095] Freed 0 kbytes in 0.02 seconds (0.00 MB/s)
[ 91.012099] Suspending console(s)
[ 91.012358] ACPI: Cannot set device to a higher-powered state than parent
[ 91.232564] ACPI: Cannot set device to a higher-powered state than parent
[ 91.233219] serial 00:0a: disabled
[ 91.233582] parport_pc 00:09: disabled
[ 91.233840] eth0: remaining active for wake-on-lan
[ 91.273011] ACPI: PCI interrupt for device 0000:00:06.0 disabled
[ 91.286237] ACPI: PCI interrupt for device 0000:00:02.0 disabled
[ 91.304106] swsusp: critical section:
[ 91.325801] swsusp: Need to copy 24476 pages
[ 91.325808] swsusp: Normal pages needed: 24476 + 1024 + 14, available pages: 98033
[ 20.971916] Intel machine check architecture supported.
[ 20.971929] Intel machine check reporting enabled on CPU#0.
[ 20.981930] PM: Writing back config space on device 0000:00:00.0 at offset 1 (was \
22300006, writing 2300006) [ 20.994383] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link \
[LNKU] -> GSI 10 (level, low) -> IRQ 10 [ 21.007714] PM: Writing back config space \
on device 0000:00:06.0 at offset 1 (was c2900007, writing c2900003) [ 21.007728] \
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5 [ \
21.287670] PM: Writing back config space on device 0000:00:0a.0 at offset f (was \
180010a, writing 580010a) [ 21.287684] PM: Writing back config space on device \
0000:00:0a.0 at offset 3 (was 824000, writing 82a800) [ 21.287690] PM: Writing back \
config space on device 0000:00:0a.0 at offset 1 (was 4100007, writing 4100087) [ \
21.287704] Yenta O2: res at 0x94/0xD4: ea/00 [ 21.287707] Yenta O2: enabling read \
prefetch/write burst [ 21.424264] PM: Writing back config space on device \
0000:00:0a.1 at offset f (was 180020a, writing 580020a) [ 21.424278] PM: Writing \
back config space on device 0000:00:0a.1 at offset 3 (was 824000, writing 82a800) [ \
21.424284] PM: Writing back config space on device 0000:00:0a.1 at offset 1 (was \
4100007, writing 4100087) [ 21.574223] PM: Writing back config space on device \
0000:00:0c.0 at offset f (was 4020100, writing 4020109) [ 21.574236] PM: Writing \
back config space on device 0000:00:0c.0 at offset 5 (was 0, writing e0000000) [ \
21.574241] PM: Writing back config space on device 0000:00:0c.0 at offset 4 (was 0, \
writing e0007000) [ 21.574245] PM: Writing back config space on device 0000:00:0c.0 \
at offset 3 (was 0, writing 4010) [ 21.574251] PM: Writing back config space on \
device 0000:00:0c.0 at offset 1 (was 2100000, writing 2100016) [ 21.624275] \
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e0007000-e00077ff] Max \
Packet=[2048] IR/IT contexts=[4/8] [ 21.624410] ACPI: Unable to derive IRQ for \
device 0000:00:10.0 [ 21.624413] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
[ 21.624498] eth0: DSPCFG accepted after 0 usec.
[ 21.626171] parport_pc 00:09: activated
[ 21.627184] serial 00:0a: activated
[ 22.342708] usb usb1: root hub lost power or was reset
[ 22.460074] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 22.460431] hda: UDMA/100 mode selected
[ 22.463457] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 22.474519] hdc: UDMA/33 mode selected
[ 22.474625] PM: Image restored successfully.
[ 22.484664] Restarting tasks ... <6>usb 1-1: USB disconnect, address 2
[ 22.487883] done.
[ 22.487920] swsusp: Basic memory bitmaps freed
[ 22.787241] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 23.011521] usb 1-1: configuration #1 chosen from 1 choice
[ 23.034839] input: Logitech USB Receiver as /class/input/input8
[ 23.060634] input: USB HID v1.10 Mouse [Logitech USB Receiver] on \
usb-0000:00:02.0-1
lspci -vvv:
00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 32
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at e0400000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at 8090 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ \
AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01) (prog-if 00 \
[Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- \
Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium \
>TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e0100000-e01fffff
Prefetchable memory behind bridge: e8000000-efffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- \
<MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 \
[OHCI]) Subsystem: Hewlett-Packard Company Pavilion ze4400 builtin USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller \
Audio Device (rev 02) Subsystem: Hewlett-Packard Company Pavilion ze4400 builtin \
Audio Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR+ <PERR+ Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 8400 [size=256]
Region 1: Memory at e0005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+]
Subsystem: ALi Corporation ALi M1533 Aladdin IV/V ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company Pavilion ze4400 builtin Modem Device
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 3
Region 0: Memory at e0006000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 8800 [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller \
(rev 01) Subsystem: Unknown device 6933:0002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ \
SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 30010000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller \
(rev 01) Subsystem: Unknown device 6933:0002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ \
SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 168
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 30011000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 28000000-2bfff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller \
(PHY/Link) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device \
0024 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max), Cache Line \
Size: 64 bytes Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0007000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if b0)
Subsystem: Hewlett-Packard Company Pavilion ze4400 builtin IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] \
[size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) \
[disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, \
non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type \
3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 8080 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
Subsystem: Hewlett-Packard Company Pavilion ze4400
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- \
SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR-
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) \
Ethernet Controller Subsystem: Hewlett-Packard Company Pavilion ze4400 builtin \
Network Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- \
Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium \
>TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 90 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 8c00 [size=256]
Region 1: Memory at e0008000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 30000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1 (prog-if \
00 [VGA]) Subsystem: Hewlett-Packard Company Pavilion ze4400 builtin Video
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ \
SERR- FastB2B+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- \
<TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at e0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e0120000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- \
AGP3- Rate=x1,x2,x4 Command: RQ=16 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- \
Rate=x4 Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
What else?
Thanks!
Mikko
--
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic