[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-kernel
Subject: [PATCH] I2C: lsb in emc6d102 and adm1027
From: Greg KH <gregkh () suse ! de>
Date: 2005-03-31 23:23:14
Message-ID: 11123113943693 () kroah ! com
[Download RAW message or body]
ChangeSet 1.2343, 2005/03/31 14:30:43-08:00, rafael.espindola@gmail.com
[PATCH] I2C: lsb in emc6d102 and adm1027
The attached patches add support for reading the lsb from the emc6d102
and change how they are read from the adm1027.
The lm85_update_device function decodes the LSBs to temp_ext and in_ext.
This strategy was suggested by Philip Pokorny.
The patch also changes some macros to use the SCALE macro. I think that
they become more readable this way.
Signed-off-by: Rafael Ávila de Espíndola <rafael.espindola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/chips/lm85.c | 100 ++++++++++++++++++++++++++++++++++++-----------
1 files changed, 77 insertions(+), 23 deletions(-)
diff -Nru a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c
--- a/drivers/i2c/chips/lm85.c 2005-03-31 15:16:46 -08:00
+++ b/drivers/i2c/chips/lm85.c 2005-03-31 15:16:46 -08:00
@@ -37,7 +37,7 @@
static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_5(lm85b, lm85c, adm1027, adt7463, emc6d100);
+SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
/* The LM85 registers */
@@ -77,6 +77,7 @@
#define LM85_VERSTEP_ADT7463C 0x6A
#define LM85_VERSTEP_EMC6D100_A0 0x60
#define LM85_VERSTEP_EMC6D100_A1 0x61
+#define LM85_VERSTEP_EMC6D102 0x65
#define LM85_REG_CONFIG 0x40
@@ -113,9 +114,13 @@
#define EMC6D100_REG_ALARM3 0x7d
/* IN5, IN6 and IN7 */
-#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5))
-#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2)
-#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2)
+#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5))
+#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2)
+#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2)
+#define EMC6D102_REG_EXTEND_ADC1 0x85
+#define EMC6D102_REG_EXTEND_ADC2 0x86
+#define EMC6D102_REG_EXTEND_ADC3 0x87
+#define EMC6D102_REG_EXTEND_ADC4 0x88
#define LM85_ALARM_IN0 0x0001
#define LM85_ALARM_IN1 0x0002
@@ -140,35 +145,36 @@
these macros are called: arguments may be evaluated more than once.
*/
-/* IN are scaled 1.000 == 0xc0, mag = 3 */
-#define IN_TO_REG(val) (SENSORS_LIMIT((((val)*0xc0+500)/1000),0,255))
-#define INEXT_FROM_REG(val,ext) (((val)*1000 + (ext)*250 + 96)/0xc0)
-#define IN_FROM_REG(val) (INEXT_FROM_REG(val,0))
-
/* IN are scaled acording to built-in resistors */
static int lm85_scaling[] = { /* .001 Volts */
2500, 2250, 3300, 5000, 12000,
3300, 1500, 1800 /*EMC6D100*/
};
#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from))
-#define INS_TO_REG(n,val) (SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255))
-#define INSEXT_FROM_REG(n,val,ext) (SCALE((val)*4 + (ext),192*4,lm85_scaling[n]))
-#define INS_FROM_REG(n,val) (INSEXT_FROM_REG(n,val,0))
+
+#define INS_TO_REG(n,val) \
+ SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
+
+#define INSEXT_FROM_REG(n,val,ext,scale) \
+ SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n])
+
+#define INS_FROM_REG(n,val) INSEXT_FROM_REG(n,val,0,1)
/* FAN speed is measured using 90kHz clock */
#define FAN_TO_REG(val) (SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534))
#define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val))
/* Temperature is reported in .001 degC increments */
-#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,-127,127))
-#define TEMPEXT_FROM_REG(val,ext) ((val)*1000 + (ext)*250)
-#define TEMP_FROM_REG(val) (TEMPEXT_FROM_REG(val,0))
-#define EXTTEMP_TO_REG(val) (SENSORS_LIMIT((val)/250,-127,127))
+#define TEMP_TO_REG(val) \
+ SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
+#define TEMPEXT_FROM_REG(val,ext,scale) \
+ SCALE((val)*scale + (ext),scale,1000)
+#define TEMP_FROM_REG(val) \
+ TEMPEXT_FROM_REG(val,0,1)
#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255))
#define PWM_FROM_REG(val) (val)
-#define EXT_FROM_REG(val,sensor) (((val)>>(sensor * 2))&0x03)
/* ZONEs have the following parameters:
* Limit (low) temp, 1. degC
@@ -356,7 +362,9 @@
u8 pwm[3]; /* Register value */
u8 spinup_ctl; /* Register encoding, combined */
u8 tach_mode; /* Register encoding, combined */
- u16 extend_adc; /* Register value */
+ u8 temp_ext[3]; /* Decoded values */
+ u8 in_ext[8]; /* Decoded values */
+ u8 adc_scale; /* ADC Extended bits scaling factor */
u8 fan_ppr; /* Register value */
u8 smooth[3]; /* Register encoding */
u8 vid; /* Register value */
@@ -537,7 +545,10 @@
static ssize_t show_in(struct device *dev, char *buf, int nr)
{
struct lm85_data *data = lm85_update_device(dev);
- return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr]) );
+ return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr,
+ data->in[nr],
+ data->in_ext[nr],
+ data->adc_scale) );
}
static ssize_t show_in_min(struct device *dev, char *buf, int nr)
{
@@ -618,7 +629,9 @@
static ssize_t show_temp(struct device *dev, char *buf, int nr)
{
struct lm85_data *data = lm85_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr]) );
+ return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+ data->temp_ext[nr],
+ data->adc_scale) );
}
static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
{
@@ -1109,6 +1122,9 @@
*/
kind = emc6d100 ;
} else if( company == LM85_COMPANY_SMSC
+ && verstep == LM85_VERSTEP_EMC6D102) {
+ kind = emc6d102 ;
+ } else if( company == LM85_COMPANY_SMSC
&& (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
@@ -1144,6 +1160,8 @@
type_name = "adt7463";
} else if ( kind == emc6d100){
type_name = "emc6d100";
+ } else if ( kind == emc6d102 ) {
+ type_name = "emc6d102";
}
strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
@@ -1261,7 +1279,6 @@
case LM85_REG_FAN_MIN(2) :
case LM85_REG_FAN_MIN(3) :
case LM85_REG_ALARM1 : /* Read both bytes at once */
- case ADM1027_REG_EXTEND_ADC1 : /* Read two bytes at once */
res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
break ;
@@ -1365,10 +1382,25 @@
* more significant bits that are read later.
*/
if ( (data->type == adm1027) || (data->type == adt7463) ) {
- data->extend_adc =
- lm85_read_value(client, ADM1027_REG_EXTEND_ADC1);
+ int ext1 = lm85_read_value(client,
+ ADM1027_REG_EXTEND_ADC1);
+ int ext2 = lm85_read_value(client,
+ ADM1027_REG_EXTEND_ADC2);
+ int val = (ext1 << 8) + ext2;
+
+ for(i = 0; i <= 4; i++)
+ data->in_ext[i] = (val>>(i * 2))&0x03;
+
+ for(i = 0; i <= 2; i++)
+ data->temp_ext[i] = (val>>((i + 5) * 2))&0x03;
}
+ /* adc_scale is 2^(number of LSBs). There are 4 extra bits in
+ the emc6d102 and 2 in the adt7463 and adm1027. In all
+ other chips ext is always 0 and the value of scale is
+ irrelevant. So it is left in 4*/
+ data->adc_scale = (data->type == emc6d102 ) ? 16 : 4;
+
for (i = 0; i <= 4; ++i) {
data->in[i] =
lm85_read_value(client, LM85_REG_IN(i));
@@ -1405,6 +1437,28 @@
/* More alarm bits */
data->alarms |=
lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
+ } else if (data->type == emc6d102 ) {
+ /* Have to read LSB bits after the MSB ones because
+ the reading of the MSB bits has frozen the
+ LSBs (backward from the ADM1027).
+ */
+ int ext1 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC1);
+ int ext2 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC2);
+ int ext3 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC3);
+ int ext4 = lm85_read_value(client,
+ EMC6D102_REG_EXTEND_ADC4);
+ data->in_ext[0] = ext3 & 0x0f;
+ data->in_ext[1] = ext4 & 0x0f;
+ data->in_ext[2] = (ext4 >> 4) & 0x0f;
+ data->in_ext[3] = (ext3 >> 4) & 0x0f;
+ data->in_ext[4] = (ext2 >> 4) & 0x0f;
+
+ data->temp_ext[0] = ext1 & 0x0f;
+ data->temp_ext[1] = ext2 & 0x0f;
+ data->temp_ext[2] = (ext1 >> 4) & 0x0f;
}
data->last_reading = jiffies ;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic