[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-iio
Subject: Re: active_scan_mask
From: Henk Medenblik <iio-developer () freedom ! nl>
Date: 2021-05-27 10:06:08
Message-ID: 46567041-1dbf-2b00-3500-011fd722e2fc () freedom ! nl
[Download RAW message or body]
Dear Alexandru,
> That should be happening in drivers/iio/industrialio-buffer.c in the
> iio_enable_buffers() function.
> The channels get enabled by writing via sysfs in
> /sys/bus/iiio/devices/iio:deviceX/scan_elements in the _en files.
>
> libiio typically does this manipulation of files for you
I thought so too and I can confirm that when I switch back to less
channels that the others are disabled. However the scanmask is not updated.
See some logging here trying to debug:
Session 1, read 8 channels:
iio_readdev -b 262144 -s 1024 iio:device0 voltage0 voltage1 voltage2
voltage3 voltage4 voltage5 voltage6 voltage7 > /mnt/test6.bin
8 active channels
[ 513.529510] acq_buffer_preenable
[ 513.529521] active scan mask: 0x000000FF
[ 513.558286] acq_buffer_postenable
[ 513.716868] acq_buffer_predisable
Session 2, read 16 channels:
iio_readdev -b 262144 -s 1024 iio:device0 voltage0 voltage1 voltage2
voltage3 voltage4 voltage5 voltage6 voltage7 voltage8 voltage9 voltage10
voltage11 voltage12 voltage13 voltage14 voltage15 > /mnt/test6.bin
16 active channels
[ 523.834056] acq_buffer_preenable
[ 523.834067] active scan mask: 0x0000FFFF
[ 523.880440] acq_buffer_postenable
[ 524.041383] acq_buffer_predisable
Session3 , read 8 channels again:
iio_readdev -b 262144 -s 1024 iio:device0 voltage0 voltage1 voltage2
voltage3 voltage4 voltage5 voltage6 voltage7 > /mnt/test6.bin
8 active channels
[ 532.002019] acq_buffer_preenable
[ 532.002030] active scan mask: 0x0000FFFF
[ 532.048375] onr_acq_buffer_postenable
[ 532.131081] onr_acq_buffer_predisable
> so, are you using an Analog Devices kernel?
> or is this a vanilla mainline kernel? and which version?
> ADI has some custom patches that deal with this some scanmask manipulation;
> is this being reproduced purely with libiio? and which version of libiio?
> steps to reproduce?
>
> i'm still not sure if the issue is in kernel or in libiio;
>
Yes I am using a adi 4.14 kernel, git tag adi-4.14.0 15e1a16477
For iio_readdev I am currently using the v0.21 zerocopy checkout
Henk
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic