[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-kernel
Subject:    Re: Problems with USB disk
From:       Bill Davidsen <davidsen () tmr ! com>
Date:       2007-08-10 4:54:40
Message-ID: 46BBEF90.7000808 () tmr ! com
[Download RAW message or body]

Greg KH wrote:
> On Tue, Aug 07, 2007 at 10:26:15PM +0200, Niels wrote:
>> Hi,
>>
>> I'm having problems with a new 500 GB USB disk. It works, but sometimes I
>> get these in dmesg:
>>
>>
>> usb 1-3: reset high speed USB device using ehci_hcd and address 2
>> usb 5-1: USB disconnect, address 2
>> drivers/usb/class/usblp.c: usblp0: removed
>> sd 0:0:0:0: Device not ready: <6>: Sense Key : 0x2 [current]
>> : ASC=0x4 ASCQ=0x2
>> end_request: I/O error, dev sda, sector 254148215
>> sd 0:0:0:0: Device not ready: <6>: Sense Key : 0x2 [current]
>> : ASC=0x4 ASCQ=0x2
>> end_request: I/O error, dev sda, sector 252434023
>> EXT3-fs error (device sda1): ext3_find_entry: reading directory #15761836
>> offset 0
>>
>>
>> There's also a printer connected. This is on a pci/usb2 card. When the above
>> happens, I get I/O errors. When I mount the drive next, there are errors
>> and often missing files. Quite annoying!
>>
>> Kernel is 2.6.21
>>
>> What's going on?
> 
> You have a low voltage issue, or a bad cable.  The device is
> electronically disconnecting itself.  Try using a externally-powered
> hub, or a new cable.
> 
I see the external drive becoming read-only, although I haven't checked 
the dmesg for the events, since other things in my system generate a 
bunch of output I have to wade through.

New cable, separate power, doesn't do it under 2.6.20-* Fedora or 
2.6.21.x kernel.org kernels.

I'll check the dmesg next time it happens, but I doubt a kernel version 
change would heal the hardware issues you mention.


-- 
Bill Davidsen <davidsen@tmr.com>
   "We have more to fear from the bungling of the incompetent than from
the machinations of the wicked."  - from Slashdot
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
[prev in list] [next in list] [prev in thread] [next in thread]