[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-ipsec
Subject:    Re: [Users] IPSEC installation/configuration for iPAQ
From:       Sam Sgro <sam () freeswan ! org>
Date:       2003-10-31 4:50:48
[Download RAW message or body]

-----BEGIN PGP SIGNED MESSAGE-----

On Thursday 30 October 2003 16:58, akagarwa@ncsu.edu wrote:
> 1. Is the procedure, i have followed above,  correct or am i missing
> something?
> 2. I have not been able to find out exact steps how to configure
> ipsec.conf/ipsec.secrets for iPAQ  and steps to start ipsec services in
> iPAQ, Could anybody help me out in this, it would be greatly apprecieted.

I can't answer either of these questions. I can tell you that one way to start 
the ipsec service would be via running the command "ipsec setup start".

> 3. Is the case described avobe same as the case "roadwarrior-net"
> connection given on freeswan site?

If you're going to be at different addresses in that wireless segment, then 
yes. Also, if you just intend to connect to the "home agent" itself, then you 
wouldn't specify a subnet. If you intend to use this connection to protect 
all your traffic to the rest of the 'net, then you'd want to define the 
subnet as 0.0.0.0/0 (ie, the entire 'net is "behind" the home agent".)

- -- 
Sam Sgro
sam@freeswan.org

-----BEGIN PGP SIGNATURE-----
Version: 2.6.3ia
Charset: noconv
Comment: For the matching public key, finger the Reply-To: address.

iQCVAwUBP6HqKEOSC4btEQUtAQETYwP9Fetc8fq57QjFdx6mQqgZh9YY1wwYLSm0
V90qco8Gh4Bw3DNuwLYY2rW2eXNfqEXtJ1ENAI7vdrh2iV0xtBPIMeiaPankxpj+
K+8rJchyb0SzBnTKvG5LU33KuntTda0pfMM3oU85PnIHEX5s9Aw/8xVF3Et8BzW7
gqyJWBovhY0=
=7VNE
-----END PGP SIGNATURE-----

_______________________________________________
FreeS/WAN Users mailing list
users@lists.freeswan.org
https://mj2.freeswan.org/cgi-bin/mj_wwwusr

[prev in list] [next in list] [prev in thread] [next in thread]