[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-kernel
Subject: Re: problems with SATA: 2.6.7 working, -bk12/13/-mm4 not
From: Jeff Garzik <jgarzik () pobox ! com>
Date: 2004-06-30 23:17:51
Message-ID: 40E34A1F.1040406 () pobox ! com
[Download RAW message or body]
Danny ter Haar wrote:
> 1U 19" server supermicro with ICH5 & P4.
>
> runs 2.6.7 vanilla without problems.
>
> tried -bk12/-bk13/-mm4 which won't work
> Machine is on serial console and captures output looks like
> this:
>
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 2595.0172 MHz.
> ..... host bus clock speed is 199.0628 MHz.
> checking TSC synchronization across 2 CPUs: passed.
> Brought up 2 CPUs
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfb1b0, last bus=2
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040326
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 *12 14 15)
> SCSI subsystem initialized
> PCI: Using ACPI for IRQ routing
> ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
> ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
> ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
> ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
> ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
> ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 16 (level, low) -> IRQ 16
> ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
> ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
> testing the IO APIC.......................
> .................................... done.
> Starting balanced_irq
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x0
> SGI XFS with ACLs, security attributes, no debug enabled
> SGI XFS Quota Management subsystem
> SELinux: Registering netfilter hooks
> Initializing Cryptographic API
> Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> loop: loaded (max 8 devices)
> Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
> Copyright (c) 1999-2004 Intel Corporation.
> ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
> e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> netconsole: not configured, aborting
> ata_piix: combined mode detected
> ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
> ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
> ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
> ata1: dev 1 ATA, max UDMA/100, 488397168 sectors: lba48
> ata1: dev 0 configured for UDMA/100
> ata1: dev 1 configured for UDMA/100
> scsi0 : ata_piix
> Using anticipatory io scheduler
> Vendor: ATA Model: Maxtor 6Y200M0 Rev: YAR5
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
> Type: Direct-Access ANSI SCSI revision: 05
> ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
> ata2: dev 0 ATAPI, max UDMA/33
> ata2: dev 0 configured for UDMA/33
> scsi1 : ata_piix
> SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
> SCSI device sda: drive cache: write back
> /dev/scsi/host0/bus0/target0/lun0:<3>ata1: command 0x25 timeout, stat 0xd0 hos4
> scsi0: ERROR on channel 0, id 0, lun 0, CDB: Read (10) 00 00 00 00 00 00 00 08
> Current sda: sense key Medium Error
> Additional sense: Unrecovered read error - auto reallocate failed
> end_request: I/O error, dev sda, sector 0
> ATA: abnormal status 0xD0 on port 0x1F7
> ATA: abnormal status 0xD0 on port 0x1F7
> ATA: abnormal status 0xD0 on port 0x1F7
Can you try:
* disabling combined mode in BIOS
* finding which -bk snapshot breaks your system
* acpi=off (disabling ACPI)
* noapic
* copying the following files verbatim into your 2.6.7-{bk12,bk13,mm4} tree:
drivers/scsi/libata*.[ch]
drivers/scsi/ata_*.c
drivers/scsi/sata_*.[ch]
include/linux/libata.h
include/linux/ata.h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic