[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: [PATCH v2 7/7] ata: libata-scsi: improve ata_scsiop_maint_in()
From: Niklas Cassel <niklas.cassel () wdc ! com>
Date: 2022-12-29 16:53:46
Message-ID: 20221229170005.49118-8-niklas.cassel () wdc ! com
[Download RAW message or body]
From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Allow translation of REPORT_SUPPORTED_OPERATION_CODES commands using
the command format 0x3, that is, checking support for commands that are
identified using an opcode and a service action.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
---
drivers/ata/libata-scsi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e1c43f9f6bb2..46109bde8a04 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3266,11 +3266,12 @@ static unsigned int ata_scsiop_maint_in(struct ata_scsi_args *args, u8 *rbuf)
u8 supported = 0;
unsigned int err = 0;
- if (cdb[2] != 1) {
+ if (cdb[2] != 1 && cdb[2] != 3) {
ata_dev_warn(dev, "invalid command format %d\n", cdb[2]);
err = 2;
goto out;
}
+
switch (cdb[3]) {
case INQUIRY:
case MODE_SENSE:
--
2.38.1
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic