[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-iio
Subject: [PATCH v4 2/6] dt-bindings: iio: accel: fxls8962af: add bindings
From: Sean Nyekjaer <sean () geanix ! com>
Date: 2021-04-29 12:28:02
Message-ID: 20210429122806.3814330-2-sean () geanix ! com
[Download RAW message or body]
Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF
accelerometer sensor.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
Changes for v2:
- removed requirement for interrupt
Changes for v3:
- None
Changes for v4:
- Included the dt patch from the RFC
.../bindings/iio/accel/nxp,fxls8962af.yaml | 82 +++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml \
b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml new file mode \
100644 index 000000000000..e0e5542377df
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver
+
+maintainers:
+ - Sean Nyekjaer <sean@geanix.com>
+
+description: |
+ NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports
+ SPI and I2C interface.
+ https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
+ https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
+
+properties:
+ compatible:
+ enum:
+ - nxp,fxls8962af
+ - nxp,fxls8964af
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: phandle to the regulator that provides power to the accelerometer
+
+ spi-max-frequency: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ maxItems: 1
+ items:
+ enum:
+ - INT1
+ - INT2
+
+ drive-open-drain:
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Example for a I2C device node */
+ accelerometer@62 {
+ compatible = "nxp,fxls8962af";
+ reg = <0x62>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "INT1";
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Example for a SPI device node */
+ accelerometer@0 {
+ compatible = "nxp,fxls8962af";
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "INT1";
+ };
+ };
--
2.31.0
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic