[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-kernel
Subject: Re: Linux 2.4.21rc6-ac1
From: Andreas Haumer <andreas () xss ! co ! at>
Date: 2003-05-31 20:50:22
[Download RAW message or body]
Hi!
Alan Cox wrote:
> Linux 2.4.21rc6-ac1
[...]
> o Update ACPI to next Intel release (Bernhard Rosenkraenzer)
[...]
There seem to be some problems with this:
1.) drivers/hotplug/acpiphp_glue.c doesn't compile
I made the following patch to make it compile again.
I hope it is ok, please check (I don't have any PCI
hotplug device, so I can't test it myself).
--- acpiphp_glue.c.orig Sat May 31 20:24:42 2003
+++ acpiphp_glue.c Sat May 31 20:38:26 2003
@@ -807,27 +807,33 @@
find_host_bridge (acpi_handle handle, u32 lvl, void *context, void **rv)
{
acpi_status status;
- struct acpi_device_info info;
+ struct acpi_device_info *info;
char objname[5];
- struct acpi_buffer buffer = { .length = sizeof(objname),
- .pointer = objname };
+ struct acpi_buffer buffer;
- status = acpi_get_object_info(handle, &info);
+ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+ buffer.pointer = NULL;
+ status = acpi_get_object_info(handle, &buffer);
if (ACPI_FAILURE(status)) {
dbg("%s: failed to get bridge information\n", __FUNCTION__);
return AE_OK; /* continue */
}
- info.hardware_id[sizeof(info.hardware_id)-1] = '\0';
+ info = buffer.pointer;
+ info->hardware_id.value[sizeof(info->hardware_id.value)-1] = '\0';
/* TBD use acpi_get_devices() API */
- if (info.current_status &&
- (info.valid & ACPI_VALID_HID) &&
- strcmp(info.hardware_id, ACPI_PCI_HOST_HID) == 0) {
+ if (info->current_status &&
+ (info->valid & ACPI_VALID_HID) &&
+ strcmp(info->hardware_id.value, ACPI_PCI_HOST_HID) == 0) {
+ buffer.length = sizeof(objname);
+ buffer.pointer = objname;
acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
dbg("checking PCI-hotplug capable bridges under [%s]\n", objname);
add_bridges(handle);
}
+ ACPI_MEM_FREE (info);
+
return AE_OK;
}
2.) ACPI itself doesn't work right anymore and makes the system
unusable... :-(
It did work with the last AC kernel I tried (2.4.21-rc2-ac2)
Symptoms are:
No ethernet, NIC (Intel eepro100) doesn't get interrupts,
ACPI interrupt "storm" (millions of IRQ in a few minutes)
Booting with "acpi=off" makes the system work again, but without
ACPI, of course.
Here are a few more infos from the running system:
Asus P4B motherboard, P4 1.6GHz processor, 1.2GB RAM
root@install:~ {502} $ uname -a
Linux install 2.4.21-rc6-ac1 #1 SMP Sat May 31 20:04:18 CEST 2003 i686 unknown
root@install:~ {503} $ uptime
10:17pm up 5 min, 2 users, load average: 0.02, 0.13, 0.07
root@install:~ {504} $ lspci -v
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 8070
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [0104]
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f2000000-f35fffff
Prefetchable memory behind bridge: f3700000-f7ffffff
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 12) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f1000000-f1ffffff
Prefetchable memory behind bridge: f3600000-f36fffff
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Flags: bus master, medium devsel, latency 0
I/O ports at b800 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at b400 [size=32]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8028
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at b000 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12)
Subsystem: Asustek Computer, Inc.: Unknown device 8072
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at a800 [size=256]
I/O ports at a400 [size=64]
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti4200] (rev a3) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8047
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Memory at f3800000 (32-bit, prefetchable) [size=512K]
Expansion ROM at f37e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
02:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
Subsystem: Intel Corp. EtherExpress PRO/100+ Management Adapter with Alert On LAN*
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at f1800000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d800 [size=64]
Memory at f1000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
root@install:~ {505} $ lsmod
Module Size Used by Tainted: P
i810_audio 23944 0 (autoclean)
soundcore 3972 2 (autoclean) [i810_audio]
ac97_codec 10920 0 (autoclean) [i810_audio]
nfsd 67696 8 (autoclean)
nfs 69784 7 (autoclean)
lockd 47984 1 (autoclean) [nfsd nfs]
sunrpc 65596 1 (autoclean) [nfsd nfs lockd]
af_packet 13256 2 (autoclean)
slip 9056 4 (autoclean)
slhc 4608 2 (autoclean) [slip]
eepro100 18516 1 (autoclean)
mii 2464 0 (autoclean) [eepro100]
softdog 1692 1 (autoclean)
quota_v1 1848 10
nvidia 1546816 10
keybdev 1696 0 (unused)
mousedev 3896 1
hid 18308 0 (unused)
usbmouse 1820 0 (unused)
input 3552 0 [keybdev mousedev hid usbmouse]
uhci 24816 0 (unused)
usbcore 59488 0 [hid usbmouse uhci]
ext3 61924 4 (autoclean)
jbd 40152 4 (autoclean) [ext3]
ide-cd 28736 0 (autoclean)
cdrom 27712 0 (autoclean) [ide-cd]
unix 15880 104 (autoclean)
ext2 34336 4
ide-disk 13344 9
piix 7680 1
root@install:~ {506} $ cat /proc/interrupts
CPU0
0: 38742 XT-PIC timer
1: 422 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 2829 XT-PIC usb-uhci
9: 2997 XT-PIC usb-uhci, eth0
10: 6582 XT-PIC Intel ICH2
11: 25148 XT-PIC nvidia
12: 9 XT-PIC PS/2 Mouse
14: 22010 XT-PIC ide0
15: 33 XT-PIC ide1
NMI: 0
LOC: 38686
ERR: 0
MIS: 0
(Please find output of "dmesg" in attached file
"dmesg-2.4.21-rc6-ac1-acpioff")
And here's the interrupt configuration from the same kernel,
but with ACPI enabled, after about 3 minutes of uptime:
CPU0
0: 18132 IO-APIC-edge timer
1: 470 IO-APIC-edge keyboard
2: 0 XT-PIC cascade
9: 1 IO-APIC-edge eth0
14: 17434 IO-APIC-edge ide0
15: 34 IO-APIC-edge ide1
19: 24 IO-APIC-level usb-uhci
22: 7378056 IO-APIC-level acpi
23: 0 IO-APIC-level usb-uhci
NMI: 0
LOC: 18068
ERR: 0
MIS: 0
(dmesg output in attachment "dmesg-2.4.21-rc6-ac1-acpi")
Just for reference, here's some (IMHO) relevant information
from 2.4.21-rc2-ac2 on the same hardware:
[...]
May 16 18:52:37 install kernel: ENABLING IO-APIC IRQs
May 16 18:52:37 install kernel: init IO_APIC IRQs
May 16 18:52:37 install kernel: IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-23 not connected.
May 16 18:52:37 install kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
May 16 18:52:37 install kernel: number of MP IRQ sources: 17.
May 16 18:52:37 install kernel: number of IO-APIC #2 registers: 24.
May 16 18:52:37 install kernel: testing the IO APIC.......................
May 16 18:52:37 install kernel:
May 16 18:52:37 install kernel: IO APIC #2......
May 16 18:52:37 install kernel: .... register #00: 02000000
May 16 18:52:37 install kernel: ....... : physical APIC id: 02
May 16 18:52:37 install kernel: ....... : Delivery Type: 0
May 16 18:52:37 install kernel: ....... : LTS : 0
May 16 18:52:37 install kernel: .... register #01: 00178020
May 16 18:52:37 install kernel: ....... : max redirection entries: 0017
May 16 18:52:37 install kernel: ....... : PRQ implemented: 1
May 16 18:52:37 install kernel: ....... : IO APIC version: 0020
May 16 18:52:37 install kernel: .... register #02: 00000000
May 16 18:52:37 install kernel: ....... : arbitration: 00
May 16 18:52:37 install kernel: .... IRQ redirection table:
May 16 18:52:37 install kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
May 16 18:52:37 install kernel: 00 000 00 1 0 0 0 0 0 0 00
May 16 18:52:37 install kernel: 01 0FF 0F 0 0 0 0 0 1 1 39
May 16 18:52:37 install kernel: 02 001 01 0 0 0 0 0 1 1 31
May 16 18:52:37 install kernel: 03 0FF 0F 0 0 0 0 0 1 1 41
May 16 18:52:37 install kernel: 04 0FF 0F 0 0 0 0 0 1 1 49
May 16 18:52:37 install kernel: 05 0FF 0F 0 0 0 0 0 1 1 51
May 16 18:52:37 install kernel: 06 0FF 0F 0 0 0 0 0 1 1 59
May 16 18:52:37 install kernel: 07 0FF 0F 0 0 0 0 0 1 1 61
May 16 18:52:37 install kernel: 08 0FF 0F 0 0 0 0 0 1 1 69
May 16 18:52:37 install kernel: 09 0FF 0F 0 0 0 0 0 1 1 71
May 16 18:52:37 install kernel: 0a 0FF 0F 0 0 0 0 0 1 1 79
May 16 18:52:37 install kernel: 0b 0FF 0F 0 0 0 0 0 1 1 81
May 16 18:52:37 install kernel: 0c 0FF 0F 0 0 0 0 0 1 1 89
May 16 18:52:37 install kernel: 0d 0FF 0F 0 0 0 0 0 1 1 91
May 16 18:52:37 install kernel: 0e 0FF 0F 0 0 0 0 0 1 1 99
May 16 18:52:37 install kernel: 0f 0FF 0F 0 0 0 0 0 1 1 A1
May 16 18:52:37 install kernel: 10 000 00 1 0 0 0 0 0 0 00
May 16 18:52:37 install kernel: 11 000 00 1 0 0 0 0 0 0 00
May 16 18:52:37 install kernel: 12 000 00 1 0 0 0 0 0 0 00
May 16 18:52:37 install kernel: 13 000 00 1 0 0 0 0 0 0 00
May 16 18:52:37 install kernel: 14 000 00 1 0 0 0 0 0 0 00
May 16 18:52:37 install kernel: 15 000 00 1 0 0 0 0 0 0 00
May 16 18:52:37 install kernel: 16 0FF 0F 1 1 0 1 0 1 1 71
May 16 18:52:37 install kernel: 17 000 00 1 0 0 0 0 0 0 00
May 16 18:52:37 install kernel: IRQ to pin mappings:
May 16 18:52:37 install kernel: IRQ0 -> 0:2
May 16 18:52:37 install kernel: IRQ1 -> 0:1
May 16 18:52:37 install kernel: IRQ3 -> 0:3
May 16 18:52:37 install kernel: IRQ4 -> 0:4
May 16 18:52:37 install kernel: IRQ5 -> 0:5
May 16 18:52:37 install kernel: IRQ6 -> 0:6
May 16 18:52:37 install kernel: IRQ7 -> 0:7
May 16 18:52:37 install kernel: IRQ8 -> 0:8
May 16 18:52:37 install kernel: IRQ9 -> 0:9-> 0:22
May 16 18:52:37 install kernel: IRQ10 -> 0:10
May 16 18:52:37 install kernel: IRQ11 -> 0:11
May 16 18:52:37 install kernel: IRQ12 -> 0:12
May 16 18:52:37 install kernel: IRQ13 -> 0:13
May 16 18:52:37 install kernel: IRQ14 -> 0:14
May 16 18:52:37 install kernel: IRQ15 -> 0:15
May 16 18:52:37 install kernel: .................................... done.
May 16 18:52:37 install kernel: Using local APIC timer interrupts.
May 16 18:52:37 install kernel: calibrating APIC timer ...
May 16 18:52:37 install kernel: ..... CPU clock speed is 1614.4531 MHz.
May 16 18:52:37 install kernel: ..... host bus clock speed is 100.9032 MHz.
May 16 18:52:37 install kernel: cpu: 0, clocks: 1009032, slice: 504516
May 16 18:52:37 install kernel: CPU0<T0:1009024,T1:504496,D:12,S:504516,C:1009032>
May 16 18:52:37 install kernel: migration_task 0 on cpu=0
May 16 18:52:37 install kernel: ACPI: Subsystem revision 20030424
May 16 18:52:37 install kernel: PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=2
May 16 18:52:37 install kernel: PCI: Using configuration type 1
May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-22 -> 0xa9 -> IRQ 22)
May 16 18:52:37 install kernel: ACPI: Interpreter enabled
May 16 18:52:37 install kernel: ACPI: Using IOAPIC for interrupt routing
May 16 18:52:37 install kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
May 16 18:52:37 install kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
May 16 18:52:37 install kernel: PCI: Probing PCI hardware (bus 00)
May 16 18:52:37 install kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
May 16 18:52:37 install kernel: PCI: Probing PCI hardware
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17)
May 16 18:52:37 install kernel: 00:00:1f[B] -> 2-17 -> IRQ 17
May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-23 -> 0xb9 -> IRQ 23)
May 16 18:52:37 install kernel: 00:00:1f[C] -> 2-23 -> IRQ 23
May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19)
May 16 18:52:37 install kernel: 00:00:1f[D] -> 2-19 -> IRQ 19
May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc9 -> IRQ 16)
May 16 18:52:37 install kernel: 00:01:00[A] -> 2-16 -> IRQ 16
May 16 18:52:37 install kernel: Pin 2-17 already programmed
May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21)
May 16 18:52:37 install kernel: 00:02:09[A] -> 2-21 -> IRQ 21
May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-22 -> 0xa9 -> IRQ 22)
May 16 18:52:37 install kernel: 00:02:09[B] -> 2-22 -> IRQ 22
May 16 18:52:37 install kernel: Pin 2-23 already programmed
May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd9 -> IRQ 20)
May 16 18:52:37 install kernel: 00:02:09[D] -> 2-20 -> IRQ 20
May 16 18:52:37 install kernel: Pin 2-22 already programmed
May 16 18:52:37 install kernel: Pin 2-23 already programmed
May 16 18:52:37 install kernel: Pin 2-20 already programmed
May 16 18:52:37 install kernel: Pin 2-21 already programmed
May 16 18:52:37 install kernel: Pin 2-23 already programmed
May 16 18:52:37 install kernel: Pin 2-20 already programmed
May 16 18:52:37 install kernel: Pin 2-21 already programmed
May 16 18:52:37 install kernel: Pin 2-22 already programmed
May 16 18:52:37 install kernel: Pin 2-20 already programmed
May 16 18:52:37 install kernel: Pin 2-21 already programmed
May 16 18:52:37 install kernel: Pin 2-22 already programmed
May 16 18:52:37 install kernel: Pin 2-23 already programmed
May 16 18:52:37 install kernel: Pin 2-21 already programmed
May 16 18:52:37 install kernel: Pin 2-22 already programmed
May 16 18:52:37 install kernel: Pin 2-23 already programmed
May 16 18:52:37 install kernel: Pin 2-20 already programmed
May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-18 -> 0xe1 -> IRQ 18)
May 16 18:52:37 install kernel: 00:02:0e[A] -> 2-18 -> IRQ 18
May 16 18:52:37 install kernel: Pin 2-19 already programmed
May 16 18:52:37 install kernel: Pin 2-16 already programmed
May 16 18:52:37 install kernel: Pin 2-17 already programmed
May 16 18:52:37 install kernel: Pin 2-20 already programmed
May 16 18:52:37 install kernel: PCI: Using ACPI for IRQ routing
May 16 18:52:37 install kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
[...]
So, rc2-ac2 ACPI code already reported problems with the
ethernet NIC, but here it worked without problems, anyway.
Not so with the rc6-ac1 ACPI code...
On the positive side: i810 audio seems to work fine (no
problem with xmms playing MP3 over the network)
Some minor annoyance:
ACPI initialization reports "Error: only one processor found."
I know, this is a SMP kernel on a non-SMP motherboard, but
"Error" is quite a strong word for that situation.
IMHO, "Warning: ..." would be more appropriate, but YMMV
Regards,
- andreas
--
Andreas Haumer | mailto:andreas@xss.co.at
*x Software + Systeme | http://www.xss.co.at/
Karmarschgasse 51/2/20 | Tel: +43-1-6060114-0
A-1100 Vienna, Austria | Fax: +43-1-6060114-71
["dmesg-2.4.21-rc6-ac1-acpi" (text/plain)]
Linux version 2.4.21-rc6-ac1 (root@install) (gcc version 2.95.3 20010315 (release)) #1 SMP Sat May 31 20:04:18 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004fffc000 (usable)
BIOS-e820: 000000004fffc000 - 000000004ffff000 (ACPI data)
BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB HIGHMEM available.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
On node 0 totalpages: 327676
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 98300 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f75a0
ACPI: RSDT (v001 ASUS <P4B> 16944.11825) @ 0x4fffc000
ACPI: FADT (v001 ASUS <P4B> 16944.11825) @ 0x4fffc100
ACPI: BOOT (v001 ASUS <P4B> 16944.11825) @ 0x4fffc040
ACPI: MADT (v001 ASUS <P4B> 16944.11825) @ 0x4fffc080
ACPI: DSDT (v001 ASUS <P4B> 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x16] polarity[0x3] trigger[0x3])
Using ACPI (MADT) for SMP configuration information
Kernel command line: BOOT_IMAGE=lx2421rc6ac1 ro root=303 1
Initializing CPU#0
Detected 1614.410 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 3217.81 BogoMIPS
Memory: 1291828k/1310704k available (1113k kernel code, 18488k reserved, 503k data, 112k init, 393200k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04
per-CPU timeslice cutoff: 1462.69 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 0FF 0F 0 0 0 0 0 1 1 41
04 0FF 0F 0 0 0 0 0 1 1 49
05 0FF 0F 0 0 0 0 0 1 1 51
06 0FF 0F 0 0 0 0 0 1 1 59
07 0FF 0F 0 0 0 0 0 1 1 61
08 0FF 0F 0 0 0 0 0 1 1 69
09 0FF 0F 0 0 0 0 0 1 1 71
0a 0FF 0F 0 0 0 0 0 1 1 79
0b 0FF 0F 0 0 0 0 0 1 1 81
0c 0FF 0F 0 0 0 0 0 1 1 89
0d 0FF 0F 0 0 0 0 0 1 1 91
0e 0FF 0F 0 0 0 0 0 1 1 99
0f 0FF 0F 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 0FF 0F 1 1 0 1 0 1 1 71
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9-> 0:22
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1614.3270 MHz.
..... host bus clock speed is 100.8952 MHz.
cpu: 0, clocks: 1008952, slice: 504476
CPU0<T0:1008944,T1:504464,D:4,S:504476,C:1008952>
migration_task 0 on cpu=0
ACPI: Subsystem revision 20030522
PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=2
PCI: Using configuration type 1
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xa9 -> IRQ 22)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17)
00:00:1f[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xb9 -> IRQ 23)
00:00:1f[C] -> 2-23 -> IRQ 23
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19)
00:00:1f[D] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc9 -> IRQ 16)
00:01:00[A] -> 2-16 -> IRQ 16
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21)
00:02:09[A] -> 2-21 -> IRQ 21
Pin 2-23 already programmed
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd9 -> IRQ 20)
00:02:09[D] -> 2-20 -> IRQ 20
Pin 2-23 already programmed
Pin 2-20 already programmed
Pin 2-21 already programmed
Pin 2-23 already programmed
Pin 2-20 already programmed
Pin 2-21 already programmed
Pin 2-20 already programmed
Pin 2-21 already programmed
Pin 2-23 already programmed
Pin 2-21 already programmed
Pin 2-23 already programmed
Pin 2-20 already programmed
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xe1 -> IRQ 18)
00:02:0e[A] -> 2-18 -> IRQ 18
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-20 already programmed
PCI: No IRQ known for interrupt pin A of device 02:0a.0
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: Maxtor 6E040L0, ATA DISK drive
hdb: Maxtor 6E040L0, ATA DISK drive
hdd: CDU5211, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Partition check:
hda:end_request: I/O error, dev 03:00 (hda), sector 0
end_request: I/O error, dev 03:00 (hda), sector 2
end_request: I/O error, dev 03:00 (hda), sector 4
end_request: I/O error, dev 03:00 (hda), sector 6
end_request: I/O error, dev 03:00 (hda), sector 0
end_request: I/O error, dev 03:00 (hda), sector 2
end_request: I/O error, dev 03:00 (hda), sector 4
end_request: I/O error, dev 03:00 (hda), sector 6
unable to read partition table
hdb:end_request: I/O error, dev 03:40 (hdb), sector 0
end_request: I/O error, dev 03:40 (hdb), sector 2
end_request: I/O error, dev 03:40 (hdb), sector 4
end_request: I/O error, dev 03:40 (hdb), sector 6
end_request: I/O error, dev 03:40 (hdb), sector 0
end_request: I/O error, dev 03:40 (hdb), sector 2
end_request: I/O error, dev 03:40 (hdb), sector 4
end_request: I/O error, dev 03:40 (hdb), sector 6
unable to read partition table
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 776k freed
VFS: Mounted root (romfs filesystem) readonly.
Mounted devfs on /dev
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 18
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:DMA
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
/dev/ide/host0/bus0/target1/lun0: p1
VFS: Mounted root (ext2 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Mounted devfs on /dev
Freeing unused kernel memory: 112k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 1953464k swap-space (priority -1)
blk: queue c0316ec0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0317010, I/O limit 4095Mb (mask 0xffffffff)
hdd: attached ide-cdrom driver.
hdd: ATAPI 52X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04Aborted Command
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xb400, IRQ 19
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0xb000, IRQ 23
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4349 Thu Mar 27 19:00:02 PST 2003
ACPI: Power Button (FF) [PWRF]
hub.c: new USB device 00:1f.2-1, assigned address 2
input0: Logitech USB Mouse on usb1:2.0
Software Watchdog Timer: 0.05, timer margin: 60 sec
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
PCI: No IRQ known for interrupt pin A of device 02:0a.0
divert: allocating divert_blk for eth0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:C5:87:D6, IRQ 9.
Board assembly 734938-004, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
CSLIP: code copyright 1989 Regents of the University of California
SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256).
SLIP linefill/keepalive option.
divert: not allocating divert_blk for non-ethernet device sl0
divert: not allocating divert_blk for non-ethernet device sl1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out: status f048 0c00 at 0/60 command 0001a000.
["dmesg-2.4.21-rc6-ac1-acpioff" (text/plain)]
Linux version 2.4.21-rc6-ac1 (root@install) (gcc version 2.95.3 20010315 (release)) #1 SMP Sat May 31 20:04:18 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004fffc000 (usable)
BIOS-e820: 000000004fffc000 - 000000004ffff000 (ACPI data)
BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB HIGHMEM available.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
On node 0 totalpages: 327676
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 98300 pages.
Kernel command line: BOOT_IMAGE=lx2421rc6ac1 ro root=303 acpi=off
Found and enabled local APIC!
Initializing CPU#0
Detected 1614.433 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 3217.81 BogoMIPS
Memory: 1291832k/1310704k available (1113k kernel code, 18484k reserved, 503k data, 112k init, 393200k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04
per-CPU timeslice cutoff: 1462.69 usecs.
task migration cache decay timeout: 10 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1614.3283 MHz.
..... host bus clock speed is 100.8953 MHz.
cpu: 0, clocks: 1008953, slice: 504476
CPU0<T0:1008944,T1:504464,D:4,S:504476,C:1008953>
migration_task 0 on cpu=0
ACPI: Subsystem revision 20030522
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: Maxtor 6E040L0, ATA DISK drive
hdb: Maxtor 6E040L0, ATA DISK drive
hdd: CDU5211, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Partition check:
hda:end_request: I/O error, dev 03:00 (hda), sector 0
end_request: I/O error, dev 03:00 (hda), sector 2
end_request: I/O error, dev 03:00 (hda), sector 4
end_request: I/O error, dev 03:00 (hda), sector 6
end_request: I/O error, dev 03:00 (hda), sector 0
end_request: I/O error, dev 03:00 (hda), sector 2
end_request: I/O error, dev 03:00 (hda), sector 4
end_request: I/O error, dev 03:00 (hda), sector 6
unable to read partition table
hdb:end_request: I/O error, dev 03:40 (hdb), sector 0
end_request: I/O error, dev 03:40 (hdb), sector 2
end_request: I/O error, dev 03:40 (hdb), sector 4
end_request: I/O error, dev 03:40 (hdb), sector 6
end_request: I/O error, dev 03:40 (hdb), sector 0
end_request: I/O error, dev 03:40 (hdb), sector 2
end_request: I/O error, dev 03:40 (hdb), sector 4
end_request: I/O error, dev 03:40 (hdb), sector 6
unable to read partition table
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 776k freed
VFS: Mounted root (romfs filesystem) readonly.
Mounted devfs on /dev
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 18
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:DMA
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
/dev/ide/host0/bus0/target1/lun0: p1
VFS: Mounted root (ext2 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Mounted devfs on /dev
Freeing unused kernel memory: 112k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 1953464k swap-space (priority -1)
blk: queue c0316ec0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0317010, I/O limit 4095Mb (mask 0xffffffff)
hdd: attached ide-cdrom driver.
hdd: ATAPI 52X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04Aborted Command
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 5 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xb400, IRQ 5
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0xb000, IRQ 9
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4349 Thu Mar 27 19:00:02 PST 2003
hub.c: new USB device 00:1f.2-1, assigned address 2
input0: Logitech USB Mouse on usb1:2.0
Software Watchdog Timer: 0.05, timer margin: 60 sec
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
PCI: Found IRQ 9 for device 02:0a.0
divert: allocating divert_blk for eth0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:C5:87:D6, IRQ 9.
Board assembly 734938-004, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
CSLIP: code copyright 1989 Regents of the University of California
SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256).
SLIP linefill/keepalive option.
divert: not allocating divert_blk for non-ethernet device sl0
divert: not allocating divert_blk for non-ethernet device sl1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Intel 810 + AC97 Audio, version 0.24, 20:49:16 May 31 2003
PCI: Found IRQ 10 for device 00:1f.5
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH2 found at IO 0xa400 and 0xa800, MEM 0x0000 and 0x0000, IRQ 10
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic